Tripp Lite Basic Power Distribution Units give IT Managers the ability to power multiple servers & vital networking hardware from a single input power source. Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical equipment in rack enclosures, network closets & more. Tooless mounting enables simple installation in button-mount compatible racks. Included mounting brackets support vertical installation in standard 2 & 4 post racks or other surfaces, such as under-counter or wallmount configurations. Plug retention brackets keep vital equipment plugged in & continuously powered. PDUV30HV 63.75 in. vertical 0U rack PDU supports 30A maximum capacity at 208/240V (agency derated to 24A).

Includes:: 10 ft. attached line cord with L6-30P input plug. 32 C13 & 6 C19 outlets support up to 38 directly connected pieces of networking equipment. Outlets are arranged in two separately breakered 15A load banks.

...

Tripp Lite single phase Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital display. Enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories. Features 3.84k W 16A single phase 200/220/230/240V Metered Power Distribution Unit / PDU Two-digit lighted meter reports combined total output current in amps 10ft / 3m input cable with Blue IEC309 16A input plug 0U 63.75in / 162cm vertical rackmount format installs vertically, using no rack spaces 38 total outlets (6 C19, 32 C13) Plug-lock cord retention sleeves keep C20 & C14 equipment plugs from accidental disconnection Toolless installation supported in button-mount compatible equipment racks Bolt-down installation brackets support installation in other racks & additional surfaces

...

The 70-inch (178-centimeter) PDUMV32HV 32A 230V 7.4k W Single-Phase Metered Power Distribution Unit features 48 outlets for distributing single-phase AC power to rack-mounted equipment, including computers, routers, switches & servers. Outlets are arranged in two separate load banks, each with 24 outlets (4 C19 & 20 C13), a dedicated 20A circuit breaker & a digital meter that reports the bank’s real-time output current in amps. The ammeters let you visually monitor each bank & maintain balanced loads to prevent circuit overloads & downtime due to breakers tripping. Special guards prevent the breakers from tripping accidentally. Outlets, breakers & ammeters are color-coded & labeled for easy identification. An ideal PDU for server rooms, network closets & data centers, the PDUMV32HV’s all-metal housing comes ready to mount vertically in your rack using the preinstalled 9 mm buttons or the included hardware. The IEC-309 32A blue input plug with 10-foot (3-meter) cord connects to your facility’s compatible AC power source, generator or protected UPS. Included C20 & C14 plug-lock inserts connect to your components’ plugs to ensure they remain connected & continuously powered. Use the included ground screw to connect any equipment that requires a chassis ground. ...

Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency & load levels via built-in network connection. Power Alert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories. Features 32A single phase 230V Monitored Power Distribution Unit / PDU Attached 3m / 10ft IEC-309 32A Blue (2P+E) input cable included 0U 178cm / 70in. vertical rackmount format 42 outlets (36 C13, 6 C19) in two separately breakered 20A output load banks Toolless installation supported in button-mount compatible equipment racks Bolt-down brackets support installation in other racks & additional surfaces Lighted display with select button reports output power consumption in amps in 3 segments (bank 1, bank 2 & total) Digital display also supports IP-address self-identification & 180 degree display rotation Built-in SNMP/ethernet interface reports voltage, frequency & PDU loading via network or secure web browser interface with options for user specified alarm & notification thresholds DHCP/ Manual configuration support 10/100 Mbps auto-sensing allows optimal communication with 10/100 Base-T networks Real-time clock backup maintains the time of day & date even if the PDU is unpowered Tiered access privileges allow an administrator & a guest to login via web browser for monitoring Alert notifications via email or SNMP traps offer immediate event notification Firmware upgrade ability supports future product enhancements. Supports HTTP, HTTPS, Power Alert Network Management System, SMTP, SNMPv 1, SNMPv 2, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols Fully compatible with FREE Power Alert Network Management System / NMS Software Included cord retention brackets keep vital network equipment plugged in & continuously powered

...

Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency & load levels via built-in network connection. Power Alert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories.

...

Featuring true on-line operation with pure sine wave output, zero transfer time to battery & complete UPS replacement capability with no downtime, the SU6000RT4UHVHW provides the highest level of protection available for mission-critical equipment from power outages, voltage fluctuations & transient surges. It converts incoming AC power to DC, & re-converts it back to filtered AC output with a pure sine wave, isolating connected components from all power problems in high-voltage environments. The SU6000RT4UHVHW has a 6k VA/5400W capacity & hardwire output. With its detachable PDU with bypass switch, the SU6000RT4UHVHW is easily hot-swappable by a user of any skill set—no need for lengthy & expensive service calls, & no downtime if a repair or battery replacement is needed. In bypass mode, the PDU passes power to equipment without the use of the power & battery modules, allowing them to be removed while keeping your application in operation. UPS battery backup keeps connected equipment operational through short power failures, & provides time to save data & perform an orderly system shutdown in case of a prolonged blackout. The SU6000RT4UHVHW’s runtime can be expanded with optional external battery packs. The SU6000RT4UHVHW features a highly efficient (96%) economy mode setting that can significantly reduce a facility's energy costs by minimizing heat output, reducing cooling requirements & consuming less electricity. An LCD display with LED indicators enables IT personnel to operating modes & conditions. The LCD/LED panel rotates for viewing in horizontal rack or vertical tower installations &

Includes:: an audible alarm that signals various conditions.

