About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend 11/3 X 1/4
Tungsten Carbide V
Groove Cutter
£20.99
Chamfer V grooving cutters are used for bevelling chamfering & producing motar grooves. Due to design an approx. 1.0 mm. flat will be found on the nose. Typical trade applications include sign making freehand engraving cabinet making & decorative joinery. Tooling: T.C.T. 1/4 in. Shank. A = 45 D = 19.1 mm. C1 = 9.2 mm. C2 = 13 mm. ...
Archived Product
image missing
Trend 11/50 X 1/4
Panel Mould Cutter
Tungsten Carbide
£29.99
These cutters are primarily designed to produce panel moulds on cabinet doors & drawer fronts in the furniture industry. They may also be used for edge moulding ovolo cove & ogee profiles. Tooling: T.C.T.1/4 in. Shank. R
- 4 mm. D
- 13 mm. D
- 1.2 mm. C
- 12 mm.



...
Archived Product
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/3 X 1/4
Tungsten Carbide
Radius Cutter
£23.00
These cutters are used extensively for routing edge moulds face grooves columns fluting water slots engraving & panel moulds in products such as desk tops fire surrounds draining boards & picture frames. These cutters are suitable for use on all natural timbers & man-made boards. Tooling: T.C.T.1/4 in. Shank. R = 3 mm. D = 6 mm. C = 15 mm. ...
Archived Product
Trend 12/5 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/5 X 1/4
Tungsten Carbide
Radius Cutter
£23.99
These cutters are used extensively for routing edge moulds face grooves columns fluting water slots engraving & panel moulds in products such as desk tops fire surrounds draining boards & picture frames. These cutters are suitable for use on all natural timbers & man-made boards. Tooling: T.C.T.1/4 in. Shank. R = 5 mm. D = 10 mm. C = 18 mm. ...
Archived Product
Trend 12/6 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/6 X 1/4
Tungsten Carbide
Radius Cutter
£31.49
These cutters are used extensively for routing edge moulds face grooves columns fluting water slots engraving & panel moulds in products such as desk tops fire surrounds draining boards & picture frames. These cutters are suitable for use on all natural timbers & man-made boards. Tooling: T.C.T.1/4 in. Shank. R = 6.3 = 12.7 mm. C = 19 mm. ...
Archived Product
Trend 13/30 X 1/2 Tungsten Carbide Radius Cutter
Trend 13/30 X 1/2
Tungsten Carbide
Radius Cutter
£41.00
These cutters are used extensively for routing edge moulds face grooves columns fluting water slots engraving & panel moulds in products such as desk tops fire surrounds draining boards & picture frames. These cutters are suitable for use on all natural timbers & man-made boards. TC. 1/2 in Shank R = 12.7 mm. D = 25.4 mm. C = 15.9 mm. ...
Archived Product
image missing
Trend 18/53 X 1/4
Tungsten Carbide
Classic Style Cutter
£38.00
These cutters are used extensively in the furniture & cabinet making trades to cut edge & face mouldings in natural timbers & man-made boards. Bearing guided versions can be run along the work piece edge or template particularly useful when curved work is undertaken. Applications include drawer fronts ledges table tops door shelves architraves false panels & cornices. Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5 mm. thicker than the cut length of the cutter. Tooling
- T.C.T. 1/2 in Shank. R
- 3.5 mm. D
- 22 mm. C
- 10 mm. B
- 22 mm.




...
Archived Product
Trend 18/80 X 1/2 Tungsten Carbide Panelling Bevel
Trend 18/80 X 1/2
Tungsten Carbide
Panelling Bevel
£86.50
Used when machining traditional panels & frame doors. Work formerly done on spindle moulders can now be performed with heavy-duty routers mounted in fixed positions either overhead or inverted. These raised panel cutters run best at lower speeds between 12000 & 18000 rpm & match the Trens range of profile scribers. All are suitable for use on natural timbers & MDF.T.C.T. 1/2 in Shank. D
- 86 mm. C
- 12.7 mm. B
- 12.7 mm. A
- 15.



...
Archived Product
Trend 2 10 Router Cutter 1 4 Tc
Trend 2 10 Router
Cutter 1 4 Tc
£17.50
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2. 0mm diameter & below should have a maximum of 1. 0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. ...
Archived Product
Trend 2/01 X 1/4 Tungsten Carbide One Flute Cutter
Trend 2/01 X 1/4
Tungsten Carbide One
Flute Cutter
£16.49
These cutters are suitable for grooving rebating mortising & drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of cut on cutters of 2.0 mm. diameter & below should be a maximum of 1.0 mm. per pass. Small diameters in Tungsten Carbide must be handled with care to avoid breakage & very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. Single flute cutters must not be used in eccentric chucks. Shank. 1/4 in. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 1.5 mm. Cutting Length (C): 6.0 mm. ...
Archived Product

Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter

These cutters are used extensively for routing edge moulds face grooves columns fluting water slots engraving and panel moulds in products such as desk tops fire surrounds draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards. Tooling: T.C.T.1/4 in. Shank. R = 10 mm. D = 20 mm. C = 18 mm.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 467464
Availability: In Stock
£38.50
computers DEFAULT
Description Reviews / Comments Add New

Product Description

These cutters are used extensively for routing edge moulds face grooves columns fluting water slots engraving & panel moulds in products such as desk tops fire surrounds draining boards & picture frames. These cutters are suitable for use on all natural timbers & man-made boards. Tooling: T.C.T.1/4 in. Shank. R = 10 mm. D = 20 mm. C = 18 mm.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£23.00
Archived Product
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter Ebuyer
£23.00
Archived Product
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£56.99
Archived Product
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£23.99
Archived Product
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£37.00
Archived Product
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£37.00
Archived Product
Trend 46/39 X 1/4 Tungsten Carbide Rebate Set
Trend 46/39 X 1/4 Tungsten Carbide Rebate Set Ebuyer
£44.99
Archived Product
Trend 46/130 X 1/4 Tungsten Carbide Rounding Over Ovolo Cutter
Trend 46/130 X 1/4 Tungsten Carbide Rounding Over Ovolo Cutter Ebuyer
£34.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

water - A chemical substance. Chemical formula H2O.
Desk - A piece of furniture often used in and office for writing or computer use
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Natural - not manmade
Fire - the release of energy through heat and light.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu