Tripp Lite SRFILTER. Product

Colour: White, Compatibility: 25U, 42U, 45U, 48U.

Width:



...

Tripp Lite RJ11 Straight Through Modular In-Line Coupler (F/F). Connector 1: RJ11, Connector 2: RJ11, Connector gender: Female/ Female. Product

Colour: White This coupler provides a simple & easy way to link together two cables with RJ11 plugs. The coupler is wired in a straight-through configuration. RJ11 female to RJ11 female.
- Inexpensively extend two telephone cords
- Gold-plated connectors provide superior conductivity
- RJ11 female to RJ11 female
- Straight-through configuration





...

Tripp Lite's 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring & control. Remotely displays status of input power, load capacity, & outlet power status via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers & other network devices. Load ramping & shedding provides programmable power management to any type of network configuration. Supports notification & logging of input power status, event notification, output power & load conditions. ...

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY & SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored & stable. Super-fast switchover between primary & secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS & fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite Smart Online series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators & even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Features 200-240V 16/20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous) Provides a redundant power option for critical networking equipment with a single input power cord 2 digit display reports output power consumption in amps 1U horizontal rackmount form factor; 14.8 in. / 37.6 cm depth 10 outlets (8 C13, 2 C19) Set of two C20 inlets support connection to separate PRIMARY & SECONDARY power sources Two 12ft / 3.6m C19 to C20 power cables included ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored & stable ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS & fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite Smart Online series) Advanced ATS configurations utilizing separate mains circuits, backup generators & even separate out of phase utility power grid feeds are fully supported On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source Super-fast switchover between primary & secondary power sources occurs in 2-5 milliseconds ...

PDUMH30HVNET Switched, Metered, 2U rack PDU supports 30A maximum capacity at 208/240V (agency de-rated to 24 amps).



...

Tripp Lite single phase Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital display. Enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories. Features 3.84k W 16A single phase 200/220/230/240V Metered Power Distribution Unit / PDU Two-digit lighted meter reports combined total output current in amps 10ft / 3m input cable with Blue IEC309 16A input plug 0U 63.75in / 162cm vertical rackmount format installs vertically, using no rack spaces 38 total outlets (6 C19, 32 C13) Plug-lock cord retention sleeves keep C20 & C14 equipment plugs from accidental disconnection Toolless installation supported in button-mount compatible equipment racks Bolt-down installation brackets support installation in other racks & additional surfaces

...

The 70-inch (178-centimeter) PDUMV32HV 32A 230V 7.4k W Single-Phase Metered Power Distribution Unit features 48 outlets for distributing single-phase AC power to rack-mounted equipment, including computers, routers, switches & servers. Outlets are arranged in two separate load banks, each with 24 outlets (4 C19 & 20 C13), a dedicated 20A circuit breaker & a digital meter that reports the bank’s real-time output current in amps. The ammeters let you visually monitor each bank & maintain balanced loads to prevent circuit overloads & downtime due to breakers tripping. Special guards prevent the breakers from tripping accidentally. Outlets, breakers & ammeters are color-coded & labeled for easy identification. An ideal PDU for server rooms, network closets & data centers, the PDUMV32HV’s all-metal housing comes ready to mount vertically in your rack using the preinstalled 9 mm buttons or the included hardware. The IEC-309 32A blue input plug with 10-foot (3-meter) cord connects to your facility’s compatible AC power source, generator or protected UPS. Included C20 & C14 plug-lock inserts connect to your components’ plugs to ensure they remain connected & continuously powered. Use the included ground screw to connect any equipment that requires a chassis ground. ...

Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency & load levels via built-in network connection. Power Alert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories. Features 32A single phase 230V Monitored Power Distribution Unit / PDU Attached 3m / 10ft IEC-309 32A Blue (2P+E) input cable included 0U 178cm / 70in. vertical rackmount format 42 outlets (36 C13, 6 C19) in two separately breakered 20A output load banks Toolless installation supported in button-mount compatible equipment racks Bolt-down brackets support installation in other racks & additional surfaces Lighted display with select button reports output power consumption in amps in 3 segments (bank 1, bank 2 & total) Digital display also supports IP-address self-identification & 180 degree display rotation Built-in SNMP/ethernet interface reports voltage, frequency & PDU loading via network or secure web browser interface with options for user specified alarm & notification thresholds DHCP/ Manual configuration support 10/100 Mbps auto-sensing allows optimal communication with 10/100 Base-T networks Real-time clock backup maintains the time of day & date even if the PDU is unpowered Tiered access privileges allow an administrator & a guest to login via web browser for monitoring Alert notifications via email or SNMP traps offer immediate event notification Firmware upgrade ability supports future product enhancements. Supports HTTP, HTTPS, Power Alert Network Management System, SMTP, SNMPv 1, SNMPv 2, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols Fully compatible with FREE Power Alert Network Management System / NMS Software Included cord retention brackets keep vital network equipment plugged in & continuously powered

...

Tripp Lite single phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency & load levels via built-in network connection. Power Alert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU lighted digital display enables visual monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories.

...

Tripp Lite's Smart Rack SRCABLERINGVRT helps eliminate cable stress by organizing the cables within the Smart Rack enclosure or open rack cabinet. The vertical cable manager (flexible ring type) is 6-ft high & split into two 3-ft sections to allow for multiple installation options. SRCABLERINGVRT offers toolless button mounting. ...