Zalman have now made their most accessible watercooling product yet. The CNPS20LQ is a factory-sealed CPU liquid cooler, meaning no more maintenance
- just a lifetime of the highest efficiency cooling & extremely low running noise. Features Sealed Watercooling CPU Cooler Excellent performance Quiet 120mm PWM fan supplied Integrated pump Compatible with Intel LGA2011/1155/1156/1366 & AMD FM1/AM3+/AM3/AM2+/AM2

Specification Compatibility Intel LGA2011/1155/1156/1366 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP All Installation Method Intel & AMD
- backplate, requires motherboard removal

Dimensions 135 (L) x 120 (W) x 38 (H)mm Weight 195g Materials Fins: Aluminium / Base: Copper Fan PWM 120mm Fan Fan

Dimensions 120 (L) x 120 (W) x 25 (H)mm Fan RPM 900 ~ 2, 000 ± 10% Fan Bearing Long life bearing PWM Duty Cycle 30 ~ 100 ± 5% Connector 4-Pin (Fan), 3-Pin (Pump) Rated Voltage 12V Warranty 24 months EAN barcode 8809213763090







...

Powerful dual-tower cooler from Zalman for CPUs up to 300 watts TDP. made from copper & aluminum, the cooler comes with specially designed 4D stereoscopic corrugated slats, six heatpipes with patented RDTH technology, & a long-lasting 140mm dual-blade fan. The integrated RGB LED lighting is compatible with Razer Chroma & the Zalman Z-Sync software.

Features: Copper & aluminium CPU dual tower coolers for best cooling performance Special 4D stereoscopically waved fin structure Six heatpipes with RDTH design for large contact surface Two 140mm dual bladed design fans for increased airflow Addressable RGB LED lighting, compatible with Razer Chroma & Zalman Z-Sync High RAM compatibility Including powerful ZM-STC8 thermal compound Suitable for processors with up to 300 Watt TDP Optimized output airflow provides more efficient cooling With the CPU cooler CNPS20X sets Zalman to six heatpipes with RDTH technology (Reverse Direct Touch heat pipe). The heatpipes are not directly on the IHS of the CPU. This creates a larger area where heat can be absorbed & dissipated. Outstanding performance & efficiency make the Zalman CNPS20X suitable for processors with up to 300 watts of TDP (Thermal Design Power). The cooling fins are wavy. This special form creates a total of 180 areas in which the air flow is channelled & turbulence is prevented. At the same time, this ensures that the air can flow evenly through the fins. This patented structure is made by Zalman 4D stereoscopically waved fin design. Also special are the enclosed fans. The two 140 mm fans operate at 800 to 1, 500 rpm & scoop up to 61 CFM of air per hour with a maximum noise level of 29 d B (A). The dual-blade design of the rotor blades increases the airflow & ensures effective channelling of the air flow. The durable FDB bearing guarantees a life expectancy of 100, 000 operating hours. The special fan frame & anti-vibration pads minimize vibration & disturbing noises. The central placement of the heatpipes & the high angle of the cooling towers to the bottom plate ensure high RAM compatibility. This means that even RAM modules with their own oversized heat sinks can be installed, no matter in which direction the Zalman CNPS20X is placed. The striking, integrated RGB LED lighting of the two fans is compatible with Razer Chroma & the Z-Sync software from Zalman. With a 3-pin header connected to a motherboard or RGB controller, the lighting can be easily synchronized with other RGB components. Thanks to the ingenious mounting system, installation is childs play & Zalman installs a powerful thermal grease on the radiator with the ZM-STC8. Technical

Details:

Dimensions radiator: 140 x 170 x 165 mm (W x H x D)

Dimensions fan: 140 x 26 x 140 mm (W x H x D) Weight: 1.3kg

Material: aluminium, copper

Colour: silver, copper, black Heatpipes: 6 TDP: 300W Fan: 2x 140 mm SF140

Colour: Black Connection: 2x 4-pin PWM, 2x 3-pin RGB (5VDG, 5V) Speed: 800 to 1, 500 rpm

Volume: max. 29 d B (A) Delivery

Volume: max. 61 CFM / 103.64 m&sup 3; / h Static pressure: max. 1.1 mm H2O Lifespan: 100, 000 hours Power consumption: Fan: 3.36 W / LED: 15 W Amperage: Fan: 0.28 A / LED: 0.3 A Compatibility: Intel Socket 1200, 115x, 2011, 2011-v 3, 2066 AMD Socket AM3, AM4 Maximum RAM

Height: 33 mm (fan up) 47 mm (up to cooling tower)



















...

The Zalman CNPS4X Optima II offers despite its compact design, ordinary 95 watt TDP & is suitable for cooling high-performance processors. Thanks to the four copper heat pipes running through the base plate, the heat quickly reaches the aluminum fins, through which a directly attached, quiet 92 mm fan transports the air away. The Zalman CNPS4X CPU cooler at a glance: Silver tower cooler with up to 95W TDP cooling capacity Two U-shaped direct-touch heat pipes made from copper Including 92 PWM fan Uncomplicated assembly Including Zalman thermal paste High compatibility with AMD & Intel Zalman CNPS4X: powerful & compact tower cooler The Zalman CNPS4X is a compact tower cooler with two U-shaped heat pipes made from copper. These run through the base plate so that they touch the processor directly. The contact surface thus consists of both aluminium & copper. The heat is transferred particularly quickly into the heat pipes & from there into the aluminium fins of the cooler. The supplied 92 mm fan ensures that the heat is quickly removed. To ensure smooth running & long durability, Zalman has equipped it with a particularly quiet EBR bearing (enhanced bearing by rolling element). The 92 fan rotates at a maximum of 2000 rpm & generates a very low noise level at one with a maximum of 28 db (A) Delivery volume of 74.75 m&sup 3; / h (44 CFM). The Zalman CNPS4X Optima II is compatible with many popular AMD & Intel sockets. Technical

Details: General:

Dimensions (with fans): 95 x 132 x 65 mm (W x H x D) Weight (with fan): approx. 360 g

Material: copper (heat pipes), aluminum (base plate, fins), plastic (fan) Colour: Silver / copper (cooler), black (fan) Heatpipes: 2x copper Fan: 1x 92 x 92 x 25 mm Connection: 4-pin PWM Revolutions: max. 2000 rpm Volume flow: 74.75 m&sup 3; / h (44 CFM) Air pressure: 1.71 mm H2O

Volume: max. 28 d B (A) Operating voltage: 12 V. Compatibility: Intel socket: 775, 115x, 1200 AMD socket: AM4, AM3 (+), FM2 (+)







...

Zalman CNPS5X Performa Heatsink & Fan Specification: Application: Socket 1155 Socket 1156 Socket 775 Socket FM1 Socket AM2 Socket AM2+ Socket AM3 Socket AM3+ Socket 940 Socket 939 Socket 754 Type: Heatsink & Fan Fan Speed: 1400-2800 RPM Noise: 20-32d B Bearing Type: FDB (Fluid Dynamic Bearing) Heatsink/ Block

Material: Pure Copper & Aluminum Special

Features: Powerful Cooling Performance Ultra Quiet 92mm Fluid Shield Bearing Fan PWM Fan Control Easy Installation Versatile Compatibility



...

Zalman are well known for producing some of the worlds best designed CPU coolers. It is therefore rare for them to produce a cooler that is designed primarily for quietly cooling sub 100W CPUs, but that is exactly the job for which the CNPS5X is designed. Features Excellent value for your money Three U-shaped heatpipes 92mm PWM controlled fan Noise level from 20.0 d B (A) Compatible with Intel LGA1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Specifications Compatibility Intel LGA1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Max TDP All Installation Method Intel & AMD
- push-pins or clips, does not require motherboard removal Heatsink

Dimensions, mm 127 (L) x 64 (W) x 134 (H) Materials Pure aluminium & copper Heatpipes 3 x U-shaped heatpipes Supplied thermal grease ZM-STG2M Fan size 92mm Fan connector 4-pin PWM Control, Auto restart Fan rotational speed 1400
- 2800 RPM ±10% Fan noise level 20.0
- 32.0 d BA Fan bearing type FSB (Fluid Shield Bearing) Fan nominal voltage 12V DC Weight 320g Warranty 24 months EAN barcode 8809213762369




...

