Define S Window The Fractal Design Define S lends the appearance, sound dampening technology, & support for a wide variety of components from the widely popular Define Series, while introducing a new, innovative internal layout. The Define S case is packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful & expansive air & liquid cooling support, presented in a stunning Scandinavian inspired construction. The modernized internal layout of the Define S omits the optical drive bays, instead focusing on a clear straight airflow path & uncompromising water cooling support. The Define S case reaches the highest level of silent computing through strategically placed dense sound-absorbing material, multiple Modu Vent™ fan vent covers & finely tuned Dynamic Series fans. Key Features Optimally designed for silent computing, while not compromising on airflow & cooling capabilities Innovative internal layout, providing a perfectly straight airflow path to the CPU heatsink for air cooling set ups or extensive radiator mounting possibilities for water cooling set ups Extensive water cooling support for a case of this size; housing radiators up to 420mm in the top & 360mm in the front Including smart reservoir brackets; featuring drill-free reservoir mounting on the front of the motherboard tray & pre-drilled pump mounting holes on the bottom panel Equipped with Modu Vent™ fan slot covers providing the option of additional cooling or maximum sound absorption Including two Fractal Design Dynamic GP14 140mm fans developed for superlative airflow while still maintaining low noise levels Maintaining a dust-free interior with dust filters that cover the front & bottom air intakes Introducing newly designed hard drive trays placed vertically behind the front partition of the motherboard tray; Three sturdy steel trays with vibration-dampening grommets allowing for installation of one 3.5" or 2.5" drive on each tray, without disrupting the airflow or interfering with the radiator mounting possibilities An additional 2 dedicated steel SSD trays cleanly placed behind the motherboard tray Long motherboard tray extending to the front panel contributing to an extremely clean build, hiding both hard drives & cables Define S model is also available with a large window on the side panel Specifications ATX, Micro ATX, Mini ITX motherboard compatibility 7 expansion slots 3
- 3.5" HDD positions (can also accommodate 2.5" units); 2
- 2.5" dedicated SSD/HDD unit positions 9
- Fan positions (2 Fractal Design Dynamic GP14 140mm fans included); 8 fan positions on window model Filtered fan slots in the front & bottom CPU coolers up to 180mm in height ATX PSUs up to 180/170 mm with a bottom 120/140mm fan installed; When not using any bottom fan location longer PSUs up to 300mm can be used Graphics cards up to 425 mm in length with front fans installed, without compromising HDD capacity; Graphics cards up to 450mm in length without front fans installed directly in line with the GPU With a front radiator, maximum graphics card length is reduced by the radiator thickness 20
- 40 mm of space for cable routing behind the motherboard plate Velcro straps included for easy cable management Both side panels feature smart captive thumbscrews so no thumbscrews are lost Colours available: Black Case

Dimensions (Wx Hx D): 233 x 451 x 520mm Case

Dimensions
- with feet/screws/protrusions: 233 x 465 x 533mm Net weight
- window version: 8.5kg Package

Dimensions (Wx Hx D): 322 x 615 x 535mm Package weight
- window version: 10.2kg Cooling System Front: 3 – 120/140 mm fans (included is 1 Fractal Design Dynamic GP14 fan, 1000 RPM speed) Rear: 1 – 120/140 mm fan (included is 1 Fractal Design Dynamic GP14 fan, 1000 RPM speed) Top: 3
- 120/140 mm fan (not included) or 1
- 180 mm fan with 165mm hole spacing (not included) Bottom: 1 – 120/140 mm fan (not included) Dust filters: Bottom & front intakes Water cooling compatibility
- Radiators Front – 360, 280, 240, 140 & 120 mm radiators of all thicknesses Top – 420, 360, 280, 240, 140 & 120 mm radiators. (A thickness limitation of 55mm for both radiator + fan applies on 420, 280 & 140 mm radiators) Bottom – 120 mm radiator (Use of radiators in the bottom position limits the PSU length to 165 mm) Rear – 120 or 140 mm radiator Water cooling compatibility
- Pumps Pre-drilled holes on the bottom panel, supports many DDC & D5 variants Water cooling compatibility
- Reservoirs Adjustable mounting brackets allow for almost any rectangular mounting screw pattern Maximum distance between the mounting bracket screw positions: 350mm height / 80mm width Front interface 2 USB (Universal Serial Bus) 3.0 Audio in/out Power button with LED (blue) HDD activity LED (blue) Reset button Package contents Define S computer case User manual Accessory box

















...

- Designed for silent computing, while not compromising on airflow & cooling capabilities
- Innovative internal layout,

...

The Fractal Design Define S2 is the logical continuation of the sought after designer case series from Fractal & fulfills the role of an attractive yet reserved case design in a way few others do
- & then they paired it with the ability to hold the latest & greatest hardware too. In terms of the design features, the case offers clean & angular lines with brushed aluminium-look plastic. The Define S2 offers many options for installing custom watercooling. Features Noise dampening in front- & side panel Modular roof dampening & dust filters Side panel in tempered glass Space for a 360 mm radiator in the front Space for a 420 mm radiator in the roof Varied mounting options for watercooling Up to 440 mm long graphics cards Magnetic front filter & removable bottom filter DEFINE S2: NOISE DAMPENED MIDI-TOWER FOR CUSTOM WATERCOOLING Like all the cases in the Define range, the Define S2 is noise dampened. The front, the right side panel & the roof are kitted out with insulating material, while the Modi-Vent covers in the roof can also be easily removed. The dust filters can be removed & replaced without issue to meet your airflow needs. In order to cool the hardware in as effective & quiet manner possible, the case supports the installation of custom watercooling. On the front of a case, a 360 mm radiator can be installed, while the roof even allows for a 420 mm long radiator, as long as the combination of rad & fan does not exceed a thickness of 3.5cm. Furthermore, up to 240/280 mm fans/radiators can be installed in the bottom. The rear of the case has a slot for a 120 mm radiator to replace the pre-installed fan. Graphics cards may be up to 44 cm long, although other components may restrict the actual maximum possible length of the graphics card. Alternatively graphics cards may be installed in a vertical orientation. CPU coolers can be up to 185 mm high, while three brackets are available on the rear of the front side to each hold a 2, 5"- or 3, 5" drive. in addition there are also two brackets located behind the motherboard tray for two SSDs. The case

Includes:: a slot for the new USB 3.1 Type C connector that can be inserted in either orientation for your convenience, two further USB (Universal Serial Bus) 3.0- & USB (Universal Serial Bus) 2.0 ports as well as two audio jacks. After removing the front panel, users have access to the magnetically attachable dust filter. An additional dust filter covers the whole of the bottom of the case & is likewise removable. Specifications: Dimensions: 233 x 465 x 543 mm (W x H x D)

Material: Steel, tempered glass, plastic Weight: approx. 11, 6kg

Colour: Black, White (PCI slots, fan blades) Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX Total possible fans: 3x 120/140 mm (front) 1x 120/140 mm (rear) 2x 120/140 mm (bottom) 3x 120/140 mm (roof) Pre-installed: Front: 2x 140 mm (Dynamic X2 GP-14) Ruckseite: 1x 140 mm (Dynamic X2 GP-14) Filter: Roof, bottom, front (removable) Radiator Mountings: 1x max. 360/280 mm (Front) 1x max. 360/420 mm (Roof, max. 3.5cm incl. fan) 1x max. 240/280 mm (Bottom) 1x 120 mm (Rear) Drive Bays: 2x 2, 5" (internal) 2x 3, 5/2, 5" (internal) PSU: 1x Standard ATX (optional) Expansion slots: 7 + 2 vertical I/O Panel: 1x USB (Universal Serial Bus) 3.1 Type C 2x USB (Universal Serial Bus) 3.0 2x USB (Universal Serial Bus) 2.0 1x Reset Button 1x Power Button 1x je HD Audio In/ Out Max GPU length: max. 440 mm Max CPU cooler

Height: max. 185 mm Max PSU length: max 300 mm (without fan in bottom)








...

Customer note: Stock from September 27th 2011 onwards is the new USB3.0 version of the define R3. There is 1x USB3.0 port on the front panel as well as 2x USB2.0 ports As the name implies, Define XL is the larger sibling of the acclaimed & award winning Define R2/R3 case. It is similar to the Define R2/R3, & offers a number of interesting functions with a very stylish appearance. It is a case focused on low noise level, without neglecting other important features such as cooling, expandability & ease of use. Features Stylish design Pre-fitted with noise absorbing material Configurable thermal chamber design Great cooling possibilities, 3x fans included (2x 140mm, 1x 180mm) 10x HDD slots Unique Modu Vent™ design in side panel An important feature of the XL is the division into three thermal chamber designs. This enables the user to freely choose the best thermal configuration suited for their needs. 1. The upper main chamber, contains most of the components, such as motherboard, ODD & one HDD cage. This main chamber is cooled by one 140mm fan in the front (included), one 120mm fan in the front (optional), one 140mm fan in the rear (included), one 120 or 140mm fan in the side panel (optional) & one 180mm fan in the top (included). The top 180mm fan is mounted at an angle, blowing out hot air through the rear side of the case. As mentioned earlier, the top cover has a clear acoustic advantage in that it prevents noise being emitted from the top of the case. 2. The second thermal chamber (PSU chamber) is connected to the main chamber with a removable lid. Due to the lid being removable, it is possible to turn the PSU upside down which will then expel air from within the main chamber. Alternatively the PSU can be installed with the fan facing the bottom of the case. Air is then brought into the PSU from underneath the case through the supplied air filter. 3. The third chamber is the lower HDD chamber, consisting of room for six hard drives. This chamber is cooled by an optional 140mm fan at the front. By default the air flows over the HDDs & therefore becomes warm. It then exits the system behind the right side panel (seen from the front) & out of the rear of the case. However, the user can decide to remove the dividing metal panel between the lower HDD chamber & the PSU chamber, to let the air flow over the PSU & out of the rear ventilation holes. Another unique feature with the XL is the Modu Vent™, inherited from the Define R2/R3 case. This is a cover fitted with noise absorbing material, mounted in the side panel fan aperture, allowing the user to choose between an optimal low noise level, having the cover mounted or optimal airflow by removing the cover & mounting a fan for air intake. Dimensions 232 x 560 x 561.3mm Weight 17.95kg Motherboard Compatibility Mini ITX, Micro ATX, ATX & E-ATX Power Supply Compatibility Standard ATX, can accommodate long PSUs PCI/AGP Card Compatibility Full size, any length 3.5" Drive Bays 10, all SSD compatible 5.25" Drive Bays 4, one bay converts to 3.5" for floppy or card reader Roof Cooling Fans 1x 180mm fan (supplied) Rear/ Side Cooling Fans Side 1x 120 or 140mm side fan (not supplied), Rear 1x 140mm rear fan (supplied) Front/ Floor Cooling Fans Front 2x 140mm fan (one supplied), 1x 120mm fan (not supplied) Expansion Card Slots 7, with sleek white painted brackets Front I/O Ports 1x USB3.0, 1x USB (Universal Serial Bus) 2.0, 1x e SATA & Audio I/O Accessories PCI fan controller, controllers up to 3 fans ...

As the name implies, Define XL is the larger sibling of the acclaimed & award winning Define R2/R3 case. Similar to Define R2/R3, it offers a number of interesting functions with a very stylish appearance. Its a case focused on low noise level, without neglecting other important features such as cooling, expandability & ease of use. ...

