Tripp Lite SU8000RT3UG 8000VA / 8k VA / 7200 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance & simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets & rugged industrial locations. ...

The SUINT1500LCD2U Smart Online 208/230V 1.5k VA 1.35k W On-Line Double-Conversion UPS provides battery backup & AC power protection against blackouts, brownouts, power surges & line noise that can damage electronics or destroy data. It continuously regulates AC output within 2% of the selected nominal output voltage with zero transfer time from online to battery mode. Featuring six C13 outlets (four switchable) & a C14 input, the SUINT1500LCD2U has an internal battery that provides 12.6 minutes of support at half load & 4.5 minutes at full load. Adding external battery packs, such as BP36V27-2US (sold separately), provides extended runtime. Managing the SUINT1500LCD2U is simplified through the interactive front-panel LCD interface, which displays operating conditions & diagnostic data, such as load & battery levels. You can set power strategies to reflect your protection priorities, whether it’s precise power quality for sensitive systems or the highest possible electrical efficiency. EMI/RFI noise filtering improves your equipment’s performance & prevents damage. A 936-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free downloadable POWERALERT software, the SUINT1500LCD2U enables safe unattended system shutdown & file saves in case of a prolonged power failure. ...

The SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS converts AC input to DC power, & then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online & battery modes. An interactive front-panel LCD interface provides detailed real-time UPS status & advanced setup & configuration options. In case of AC power outage, the internal batteries support 13.5 minutes of runtime at half load & five minutes at full load. Extended runtime is possible with optional external battery packs. “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement. An intelligent battery management system extends battery life. Managing the UPS is simplified through the interactive front-panel LCD interface, which displays operating conditions & diagnostic data, such as load & battery levels. You can set power strategies to reflect your protection priorities, whether it’s precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems. This UPS is ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict efficiency guidelines set by the U.S. Environmental Protection Agency. Power is filtered to protect connected equipment against surges & EMI/RFI line noise that can damage equipment or destroy data. Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide. Adding an optional network management card, such as Tripp Lite's SNMPWEBCARD network interface, permits remote management of the UPS, including reboots & activity logs.
- Zero transfer time suitable for advanced network applications
- 2% output voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- Features 2 C19 & 8 C13 outlets
- Meets strict ENERGY STAR efficiency guidelines
- SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS
- 4-post rack-mount installation kit
- USB (Universal Serial Bus) cable
- RS-232 cable
- C19-to-C20 power cable
- (2) C13-to-C14 power cables
- Owner’s manual
- Converts AC input to DC power, then DC to fully regulated sine wave AC output
- +/-2% voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- 3000VA/2700W capacity
- 2 C19 & 8 C13 outlets
- 570-joule surge suppression rating
- Supports tower installation with 2-9USTAND accessory
- Interactive Front-Panel LCD reports detailed status information, including load & battery levels
- Offers advanced configuration options, including output voltage & power strategies
- Auto Adaptive enables high efficiency & high-quality operation as necessary for ideal equipment protection
- Max Efficiency favors economy operation with high 95% efficiency
- Max Quality favors on-line, double-conversion mode, maintaining +/-2% output voltage regulation & zero transfer time
- Frequency Regulation & Frequency Conversion enable +/-0.05 Hz output regulation for selected frequency (50/60 Hz)
- Supports half load (1350W) for 13.5 min. & full load (2700W) for 5 min.
- Add external battery packs for extra runtime
- “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement
- Full 2700W capacity available with & without external battery packs
- Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries Highly Customizable
- Customize communications & behavior to integrate with device makers’ specific needs
- Selectable auto-restart from 0 to 60 sec. after AC power is restored
- Selectable minimum battery charge level before auto-restart
- Schedule system reboot if USB (Universal Serial Bus) signal from connected device is lost
- Set overload thresholds & low battery levels for alert & shutdown
- Remote on/off (toggle) support via DB9
- ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict EPA efficiency guidelines
- Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide SNMP/ Web Capability
- Optional Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates & activity logs






































...

Tripp Lite Smart Pro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network & telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts & overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages & severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS & site-power data, plus enables a variety of UPS setup & configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions & operating costs. Network management interfaces support communications via USB (Universal Serial Bus), RS-232 & optional SNMPWEBCARD network interface. HID-compliant USB (Universal Serial Bus) port enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data & utility power conditions.

Includes:: Power Alert monitoring software & complete cabling. Switched output load banks enable scheduled & real-time remote reboot & load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel & silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- Tripp Lite SMART3000RM2U line interactive 2U rack/tower UPS with 3000VA / 3k VA capacity (1600W maximum load with external battery packs)
- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts & overvoltages from 83 to 145V
- NEMA L5-30P input plug; 8 NEMA 5-15/20R & 1 L5-30R output receptacles, Two independently switchable output load banks
- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts & overvoltages
- High 98% efficiency rating in line-power mode offers reduced power consumption & BTU emisssions
- Internal batteries offer 10 minutes at 50% load (1125W) & 3.5 minutes at 100% load (2250W)
- Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) & BP48V27-2US (multi-pack compatible) external battery packs (max output de-rates to 1600 watts with external batteries)
- External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
- Hot-swappable, user-replaceable internal batteries & external battery packs can be replaced with no disruption to connected equipment
- Front panel LCD monitoring screen with MODE & ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS & site power information
- LCD interface also supports a number of advanced user setup & operating preferences
- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
- Built-in USB (Universal Serial Bus), RS-232 & optional SNMPWEBCARD accessory monitoring options
- HID-compliant USB (Universal Serial Bus) port enables integration with built-in power management & auto shutdown features of Windows & Mac OS X
- Included Power Alert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
















...

Tripp Lite Smart Pro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network & telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts & overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages & severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS & site-power data, plus enables a variety of UPS setup & configuration options. ...

Tripp Lite's SMX1500LCDT Line-Interactive Tower UPS System offers voltage regulation, surge suppression & long-lasting battery support for personal computers, network workstations, home entertainment systems & media centers. Internal UPS circuits support entry-level PCs & other connected equipment during power failures, preventing data loss & downtime. Automatic Voltage Regulation (AVR) circuits continuously regulate brownouts & overvoltages from 170V to 280V back to usable levels, all while maintaining a full battery charge. Offers complete power protection in an attractive all-black cabinet design.

Includes:: 8 built-in outlets, 6 with full battery backup & surge suppression for vital system components & an additional set of 2 outlets with surge-suppression only for accessories not requiring battery support. Built-in USB (Universal Serial Bus) port & included cable enables optional unattended system shutdown without data loss in case of extended power failure. Power Alert software is available via free download from www.tripplite.com. HID-compliant USB (Universal Serial Bus) interface also enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Built-in surge dataline surge suppression jacks protect equipment with single-line dialup/DSL or network Ethernet connection. Built-in audible alarm & large LCD front panel display offers easy to read icon-based status indicators & detailed numeric data regarding input voltage, output voltage, frequency, load percentage, load watts, battery voltage & runtime in minutes. 1500VA/900W power-handling capacity supports entry-level PCs, home entertainment systems, network workstations & audio/video components. Features SMX1500LCDT line interactive UPS offers network-grade voltage regulation, surge suppression & long lasting battery support 8 built-in C13 outlets, 6 with UPS & surge suppression for vital components & 2 additional outlets with surge-only protection for devices not requiring battery support C14 AC inlet connection;

Includes:: one 6ft / 1.8m C13 to C14 line cord Maintains operation of connected equipment to prevent data loss, equipment damage & downtime associated with power failures & severe voltage fluctuations Line Interactive Automatic Voltage Regulation / AVR circuits continuously correct brownouts & overvoltages from 170 to 280V without using battery power Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges Offers 10 minutes runtime at 50% load (450 watts) Supports an entry level desktop system with LCD screen for up to 90 minutes during power failures (75 watts) LCD display continuously reports operating mode & battery charge level, plus additional UPS & site power data, such as input & output voltage, frequency, load percentage, load watts, battery voltage & estimated runtime in minutes USB (Universal Serial Bus) monitoring port enables optional unattended system shutdown using Power Alert UPS management software available via free download from www.tripplite.com HID-compliant USB (Universal Serial Bus) interface also enables automatic integration with built-in power management & auto shutdown features of Windows & Mac OSX Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Built-in data line surge suppression offers protection for equipment with single-line dialup or network ethernet connection



...

Tripp Lite Smart Rack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet with Clear Acrylic Window, Hinged Back. Rack capacity: 18U, Type: Freestanding rack, Maximum weight capacity: 113 kg.

Size: 48.3 cm (19"),

Width: 600 mm,

Depth: 548.6 mm. Package

Width: 685.8 mm, Package

Depth: 609.6 mm, Package

Height: 1041.4 mm The SRW18USG Smart Rack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is ideal for storing EIA-standard 19-inch rack equipment in network closets & other areas with limited floor space where you need equipment to be secure, organized & out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 250 pounds. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering & reduce acoustic noise, but it also adds visual flair to your IT installation. The cabinet swings away from the wall on a sturdy hinge, allowing easy access to equipment & cabling during installation & maintenance. To ensure your valuable equipment stays secure, the doors & side panels lock. The top, bottom & removable side panels are vented, which allows air to flow freely through the rack to keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top & bottom ports allow easy cable routing through the cabinet. The SRW18USG comes fully assembled & ready to mount to the wall. Square & threaded mounting holes & numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to house equipment up to 20.5 inches deep, such as network switches & patch panels. Saves Valuable Workspace
- Perfect for network closets, retail locations, classrooms & other areas with limited floor space where you need equipment to be secure, organized & out of the way
- Houses EIA-standard 19 in. rack equipment in 18U of space
- Maximum load capacity of 250 lb. Hinged Cabinet for Convenient Access
- Swings away from the wall to allow easy access to equipment & cabling during installation & maintenance
- Rotate cabinet 180° before mounting to open reversible front door left or right Shatter-Resistant Clear Acrylic Front Window
- Lets you monitor equipment without unlocking the enclosure
- Prevents equipment tampering
- Reduces acoustic noise
- Provides extra visual flair Keeps Important Equipment Secure
- Side panels & front door lock securely
- Vented panels allow generous airflow that keeps equipment cool
- Convenient ports with removable covers allow cable routing through top & bottom Easy Enclosure & Equipment Installation
- Ships fully assembled for quick installation
- Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit
- Wall-mounting holes spaced 16 in. apart to accommodate standard wall stud placement
- Vertical mounting rails adjust in 7/8 in. increments to house equipment up to 20.5 in. deep
- Rails support square-hole or 12-24 threaded-hole mounting
- Rack spaces numbered for easy reference Meets Payment Card Industry Standards
- Provides physical equipment & media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance Package

Includes::
- SRW18USG Smart Rack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet
- (42) M6 screws
- (42) M6 cage nuts
- (42) M6 washers
- (42) 12-24 screws
- (2) Keys
- Owner’s manual







































...

Tripp Lite Smart Rack 23 in. Wide Mounting Rail Kit. Product

Colour: Black, Rack capacity: 42U, Compatibility:

...

The SRDRAWER2U Smart Rack 2U Locking Rack-Mount Storage Drawer is a convenient way to keep tools, cables, notes & essential accessories for your rack-mounted equipment at your fingertips. Constructed using cold-rolled steel with a durable black powder-coated finish, this rack-mount drawer has a maximum load capacity of 22 kgs. Recommended for quick storage in your data center, wiring closet, back office or anywhere else you keep rack equipment, the SRDRAWER2U mounts to your EIA-standard 19-inch 2-post or 4-post rack using the included hardware. It locks securely with the included keys to help prevent damage, tampering or theft. When not in use, the 2U drawer slides smoothly into the rack, out of the way until the next time you need a quick screwdriver or patch cable. Rack-Mount Drawer for Storing Essential Rack Equipment Accessories &9679; Keeps tools, cables, notes, computer discs, etc. at your fingertips &9679; Ideal for quick storage in data center, wiring closet & back office racks &9679; Maximum load capacity of 22 kgs. Heavy-Duty Steel Construction Designed for Long Life &9679; Made from durable cold-rolled steel with black powder-coated finish &9679; Slides smoothly out of the way into rack when not in use &9679; Locks securely with included keys to protect contents 2U Drawer Mounts in EIA-Standard 19 in. 2- or 4-Post Rack &9679; Mounting hardware included for quick installation &9679; 2U rack-mount drawer with maximum load capacity of 22 kgs &9679; Locks securely with included keys to protect contents &9679; Made from cold-rolled steel with black powder-coated finish &9679; Mounting hardware included for rack installation &9679; Slides smoothly out of the way into rack when not in use Package

Includes:: &9679; SRDRAWER2U Smart Rack 2U Locking Rack-Mount Storage Drawer &9679; (2) Keys &9679; Rack-mounting hardware &9679; Installation guide

...

Tripp Lite's 13U 4-Post Open Frame Rack helps IT managers organize their equipment array & provides fast, easy access to installed IT equipment. The SR4POST13 is a simple solution for housing IT equipment in secure environments & other areas that don’t require a lockable rack solution. This 13U rack features heavy-duty cold-rolled steel construction with a black powder-coated finish for durability. It supports stationary loads up to 1000 lb. The SR4POST13 comes with all the hardware required for assembly & has a self-squaring design with bolt-down provisions. For high-density applications, multiple units can be bolted together side by side. The open design of the SR4POST13 provides unobstructed airflow & easy access to equipment & cabling. It has numbered, square-hole mounting positions for easy installation of standard 19-inch rack equipment. The SR4POST13 supports equipment depths from 22 to 36 inches. This rack also accommodates toolless button-hole mounting for vertical PDUs & cable managers. Features Supports 1000lbs of rackmount equipment Adjustable mounting depth (22 to 36 inches) Textured powder coat finish Heavy-duty cold-rolled steel construction Numbered mounting positions Bolt down provisions Self squaring design Black finish Easy assembly ...