Better performance, easier installation! These new additions to the famous Zalman 7000 series give guaranteed cooling satisfaction! They offer slightly enhanced performance to the CNPS7700 coolers & are smaller, lighter, have blue LED lighting & offer AM2 socket compatibility. Features
- 1. Same performance as CNPS7700 but more compact & easier installation 2. Incredible thermal efficiency from 0.17 °C/W max 3. 360 degree copper fin design is beautiful & effective 4. 110mm blue LED fan for best airflow & minimal noise 5. FANMATE2 variable fan speed controller included 6. Compatible with Intel LGA1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Product differences The CNPS7500 is offered in two versions
- copper (CU) & aluminium/copper hybrid (ALCU). Both coolers are identical except that the CU version is heavier & offers better cooling thanks to the superior conduction of copper versus aluminium. In practice this equates to a lower CPU running temperature of around 3°C for a high-end system. If you crave the lowest possible CPU temperature then we suggest you purchase the CU version, but otherwise the ALCU version still offers excellent performance & is less expensive. Motherboard cooling As with all Zalman's 7000 series coolers, the unique design of the product allows not only the processor to be cooled, but also its surrounding components as shown on the image below. Important components such as the Northbridge chip, RAM, VGA & FET circuitry receive a good share of the cooler's airflow, which increases their reliability & lifespan. Compatibility considerations Socket 775-based motherboards will need to be removed from the chassis to be able to install the CNPS7500. The CNPS7500 is incompatible with Athlon XP (socket A, 462) & Pentium 3 (Socket 370). Specifications
- Compatibility
- Intel LGA1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Max TDP
- All except up to 95W for FM1, AM3+, AM3 & AM2+ Installation Method
- Intel
- screws, requires motherboard removal; AMD
- clips, does not require motherboard removal Base material
- Pure Copper Thermal resistanc
- 0.17
- 0.23°C/W * Weight
- 848g Heatsink

Dimensions
- 121 (L) x 121 (W) x 67 (H) mm Surface area
- 3500 sq cm Fan

Dimensions
- 110 x 110 x 25 mm Rotational speed
- 1150
- 2300 RPM * Acoustic noise level
- 17
- 32 d BA * Fan bearing type
- 2-Ball FANMATE2

Dimensions
- 70 (L) x 26 (H) x 26 (W) mm FANMATE2 weight
- 20g FANMATE2 output voltage
- 5
- 11 VDC FANMATE2 maximum fan wattage
- 6 W FANMATE2 cable length
- 800 mm































...

Zalman have updated their premium low-profile cooler, CNPS8000A. The new CNPS8000B now has a 92mm PWM fan & offers better performance than its predecessor. Because CPUs are getting hotter & hotter, we have seen heatsinks getting bigger & bigger to cope with the cooling demands. The problem with very large heatsinks is that they sometimes cannot be used in a lower profile chassis where space is at a premium. Zalman have successfully addressed this problem with the CNPS8000b without sacrificing performance. 1. Noiseless & vibration-free in silent mode, from 20d B 2. Four heatpipes for quicker heat dispersion 3. Optimised fins for high performance & low weight 4. Low profile cooler, only 66mm tall 5. Supplied with a quiet 92mm PWM fan, from 20d BA 6. Compatible with Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 At only 66 mm tall, the CNPS8000b is capable of cooling any CPU with which it is compatible. It does this with the aid of four C-shaped heatpipes that transfer the heat from the copper base to the top edge of the fins. This allows the whole heatsink to be used more efficiently. Attached above the heatsink is a legendary Zalman 92mm PWM fan which has been designed to vary its speed depending on the temperature of the CPU. The minimum noise is only 20 d BA, but when the CPU is pushed to its limit, the fan speed can increase to provide more cooling. Of course this works in reverse; the fan speed will decrease as the temperature of the CPU drops. This method gives the user piece of mind knowing that when the CPU needs it, extra cooling is provided.

Specification
- Compatibility
- Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal

Dimensions
- 108 (L) X 108 (W) X 66 (H)mm Weight
- 330g Materials
- Fins: Aluminium / Base: Copper Dissipation Area
- 2872 cm 2 Heatpipes
- 4 C-Shaped Heatpipes Fan
- 4-pin 92mm PWM Fan Fan RPM
- 1400 to 2800rpm ±10% Noise
- 20 to 32 d BA ±10% Fan Bearing
- FSB (Fluid Shield Bearing)

















...

The Zalman CNPS80G REV.1 CPU Cooler features an ultra quiet 85mm PWM fan, excellent cooling performance & easy installation. The CPU cooler is fully compatible with the latest high performance Intel & AMD processors. Featuring FHS (Flower Heatsink) technology by producing 3 dimensional radial shape finds through the compression process of an aluminium plate. Technical Specifications Socket Type: Intel: LGA115X / 775 / CPUs /LGA1200 AMD: AM4 / AM3+ / AM3 CPUs Dimensions: 123.7 (L) x 102 (W) x 61.4 (H)mm Weight: 180g Materials: Pure Aluminum Heat Dissipation Area: 2, 268&13216; TDP: 65W Bearing Type: Long Life Bearing Fan Speed: 1, 000~2, 000 ± 10% RPM Max Noise Level: 25.3 d BA ± 10% Max Airflow :27.18 CFM Max. Air Pressure :1.51mm H&8322;O Life Span: 50, 000 hours Power Consumption :1.2W Rated Voltage: 12V Rated Current :0.1A Fan Connector Type: 4-Pin PWM ...

Zalman's latest compact 'top down' CPU coolers offer two heat-pipes & copper coated aluminium fins that are designed for maximum cooling while the down draft from the quiet 110mm fan cools not only the CPU but also provides powerful cooling of other motherboard components around the cooler. Features
- 1. Compatible with slim tower / low profile HTPCs, only 60mm tall 2. Automatic fan speed control with PWM enabled fan 3. Patented curved heatpipe design 4. Ultra-thin 0.2mm fins for minimised weight 5. Compatible with Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2

Specification
- Compatibility
- Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal

Dimensions
- 120 (L) x 120 (W) x 60 (H)mm Weight
- 400g Material
- Fin Aluminium, Base Copper Dissipation Area
- 1960 cm 2 Heatpipes
- 2 Fan
- 110mm Black PWM Fan Fan Bearing
- Long Life Bearing Fan RPM
- 1000 to 1500 RPM ±10% Noise
- 19 to 25 d BA ±10% Rated Voltage
- 12V



















...

The primary innovation of the CNPS9500 lies in the patented ‘figure of 8’ shape bending of the heatpipes. This produces the effect of up to six heatpipes when in actual fact there are only three. The excellent cooling performance & efficiency of the CNPS9500A-LED is achieved by the aerodynamically designed ultra-slim heatsink fins & their performance optimised layout. This layout reduces airflow resistance & minimises the weight of the cooler.

Specification CPU socket compatibility
- Intel 775, 1156, AMD AM3, AM2+, AM2, 940, 939, 754 CPU Supported
- Pentium 4, Celeron D, Pentium D, Core 2 Duo, Core 2 Quad, Core 2 Extreme, Core i 7, Core i 5, Core i 3, Sempron, Athlon, Athlon FX, Opteron, Dual-Core Opteron, Phenom, Athlon X2, Phenom II, Athlon II Heatsink

Dimensions mm
- 85 (L)x 112 (W)x 125 (H) Materials
- Pure copper Weight
- 530g Dissipation surface area
- 3, 698sq.cm Fan

Dimensions
- 92x 92x 25mm Fan illumination
- Blue













...