Fractal Design builds on the success of its awarding-winning Define XL computer case with the Define XL R2. This updated chassis carries on the family tradition of providing superb cooling & ventilation capabilities with exceptional expandability, in a sleek & stylish Scandinavian form. The Define XL R2, which

Includes:: Fractal Design’s innovative Modu Vent™ feature, has an updated internal layout that offers greater expandability, modularity & flexibility, including capacity for 9 PCI cards & two HDD cages that can be repositioned to provide more space for water cooling radiators. Key features High density noise-reducing material for an optimal silent case Patented Modu Vent™ design allowing the user to choose between optimal silence or maximum airflow. With a new internal layout & additional PCI expansion slots, it can harbor the most powerful enthusiast systems. Both HDD cages can be removed or repositioned
- Top HDD cage can be removed or repositioned for increased airflow whereas bottom HDD cage can be repositioned further into the case to allow for front radiator mount. The case can fit water cooling equipment in the front, top, rear & bottom without major modifications. Three-speed fan controller is strategically integrated in the front panel & supports up to 3 fans Three Silent Series R2 fans are included, featuring hydraulic bearings which contribute to a longer life expectancy – Silent Series R2 retail fans now come standard in all cases New tool-less front fan holder makes switching front fans a breeze Specifications ATX, Micro ATX, mini-ITX, E-ATX & XL-ATX motherboard compatibility 4
- 5.25" bays 8
- 3.5" HDD trays
- all compatible with SSDs A total of 9 expansion slots 3
- Modu Vent™ plates – two in the top & one in the side 7
- Fan positions (3 fans included) Filtered fan slots in front & bottom CPU coolers up to 170 mm tall (when no fan is installed in the side panel) PSU compatibility: ATX PSUs up to 190 mm deep when using the bottom fan location; when not using this fan location longer PSUs (up to 345 mm deep) can be used Graphics card compatibility: Graphics cards up to 330mm in length with the top HDD cage installed
- With the top cage removed, graphics cards up to 480mm in length may be installed 26 mm of space for cable routing behind the motherboard plate Thick rubber grommets on all holes on the motherboard plate Colors available: Black Pearl, Titanium Grey Case

Dimensions (Wx Hx D): 232 x 559 x 560mm Net weight: 16.4kg Package

Dimensions (Wx Hx D): 322 x 637 x 655mm Package weight: 19kg Cooling system Front: 1
- 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed); 1
- 120/140mm fan (not included) Rear: 1
- 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Top: 2
- 120/140mm fans (not included) – positions also support 240/280mm slim radiators Bottom: 1
- 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Side: 1
- 120/140mm fan (not included) Fan controller: 1
- Integrated fan controller for up to 3 fans (included) Water cooling compatibility: Front – 240mm radiator when HDD cages are removed or repositioned Top – 240 & 280mm when using slim radiators Bottom – 120mm radiators Rear – 120 & 140mm radiators Front interface 2
- USB (Universal Serial Bus) 3.0, 2
- USB (Universal Serial Bus) 2.0 Audio in/out Power button with LED (blue) Reset button Fan controller (behind door) Package contents Define XL R2 computer case Accessory box User manual





















...

Fractal Design Dynamic Series Gp-12 (120mm) Computer Case Fan Fractal Design FD-FAN-DYN-GP12-BK. Suitable for: Computer case, Type: Fan, Fan diameter: 12 cm. Colour of product: Black, Cable length: 0.5 m. Power supply: 1.44 W, Maximum current: 0.18 A.

Width: 12 cm,

Depth: 12 cm,

Height: 2.5 cm. Bearing technology: Hydraulic Product description Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Design Cable length 0.5 m Colour of product Black Other features Bearing technology Hydraulic Performance Fan diameter 12 cm Maximum air pressure 0.88 mm H2O Maximum airflow 52.3 cfm Maximum spin speed 1200 RPM Mean time between failures (MTBF) 40000 h Mounting hole pattern (Wx D) 105 x 105 mm Noise level (high speed) 19.4 d B Suitable for Computer case Type Fan Power Maximum current 0.18 A Power supply 1.44 W Voltage 12 Technical details Fan connector 3-pin Weight &

Dimensions Depth 12 cm Height 2.5 cm Package depth 12.2 cm Package height 2.6 cm Package width 14.2 cm Weight 200 g Width 12 cm









...

Fractal Design Dynamic GP-12 & GP-14 are true all-purpose fans, with good airflow in any usage scenario. Their customized design lends to a beautifully aesthetic fan to help keep your system cool, yet quiet. Designed with leading technology techniques in mind, the Dynamic Series fans feature aerodynamic elements, similarly found in airplane wing designs, with significant noise-reducing elements, resulting in a fantastic price-performance ratio. The Dynamic Series fans come in two color combinations: all-black & the classic Fractal Design signature color scheme with white blades & black frame. Key features Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Fan GP-12 Size [mm] 120*120*25mm Color available White blades, black frame Screw hole pattern 105*105mm Connector 3-pin fan header Bearing Hydraulic Number of blades 7 Rotational speed [RPM] 1200 Acoustical noise [d B (A)] 19.4 Maximum air flow [CFM] 52.3 Maximum pressure [mm H2O] 0.88 Actual input power [W] 1.44 Maximum rated input current [A] 0.18 Nominal input voltage [V] 12 Minimum startup voltage [V] 4 MTBF [hours] 40, 000 Unit weight [g] 119 Package weight [g] 160 Cable length [mm] 500 Cable type Black ribbon cable

...

Fractal Design Dynamic Series Gp-14 (140mm) Computer Case Fan Fractal Design Dynamic GP-12 & GP-14 are true all-purpose fans, with good airflow in any usage scenario. Their customized design lends to a beautifully aesthetic fan to help keep your system cool, yet quiet. Designed with leading technology techniques in mind, the Dynamic Series fans feature aerodynamic elements, similarly found in airplane wing designs, with significant noise-reducing elements, resulting in a fantastic price-performance ratio. The Dynamic Series fans come in two color combinations: all-black & the classic Fractal Design signature color scheme with white blades & black frame. Key features Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Fan GP-14 Size [mm] 140*140*25mm Colors available Black blades, black frame Screw hole pattern 125*125mm Connector 3-pin fan header Bearing Hydraulic Number of blades 7 Rotational speed [RPM] 1000 Acoustical noise [d B (A)] 18.9 Maximum air flow [CFM] 68.4 Maximum pressure [mm H2O] 0.71 Actual input power [W] 1.7 Maximum rated input current [A] 0.20 Nominal input voltage [V] 12 Minimum startup voltage [V] 4 MTBF [hours] 40, 000 Unit weight [g] 142 Package weight [g] 190 Cable length [mm] 500 Cable type Black ribbon cable

...

Fractal Design Dynamic Series Gp-14 (140mm) Computer Case Fan (black/white) Fractal Design FD-FAN-DYN-GP14-WT. Suitable for: Computer case, Type: Fan, Fan diameter: 14 cm. Colour of product: Black, White, Cable length: 0.5 m. Power supply: 1.7 W, Maximum current: 0.2 A.

Width: 14 cm,

Depth: 14 cm,

Height: 2.5 cm. Bearing technology: Hydraulic Product description Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Design Cable length 0.5 m Colour of product Black, White Other features Bearing technology Hydraulic Performance Fan diameter 14 cm Maximum air pressure 0.71 mm H2O Maximum airflow 68.4 cfm Maximum spin speed 1000 RPM Mean time between failures (MTBF) 40000 h Mounting hole pattern (Wx D) 125 x 125 mm Noise level (high speed) 18.9 d B Suitable for Computer case Type Fan Power Maximum current 0.2 A Power supply 1.7 W Voltage 12 Technical details Fan connector 3-pin Weight &

Dimensions Depth 14 cm Height 2.5 cm Package depth 14.2 cm Package height 2.6 cm Package width 16.7 cm Weight 250 g Width 14 cm









...