About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Trend 3d Bit Kit 4pc Kit 15 Mm. 18 Mm. 20 Mm. 22mm
Trend 3d Bit Kit 4pc
Kit 15 Mm. 18 Mm. 20
Mm. 22mm
£39.50
The effective tool for electricians plumbers carpenter & locksmiths. Ideal for installation & renovation work. Makes holes in wood & other soft materials twice as fast as any other drill. Has sharp cutting edges in three directions. Ideal for cutting straight or curved channels recesses for cables & pipework & creating a mortise for locks. Faster drilling. Cleaner holes. Can be resharpened. Drilling Rotation Speed 300-1500/min Milling Rotation Speed 1000-2500/min 1 x 15 mm. 3D bit 1 x 18 mm. 3D bit 1 x 20 mm. 3D bit 1 x 22 mm. 3D bit. ...
Archived Product
Trend 3d Bit Kit 8pc Kit 7 Mm. - 25mm
Trend 3d Bit Kit 8pc
Kit 7 Mm. - 25mm
£82.49
The effective tool for electricians plumbers carpenter & locksmiths. Ideal for installation & renovation work. Makes holes in wood & other soft materials twice as fast as any other drill. Has sharp cutting edges in three directions. Ideal for cutting straight or curved channels recesses for cables & pipework & creating a mortise for locks. Faster drilling. Cleaner holes. Can be resharpened. Drilling Rotation Speed 300-1500/min Milling Rotation Speed 1000-2500/min 1 x 7 mm. 3D bit 1 x 10 mm. 3D bit 1 x 12 mm. 3D bit 1 x 15 mm. 3D bit 1 x 18 mm. 3D bit 1 x 20 mm. 3D bit 1 x 22 mm. 3D bit 1 x 25 mm. 3D bit. ...
Archived Product
image missing
Trend 3d/kit/4 3d Bit
Four Piece Kit
£38.99
The effective tool for electricians plumbers carpenters & locksmiths. Ideal for installation & renovation work. Makes holes in wood & other soft materials twice as fast as any other drill. Has sharp cutting edges in three directions. Ideal for cutting straight or curved channels recesses for cables & pipework & creating a mortise for locks. Faster drilling. Cleaner holes. Can be resharpened. Specifications: Drilling rotation speed: 300-1500 rpm. Milling rotation speed: 1000-2500 rpm.
Includes:: 1 x 5/8 inch. 3D bit 1 x 3/4 inch 3D bit 1 x 7/8 inch. 3D bit & 1 x 1 inch 3D bit.
...
Archived Product
Trend 4/24 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/24 X 1/2
Tungsten Carbide Two
Flute Cutter
£38.00
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. C = 63 mm. D = 15.9 mm. 5/8 in. ...
Archived Product
image missing
Trend 4/29 X 1/2
Tungsten Carbide Two
Flute Cutter
£27.50
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. T.C.T. Tooling 1/2 in Shank. C = 25 = 18 mm. 45/64 in. ...
Archived Product
Trend 4/6 X 1/4 Tungsten Carbide Two Flute Cutter
Trend 4/6 X 1/4
Tungsten Carbide Two
Flute Cutter
£35.19
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. Two flutes give a clean finish to cut edges. 1/4 in. Shank. C = 25 mm. D = 20 mm. 25/32 in. ...
Archived Product
image missing
Trend 4/8 X 1/2
Tungsten Carbide Two
Flute Cutter
£31.49
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. C = 25 mm. D = 25.4 mm. 1 in. ...
Archived Product
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/80 X 1/2
Tungsten Carbide Two
Flute Cutter
£38.00
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. C = 37 mm. D = 25.4 mm. 1 in OL = 66 mm. ...
Archived Product
Trend 421/35 X 1/4 Tungsten Carbide Machine Bit
Trend 421/35 X 1/4
Tungsten Carbide
Machine Bit
£36.50
Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. T.CT. 1/4 in. Shank. Diameter: 3.5cm. ...
Archived Product
image missing
Trend 46/09 X 1/2
Tungsten Carbide
Template Profiler
£42.50
Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 19.1 mm. C = 50 mm. ...
Archived Product

Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving rebating mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood and certain hardwoods. T.C.T. Tooling 1/2 in Shank. C = 50 mm. D = 18 mm. 45/64 inOL = 92 mm.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 467430
Availability: In Stock
£37.00
computers DEFAULT
Description Reviews / Comments Add New

Product Description

Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. C = 50 mm. D = 18 mm. 45/64 in OL = 92 mm.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£23.99
Archived Product
Trend S3/22 X 1/4 Tungsten Carbide Two Flute Cutter
Trend S3/22 X 1/4 Tungsten Carbide Two Flute Cutter Ebuyer
£29.50
Archived Product
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm Ebuyer
£11.00
Archived Product
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£23.00
Archived Product
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£38.50
Archived Product
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£56.99
Archived Product
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter Ebuyer
£23.00
Archived Product
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£37.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Flute - A long silver instrument with buttons to press to make different notes.
Chipboard - A piece of wood like material that us used to pin paper and notes too.
MDF - A shortened term for Medium Density Fibreboard

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu