Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency & load levels via built-in network connection. Power Alert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories.

...

Tripp Lite's Smart Rack SRCABLERINGVRT helps eliminate cable stress by organizing the cables within the Smart Rack enclosure or open rack cabinet. The vertical cable manager (flexible ring type) is 6-ft high & split into two 3-ft sections to allow for multiple installation options. SRCABLERINGVRT offers toolless button mounting. ...

Featuring true on-line operation with pure sine wave output, zero transfer time to battery & complete UPS replacement capability with no downtime, the SU6000RT4UHVHW provides the highest level of protection available for mission-critical equipment from power outages, voltage fluctuations & transient surges. It converts incoming AC power to DC, & re-converts it back to filtered AC output with a pure sine wave, isolating connected components from all power problems in high-voltage environments. The SU6000RT4UHVHW has a 6k VA/5400W capacity & hardwire output. With its detachable PDU with bypass switch, the SU6000RT4UHVHW is easily hot-swappable by a user of any skill set—no need for lengthy & expensive service calls, & no downtime if a repair or battery replacement is needed. In bypass mode, the PDU passes power to equipment without the use of the power & battery modules, allowing them to be removed while keeping your application in operation. UPS battery backup keeps connected equipment operational through short power failures, & provides time to save data & perform an orderly system shutdown in case of a prolonged blackout. The SU6000RT4UHVHW’s runtime can be expanded with optional external battery packs. The SU6000RT4UHVHW features a highly efficient (96%) economy mode setting that can significantly reduce a facility's energy costs by minimizing heat output, reducing cooling requirements & consuming less electricity. An LCD display with LED indicators enables IT personnel to operating modes & conditions. The LCD/LED panel rotates for viewing in horizontal rack or vertical tower installations &

Includes:: an audible alarm that signals various conditions.

...

Tripp Lite SU8000RT3UHW 8000VA / 8k VA / 7200 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance & simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets & rugged industrial locations. ...

Tripp Lite SU8000RT3UG 8000VA / 8k VA / 7200 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance & simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets & rugged industrial locations. ...

The SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS converts AC input to DC power, & then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online & battery modes. An interactive front-panel LCD interface provides detailed real-time UPS status & advanced setup & configuration options. In case of AC power outage, the internal batteries support 13.5 minutes of runtime at half load & five minutes at full load. Extended runtime is possible with optional external battery packs. “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement. An intelligent battery management system extends battery life. Managing the UPS is simplified through the interactive front-panel LCD interface, which displays operating conditions & diagnostic data, such as load & battery levels. You can set power strategies to reflect your protection priorities, whether it’s precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems. This UPS is ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict efficiency guidelines set by the U.S. Environmental Protection Agency. Power is filtered to protect connected equipment against surges & EMI/RFI line noise that can damage equipment or destroy data. Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide. Adding an optional network management card, such as Tripp Lite's SNMPWEBCARD network interface, permits remote management of the UPS, including reboots & activity logs.
- Zero transfer time suitable for advanced network applications
- 2% output voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- Features 2 C19 & 8 C13 outlets
- Meets strict ENERGY STAR efficiency guidelines
- SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS
- 4-post rack-mount installation kit
- USB (Universal Serial Bus) cable
- RS-232 cable
- C19-to-C20 power cable
- (2) C13-to-C14 power cables
- Owner’s manual
- Converts AC input to DC power, then DC to fully regulated sine wave AC output
- +/-2% voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- 3000VA/2700W capacity
- 2 C19 & 8 C13 outlets
- 570-joule surge suppression rating
- Supports tower installation with 2-9USTAND accessory
- Interactive Front-Panel LCD reports detailed status information, including load & battery levels
- Offers advanced configuration options, including output voltage & power strategies
- Auto Adaptive enables high efficiency & high-quality operation as necessary for ideal equipment protection
- Max Efficiency favors economy operation with high 95% efficiency
- Max Quality favors on-line, double-conversion mode, maintaining +/-2% output voltage regulation & zero transfer time
- Frequency Regulation & Frequency Conversion enable +/-0.05 Hz output regulation for selected frequency (50/60 Hz)
- Supports half load (1350W) for 13.5 min. & full load (2700W) for 5 min.
- Add external battery packs for extra runtime
- “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement
- Full 2700W capacity available with & without external battery packs
- Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries Highly Customizable
- Customize communications & behavior to integrate with device makers’ specific needs
- Selectable auto-restart from 0 to 60 sec. after AC power is restored
- Selectable minimum battery charge level before auto-restart
- Schedule system reboot if USB (Universal Serial Bus) signal from connected device is lost
- Set overload thresholds & low battery levels for alert & shutdown
- Remote on/off (toggle) support via DB9
- ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict EPA efficiency guidelines
- Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide SNMP/ Web Capability
- Optional Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates & activity logs






































