The SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS converts AC input to DC power, & then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online & battery modes. An interactive front-panel LCD interface provides detailed real-time UPS status & advanced setup & configuration options. In case of AC power outage, the internal batteries support 13.5 minutes of runtime at half load & five minutes at full load. Extended runtime is possible with optional external battery packs. “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement. An intelligent battery management system extends battery life. Managing the UPS is simplified through the interactive front-panel LCD interface, which displays operating conditions & diagnostic data, such as load & battery levels. You can set power strategies to reflect your protection priorities, whether it’s precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems. This UPS is ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict efficiency guidelines set by the U.S. Environmental Protection Agency. Power is filtered to protect connected equipment against surges & EMI/RFI line noise that can damage equipment or destroy data. Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide. Adding an optional network management card, such as Tripp Lite's SNMPWEBCARD network interface, permits remote management of the UPS, including reboots & activity logs.
- Zero transfer time suitable for advanced network applications
- 2% output voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- Features 2 C19 & 8 C13 outlets
- Meets strict ENERGY STAR efficiency guidelines
- SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS
- 4-post rack-mount installation kit
- USB (Universal Serial Bus) cable
- RS-232 cable
- C19-to-C20 power cable
- (2) C13-to-C14 power cables
- Owner’s manual
- Converts AC input to DC power, then DC to fully regulated sine wave AC output
- +/-2% voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- 3000VA/2700W capacity
- 2 C19 & 8 C13 outlets
- 570-joule surge suppression rating
- Supports tower installation with 2-9USTAND accessory
- Interactive Front-Panel LCD reports detailed status information, including load & battery levels
- Offers advanced configuration options, including output voltage & power strategies
- Auto Adaptive enables high efficiency & high-quality operation as necessary for ideal equipment protection
- Max Efficiency favors economy operation with high 95% efficiency
- Max Quality favors on-line, double-conversion mode, maintaining +/-2% output voltage regulation & zero transfer time
- Frequency Regulation & Frequency Conversion enable +/-0.05 Hz output regulation for selected frequency (50/60 Hz)
- Supports half load (1350W) for 13.5 min. & full load (2700W) for 5 min.
- Add external battery packs for extra runtime
- “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement
- Full 2700W capacity available with & without external battery packs
- Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries Highly Customizable
- Customize communications & behavior to integrate with device makers’ specific needs
- Selectable auto-restart from 0 to 60 sec. after AC power is restored
- Selectable minimum battery charge level before auto-restart
- Schedule system reboot if USB (Universal Serial Bus) signal from connected device is lost
- Set overload thresholds & low battery levels for alert & shutdown
- Remote on/off (toggle) support via DB9
- ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict EPA efficiency guidelines
- Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide SNMP/ Web Capability
- Optional Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates & activity logs