Hand operated winches ideal for moving & pulling loads & have many uses in DIY leisure & light commercial applications. These winches offer two working loads of 450 kg. or 900 kg. & are perfect for general recovery & loading work such as Cars Boats Lawn Equipment & pulling loads onto trailers or up steep drive-ways. The winches feature hardened steel gears with a smooth action single speed ratcheting crank locking mechanism supported on a heavy plate chassis coated for corrosion resistance. Fitted with a drop forged steel hook with safety pawl & a long 24 cm. handle for easy operation. Note: Do not exceed 180% grade when puling any Weight: load. This product is not designed for lifting. FAIAUWIN900 specifications: Maximum load: 900 kg. Cable length: 10 m. x 5.1. Maximum traction capacity: 2000da N. ...

Ideal for housing cuts where oversize or undersize board is used. Allows wider grooves to be routed by simply rotating the base. Made from clear plastic. Pre-drilled for Trend, Elu & De Walt routers. Can be re-drilled by user to suit other makes of router. The distance from the centre hole to the shortest edge is 100 mm., subsequent edge distances are 101 mm., 102 mm., 103 mm., 104 mm. & 105 mm. Size=200 x 200 x 8 mm. with 1.0 mm. offset. ...

A seven piece template set that allows elliptical picture frames & plaques/plints to be routed. Made from clear 8 mm. thick laser cut plastic. The four picture frame templates & three plaque templates are supplied with pinholes so that they can be secured to the component, or alternatively they can be secured with hot melt glue or double sided sticky tape. Use with a bearing guided 12.7 mm. Diameter: template profiler or laminate trimming router cutter, in a router table or portable use. Back of frame requires 12.7 mm. guided rebate cutter. Frame Sizes= 7 x 9. Plaque Sizes= 3 x 2. Frame Sizes= 5 x 7. Plaque Sizes= 5 x 3 1/2. Frame Sizes= 3 1/2 x 5. Plaque Sizes= 5 29/32 x 4 3/8. Frame Sizes= 6 29/32 x 8 29/32. These two templates are used to create the backs of the three picture frames 7 x 9, 5 x 7 & 3 1/2 x 5. ...

Clear plastic template for use with any plunge router to accurately fit three sizes of letter box plates. Made from 8mm thick clear plastic. Use on wooden doors up to 50mm thick. Use with 1/2inch collet plunge router. Requires 12mm cutter & 30mm guide bush. A Unibase may be required for certain makes & models of router. Router not included. Template size=326mm x 290mm x 8mm Letterbox plate sizes 220mm x 50mm 210mm x 60mm 200mm x 60mm ...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. Kitchen fitters pack containing 5 x TR17 X 1/2 TC Cutters. 12.7 mm. x 50 mm.

...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR17D have a center tip for drilling abrasive materials & are designed to work with the Trend Worktop jigs. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12.7 mm. Cutting Length (C): 50.0 mm.

...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR18D have a centre tip for drilling abrasive materials. Dimensions: Shank: 1/2 in Cutting Diameter (D): 12.7 mm. (1/2 in) Cutting Length (C): 63 mm.

...

Enables biscuit jointing with timber man-made fibre & particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0 10, 20. Dimensions: Shank: 1/2 in Cutting Diameter (D): 37.2 mm. Cutting Length (C): 4.0 mm. ...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. The TR37 is suitable for use with Trend Lock Jigs. Dimensions: Shank: 1/2 in Cutting Diameter: 12 mm. Cutting Length: 63 mm.

...

For fast & accurate joining of timber & plywood giving strong instant joints. Solid hardened bushes with variable pitch of 29 mm. to 63 mm. Use on timber MDF plywood & blockboard. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Workpiece can be handled immediately after gluing & screwing creating time saving benefits. No clamps required. Specifications

Material: thickness min: 16 mm.

Material: thickness max: 38 mm.

Material: width min: 38 mm. Hole pitch: 29 mm-63 mm. Drill diameter: 9.5 mm. Square drive bit

Size: No. 2 Screw

Sizes: No. 7 x 30 mm. Supplied with: 100 x Dome head screws, 1 x Face clamp, 1 x HSS drill bit with collar, 1 x 75 mm. Square drive bit 1 x 150 mm. Square drive bit.









...