...

Tripp Lite SU8000RT3UHW 8000VA / 8k VA / 7200 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance & simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets & rugged industrial locations. ...

Tripp Lite SU8000RT3UG 8000VA / 8k VA / 7200 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance & simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets & rugged industrial locations. ...

The SUINT1500LCD2U Smart Online 208/230V 1.5k VA 1.35k W On-Line Double-Conversion UPS provides battery backup & AC power protection against blackouts, brownouts, power surges & line noise that can damage electronics or destroy data. It continuously regulates AC output within 2% of the selected nominal output voltage with zero transfer time from online to battery mode. Featuring six C13 outlets (four switchable) & a C14 input, the SUINT1500LCD2U has an internal battery that provides 12.6 minutes of support at half load & 4.5 minutes at full load. Adding external battery packs, such as BP36V27-2US (sold separately), provides extended runtime. Managing the SUINT1500LCD2U is simplified through the interactive front-panel LCD interface, which displays operating conditions & diagnostic data, such as load & battery levels. You can set power strategies to reflect your protection priorities, whether it’s precise power quality for sensitive systems or the highest possible electrical efficiency. EMI/RFI noise filtering improves your equipment’s performance & prevents damage. A 936-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free downloadable POWERALERT software, the SUINT1500LCD2U enables safe unattended system shutdown & file saves in case of a prolonged power failure. ...

The SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS converts AC input to DC power, & then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online & battery modes. An interactive front-panel LCD interface provides detailed real-time UPS status & advanced setup & configuration options. In case of AC power outage, the internal batteries support 13.5 minutes of runtime at half load & five minutes at full load. Extended runtime is possible with optional external battery packs. “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement. An intelligent battery management system extends battery life. Managing the UPS is simplified through the interactive front-panel LCD interface, which displays operating conditions & diagnostic data, such as load & battery levels. You can set power strategies to reflect your protection priorities, whether it’s precise power quality for sensitive systems or the highest possible electrical efficiency, all while ensuring 100% uptime for your systems. This UPS is ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict efficiency guidelines set by the U.S. Environmental Protection Agency. Power is filtered to protect connected equipment against surges & EMI/RFI line noise that can damage equipment or destroy data. Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide. Adding an optional network management card, such as Tripp Lite's SNMPWEBCARD network interface, permits remote management of the UPS, including reboots & activity logs.
- Zero transfer time suitable for advanced network applications
- 2% output voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- Features 2 C19 & 8 C13 outlets
- Meets strict ENERGY STAR efficiency guidelines
- SUINT3000LCD2U Smart Online 3000VA/2700W On-Line Double-Conversion UPS
- 4-post rack-mount installation kit
- USB (Universal Serial Bus) cable
- RS-232 cable
- C19-to-C20 power cable
- (2) C13-to-C14 power cables
- Owner’s manual
- Converts AC input to DC power, then DC to fully regulated sine wave AC output
- +/-2% voltage regulation in online & battery modes
- Selectable 200/208/220/230/240V output voltage
- 3000VA/2700W capacity
- 2 C19 & 8 C13 outlets
- 570-joule surge suppression rating
- Supports tower installation with 2-9USTAND accessory
- Interactive Front-Panel LCD reports detailed status information, including load & battery levels
- Offers advanced configuration options, including output voltage & power strategies
- Auto Adaptive enables high efficiency & high-quality operation as necessary for ideal equipment protection
- Max Efficiency favors economy operation with high 95% efficiency
- Max Quality favors on-line, double-conversion mode, maintaining +/-2% output voltage regulation & zero transfer time
- Frequency Regulation & Frequency Conversion enable +/-0.05 Hz output regulation for selected frequency (50/60 Hz)
- Supports half load (1350W) for 13.5 min. & full load (2700W) for 5 min.
- Add external battery packs for extra runtime
- “ Smart” battery packs, such as Tripp Lite’s BP72V18-2US, are automatically sensed & configured during replacement
- Full 2700W capacity available with & without external battery packs
- Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries Highly Customizable
- Customize communications & behavior to integrate with device makers’ specific needs
- Selectable auto-restart from 0 to 60 sec. after AC power is restored
- Selectable minimum battery charge level before auto-restart
- Schedule system reboot if USB (Universal Serial Bus) signal from connected device is lost
- Set overload thresholds & low battery levels for alert & shutdown
- Remote on/off (toggle) support via DB9
- ENERGY STAR qualified to save you money, save energy & protect the environment by meeting strict EPA efficiency guidelines
- Tested to international & North American CE, IEC62040-1: 2008, UL 1778, CSA, SASO & EAC standards for applications worldwide SNMP/ Web Capability
- Optional Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates & activity logs






































...