More From Contributor

Ideal for housing cuts where oversize or undersize board is used. Allows wider grooves to be routed by simply rotating the base. Made from clear plastic. Pre-drilled for Trend, Elu & De Walt routers. Can be re-drilled by user to suit other makes of router. The distance from the centre hole to the shortest edge is 100 mm., subsequent edge distances are 101 mm., 102 mm., 103 mm., 104 mm. & 105 mm. Size=200 x 200 x 8 mm. with 1.0 mm. offset. ...

Archived Product

A seven piece template set that allows elliptical picture frames & plaques/plints to be routed. Made from clear 8 mm. thick laser cut plastic. The four picture frame templates & three plaque templates are supplied with pinholes so that they can be secured to the component, or alternatively they can be secured with hot melt glue or double sided sticky tape. Use with a bearing guided 12.7 mm. Diameter: template profiler or laminate trimming router cutter, in a router table or portable use. Back of frame requires 12.7 mm. guided rebate cutter. Frame Sizes= 7 x 9. Plaque Sizes= 3 x 2. Frame Sizes= 5 x 7. Plaque Sizes= 5 x 3 1/2. Frame Sizes= 3 1/2 x 5. Plaque Sizes= 5 29/32 x 4 3/8. Frame Sizes= 6 29/32 x 8 29/32. These two templates are used to create the backs of the three picture frames 7 x 9, 5 x 7 & 3 1/2 x 5. ...

Archived Product

Clear plastic template for use with any plunge router to accurately fit three sizes of letter box plates. Made from 8mm thick clear plastic. Use on wooden doors up to 50mm thick. Use with 1/2inch collet plunge router. Requires 12mm cutter & 30mm guide bush. A Unibase may be required for certain makes & models of router. Router not included. Template size=326mm x 290mm x 8mm Letterbox plate sizes 220mm x 50mm 210mm x 60mm 200mm x 60mm ...

Archived Product

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. Kitchen fitters pack containing 5 x TR17 X 1/2 TC Cutters. 12.7 mm. x 50 mm.

...

Archived Product

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR12 features a solid carbide insert & centre tip for drilling. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12 mm. Cutting Length (C): 19 mm.

...

Archived Product

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR18D have a centre tip for drilling abrasive materials. Dimensions: Shank: 1/2 in Cutting Diameter (D): 12.7 mm. (1/2 in) Cutting Length (C): 63 mm.

...

Archived Product

Enables biscuit jointing with timber man-made fibre & particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0 10, 20. Dimensions: Shank: 1/2 in Cutting Diameter (D): 37.2 mm. Cutting Length (C): 4.0 mm. ...

Archived Product

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. The TR37 is suitable for use with Trend Lock Jigs. Dimensions: Shank: 1/2 in Cutting Diameter: 12 mm. Cutting Length: 63 mm.

...

Archived Product

For fast & accurate joining of timber & plywood giving strong instant joints. Solid hardened bushes with variable pitch of 29 mm. to 63 mm. Use on timber MDF plywood & blockboard. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Workpiece can be handled immediately after gluing & screwing creating time saving benefits. No clamps required. Specifications

Material: thickness min: 16 mm.

Material: thickness max: 38 mm.

Material: width min: 38 mm. Hole pitch: 29 mm-63 mm. Drill diameter: 9.5 mm. Square drive bit

Size: No. 2 Screw

Sizes: No. 7 x 30 mm. Supplied with: 100 x Dome head screws, 1 x Face clamp, 1 x HSS drill bit with collar, 1 x 75 mm. Square drive bit 1 x 150 mm. Square drive bit.

...

Archived Product

Fast -Identifies & blocks new & emerging threats before they impact your business. -Protects without affecting your performance or speed. -Virus scans run in the background so your computers are unaffected. Effective -Stops viruses, spyware, & other web threats before they can reach your business. -Data loss prevention stops private business information from being shared via USB (Universal Serial Bus) drives & other attached storage devices as well as in email messages. -URL filtering keeps employees from inappropriate & infected websites. Simple -Specifically designed for businesses with limited IT staff. -Easy to install & use, no IT expertise required. -Security status at-a-glance & easy-to-read security reports. ...

Available

Trend Tr17dx1/2tc Two Flute Cutter 12.7 Mm. Diameter

Trend Trade range two flute router cutters have extra long Shank s and are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard MDF plywood and certain hardwoods. The dimensions are etched on the extra long 40 mm. Shank s for quick identification and are suitable for mortice and worktops applications. TR17D have a center tip for drilling abrasive materials and are designed to work with the Trend Worktop jigs. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12.7 mm. Cutting Length (C): 50.0 mm.

Availability: Out Of Stock
Supplier: Ebuyer
SKU: 467557

Description Reviews / Comments Add New

Product Description

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR17D have a center tip for drilling abrasive materials & are designed to work with the Trend Worktop jigs. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12.7 mm. Cutting Length (C): 50.0 mm.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product

Trend Tr18dx1/2tc Two Flute Cutter 12.7 Mm. Diameter Ebuyer

£25.00

Jargon Buster

Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.

Diameter - A measurement across a circle passing through the middle

professional - A term used to describe products or people which may be focused on specialist educational training

cutting - The seperation of an object usually using a cutting tool such as a knife

Quick - Something that is fast

Professional - A person that is trained within a profession.

Dimensions - The shapes and angles of something or a situation.

Flute - A long silver instrument with buttons to press to make different notes.

Chipboard - A piece of wood like material that us used to pin paper and notes too.

MDF - A shortened term for Medium Density Fibreboard

Supplier Information

Ebuyer

Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.

More From Contributor

Trend Tr17dx1/2tc Two Flute Cutter 12.7 Mm. Diameter

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account