...

Tripp Lite Smart Pro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network & telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts & overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages & severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS & site-power data, plus enables a variety of UPS setup & configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions & operating costs. Network management interfaces support communications via USB (Universal Serial Bus), RS-232 & optional SNMPWEBCARD network interface. HID-compliant USB (Universal Serial Bus) port enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data & utility power conditions.

Includes:: Power Alert monitoring software & complete cabling. Switched output load banks enable scheduled & real-time remote reboot & load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel & silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- Tripp Lite SMART3000RM2U line interactive 2U rack/tower UPS with 3000VA / 3k VA capacity (1600W maximum load with external battery packs)
- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts & overvoltages from 83 to 145V
- NEMA L5-30P input plug; 8 NEMA 5-15/20R & 1 L5-30R output receptacles, Two independently switchable output load banks
- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts & overvoltages
- High 98% efficiency rating in line-power mode offers reduced power consumption & BTU emisssions
- Internal batteries offer 10 minutes at 50% load (1125W) & 3.5 minutes at 100% load (2250W)
- Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) & BP48V27-2US (multi-pack compatible) external battery packs (max output de-rates to 1600 watts with external batteries)
- External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
- Hot-swappable, user-replaceable internal batteries & external battery packs can be replaced with no disruption to connected equipment
- Front panel LCD monitoring screen with MODE & ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS & site power information
- LCD interface also supports a number of advanced user setup & operating preferences
- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
- Built-in USB (Universal Serial Bus), RS-232 & optional SNMPWEBCARD accessory monitoring options
- HID-compliant USB (Universal Serial Bus) port enables integration with built-in power management & auto shutdown features of Windows & Mac OS X
- Included Power Alert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
















...

Tripp Lite Smart Pro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network & telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts & overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages & severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS & site-power data, plus enables a variety of UPS setup & configuration options. ...

Tripp Lite's SMX1500LCDT Line-Interactive Tower UPS System offers voltage regulation, surge suppression & long-lasting battery support for personal computers, network workstations, home entertainment systems & media centers. Internal UPS circuits support entry-level PCs & other connected equipment during power failures, preventing data loss & downtime. Automatic Voltage Regulation (AVR) circuits continuously regulate brownouts & overvoltages from 170V to 280V back to usable levels, all while maintaining a full battery charge. Offers complete power protection in an attractive all-black cabinet design.

Includes:: 8 built-in outlets, 6 with full battery backup & surge suppression for vital system components & an additional set of 2 outlets with surge-suppression only for accessories not requiring battery support. Built-in USB (Universal Serial Bus) port & included cable enables optional unattended system shutdown without data loss in case of extended power failure. Power Alert software is available via free download from www.tripplite.com. HID-compliant USB (Universal Serial Bus) interface also enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Built-in surge dataline surge suppression jacks protect equipment with single-line dialup/DSL or network Ethernet connection. Built-in audible alarm & large LCD front panel display offers easy to read icon-based status indicators & detailed numeric data regarding input voltage, output voltage, frequency, load percentage, load watts, battery voltage & runtime in minutes. 1500VA/900W power-handling capacity supports entry-level PCs, home entertainment systems, network workstations & audio/video components. Features SMX1500LCDT line interactive UPS offers network-grade voltage regulation, surge suppression & long lasting battery support 8 built-in C13 outlets, 6 with UPS & surge suppression for vital components & 2 additional outlets with surge-only protection for devices not requiring battery support C14 AC inlet connection;

Includes:: one 6ft / 1.8m C13 to C14 line cord Maintains operation of connected equipment to prevent data loss, equipment damage & downtime associated with power failures & severe voltage fluctuations Line Interactive Automatic Voltage Regulation / AVR circuits continuously correct brownouts & overvoltages from 170 to 280V without using battery power Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges Offers 10 minutes runtime at 50% load (450 watts) Supports an entry level desktop system with LCD screen for up to 90 minutes during power failures (75 watts) LCD display continuously reports operating mode & battery charge level, plus additional UPS & site power data, such as input & output voltage, frequency, load percentage, load watts, battery voltage & estimated runtime in minutes USB (Universal Serial Bus) monitoring port enables optional unattended system shutdown using Power Alert UPS management software available via free download from www.tripplite.com HID-compliant USB (Universal Serial Bus) interface also enables automatic integration with built-in power management & auto shutdown features of Windows & Mac OSX Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX1500LCDT Line-Interactive Tower UPS System offers voltage regulation, surge suppression & long-lasting battery support for personal computers, network workstations, home entertainment systems & media centers. Internal UPS circuits support entry-level PCs & other connected equipment during power failures, preventing data loss & downtime. Automatic Voltage Regulation (AVR) circuits continuously regulate brownouts & overvoltages from 170V to 280V back to usable levels, all while maintaining a full battery charge. Offers complete power protection in an attractive all-black cabinet design.

Includes:: 8 built-in outlets, 6 with full battery backup & surge suppression for vital system components & an additional set of 2 outlets with surge-suppression only for accessories not requiring battery support. Built-in USB (Universal Serial Bus) port & included cable enables optional unattended system shutdown without data loss in case of extended power failure. Power Alert software is available via free download from www.tripplite.com. HID-compliant USB (Universal Serial Bus) interface also enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Built-in surge dataline surge suppression jacks protect equipment with single-line dialup/DSL or network Ethernet connection. Built-in audible alarm & large LCD front panel display offers easy to read icon-based status indicators & detailed numeric data regarding input voltage, output voltage, frequency, load percentage, load watts, battery voltage & runtime in minutes. 1500VA/900W power-handling capacity supports entry-level PCs, home entertainment systems, network workstations & audio/video components. Features SMX1500LCDT line interactive UPS offers network-grade voltage regulation, surge suppression & long lasting battery support 8 built-in C13 outlets, 6 with UPS & surge suppression for vital components & 2 additional outlets with surge-only protection for devices not requiring battery support C14 AC inlet connection;

Includes:: one 6ft / 1.8m C13 to C14 line cord Maintains operation of connected equipment to prevent data loss, equipment damage & downtime associated with power failures & severe voltage fluctuations Line Interactive Automatic Voltage Regulation / AVR circuits continuously correct brownouts & overvoltages from 170 to 280V without using battery power Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges Offers 10 minutes runtime at 50% load (450 watts) Supports an entry level desktop system with LCD screen for up to 90 minutes during power failures (75 watts) LCD display continuously reports operating mode & battery charge level, plus additional UPS & site power data, such as input & output voltage, frequency, load percentage, load watts, battery voltage & estimated runtime in minutes USB (Universal Serial Bus) monitoring port enables optional unattended system shutdown using Power Alert UPS management software available via free download from www.tripplite.com HID-compliant USB (Universal Serial Bus) interface also enables automatic integration with built-in power management & auto shutdown features of Windows & Mac OSX Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Built-in data line surge suppression offers protection for equipment with single-line dialup or network ethernet connection



...