Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR17D have a center tip for drilling abrasive materials & are designed to work with the Trend Worktop jigs. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12.7 mm. Cutting Length (C): 50.0 mm.

...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR18D have a centre tip for drilling abrasive materials. Dimensions: Shank: 1/2 in Cutting Diameter (D): 12.7 mm. (1/2 in) Cutting Length (C): 63 mm.

...

Enables biscuit jointing with timber man-made fibre & particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0 10, 20. Dimensions: Shank: 1/2 in Cutting Diameter (D): 37.2 mm. Cutting Length (C): 4.0 mm. ...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. The TR37 is suitable for use with Trend Lock Jigs. Dimensions: Shank: 1/2 in Cutting Diameter: 12 mm. Cutting Length: 63 mm.

...

For fast & accurate joining of timber & plywood giving strong instant joints. Solid hardened bushes with variable pitch of 29 mm. to 63 mm. Use on timber MDF plywood & blockboard. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Workpiece can be handled immediately after gluing & screwing creating time saving benefits. No clamps required. Specifications

Material: thickness min: 16 mm.

Material: thickness max: 38 mm.

Material: width min: 38 mm. Hole pitch: 29 mm-63 mm. Drill diameter: 9.5 mm. Square drive bit

Size: No. 2 Screw

Sizes: No. 7 x 30 mm. Supplied with: 100 x Dome head screws, 1 x Face clamp, 1 x HSS drill bit with collar, 1 x 75 mm. Square drive bit 1 x 150 mm. Square drive bit.









...

Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. ...

The 16-Port Gigabit GREENnet Switch, model TEG-S16g, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. Features 16 x 10/100/1000 Mbps Auto-MDIX Gigabit Ethernet ports On / off power switch Features a 32 Gbps forwarding capacity Internal power supply reduces clutter GREENnet technology reduces electrical power consumption when: Ethernet port is not in use Connected device is turned off Connected device is in power-saving mode Based on Ethernet cable length IEEE 802.3x Flow Control for full-duplex mode Back pressure Flow Control for half-duplex mode Store-&-Forward switching architecture with non-blocking wire-speed performance Integrated address look-up engine with an 8K MAC address table 2 M Bits RAM data buffer Operates & maximizes packet filtering & forwarding rate Jumbo Frame support up to 9216 Bytes Rackmount hardware included Sturdy metal housing Diagnostic LEDs & Plug & Play support 3-year limited warranty * Max power savings compared with standard TRENDnet switches ...

The 1-Port KVM Switch over IP (TK-IP101) provides cost effective remote server management for multiple users, regardless of server status. Eliminate the need to physically be in the server room to troubleshoot, reboot & edit pre-boot functions. Save resources & manage server & PC resources from around corner or around the world. Provides access to both Windows & Java-based clients. With up to 16 active user accounts the TK-IP101 supports 4 concurrent logins. An intuitive Web user interface provides controls from BIOS level functions to Windows based applications. Use the TK-IP101 with the TRENDnet’s 8-Outlet Remote Power Controller (TK-RP08) to facilitate remote power cycling & rebooting. Manage KVM switches & servers remotely over the Internet Centralize management of multiple servers when connected to a conventional KVM switch Save time & resources by managing resources remotely Multiple user access control Management of remote servers from BIOS level up to GUI level applications Full 1024-bit PKI authentication & 256-bit SSL encryption Enjoy crisp 1600x 1200 resolution Intuitive Web user interface permits upgrades & backups Supports user friendly Telnet sessions & FTP access Use with TRENDnet’s TK-RP08 to control on/off power cycling of multiple devices remotely Works with LDAP, RADIUS & Active Directory Servers Ethernet RJ-45 & Serial PPP connections supported PPP connection over serial RS-232 interface with data rates up to 1 Mbps Works with Windows & Java-based clients for cross-platform compatibility Low bandwidth Internet connections supported with JPEG compression ...

Ensure zero downtime with this hot swappable 100 ~ 240 VAC redundant power supply. Built-in over voltage & short circuit protection protects networking hardware. Use this device with the TFC-1600 chassis as a power supply backup. ...

The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP & spans distances up to 20km (12.4miles). Ports include 1 x 1000 Base-T (RJ-45) port & 1 x 1000 Base-LX (SC-Type) port. Features SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles) 1000 Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis Compliant with IEEE 802.3ab 1000 Base-T & IEEE 802.3z 1000 Base-LX standards 1 x 1000 Base-T RJ-45 port 1 x 1000 Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/ Auto-Negotiation), LLR (Enable/ Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor & configure Ethernet or Fiber’s duplex mode, LLR, port on/off & receive link down information via management module TFC-1600MM & chassis TFC-1600 Status LED indicators for Power & Link/ Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty ...