The Core 3000 USB (Universal Serial Bus) 3.0 has plenty of cooling options with space to install up to 7 fans of various sizes. The front panel is easily removable & pre-fitted with fan filters to ensure a dust free interior. The sleek black interior is matched & contrasted with white expansion slots & HDD trays. Similar to the Define Series, all the HDD trays are fitted with anti-vibration silicon grommets. The upper HDD cage is removable & rotatable, which allows for installation of even the longest graphic cards. Key features Simple yet elegant front panel with mesh & filter NEW: USB (Universal Serial Bus) 3.0 support on front I/O Three Silent Series R2 fans included Optimized for performance with multiple cooling options A total of 7 fan slots (1
- 120mm + 1
- 140mm in front, 2
- 120/140mm in top, 1
- 120mm in bottom, 1
- 120mm in rear, 1
- 120/140mm in side panel) Six white painted HDD trays complete with silicon vibration dampening grommets
- each tray supports 3.5" or 2.5" HDD/SSDs Upper HDD cage is rotatable & removable Easily removable front panel with clip on fan slots Dust filters for PSU & front fan positions Specifications Mini ITX, Micro ATX, ATX & DTX motherboard compatibility 6 -3.5" HDD trays, all compatible with 2.5" SSDs 2 -5.25" bays 2
- ODD slots 1
- FDD slot, using convertor in ODD slot (convertor included) 7 expansion slots with sleek white painted brackets Supports graphic card up to 270mm in length when all HDD cages are installed Supports graphic card up to 420mm in length with upper HDD cage removed Supports CPU coolers with height of 160mm Supports PSUs with a depth of maximum circa 160mm, when bottom 120mm fan is installed. When not using the bottom 120mm fan location, the case supports longer PSUs, typically 250mm in length Removable filter below PSU (PSU not included) Case

Dimensions (Wx Hx D): 200 x 444 x 480mm (including front panel & feet) Net weight: 7.9kg Package

Dimensions (Wx Hx D): 268 x 550 x 488mm Package weight: 8.9kg Cooling system Front: 1
- 140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed); 1
- 120mm fan (not included) Rear: 1
- 120mm fan (included is a hydraulic bearing 120mm Silent Series R2 fan, 1200 RPM speed) Top: 2
- 120/140mm fans (included is one hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Bottom: 1
- 120mm fan (not included) Side: 1
- 120/140mm fan (not included) Three-channel PCI bracket fan controller Front interface 2
- USB (Universal Serial Bus) 3.0 with internal connector 2
- USB (Universal Serial Bus) 2.0 1
- 3.5mm audio in (mic) 1
- 3.5mm audio out (headphone) Power button with LED HDD LED Reset button Package contents Core 3000 USB (Universal Serial Bus) 3.0 computer case Accessory box User manual






















...

The new Fractal Design Core 3000 Case offers a unique combination of design, features, cooling performance & value. Key features ...

The Core 3300 is the Wide-body ATX Mid Tower of the x 3 Series. It offers many benefits typically only seen in significantly more expensive cases, such as great cable management, multiple radiator support, & superior ease of use. It comes with two pre-installed 140mm fans, & can support up to two 240mm radiators or both a 240mm & a 280mm radiator. An innovative vertical hard drive bracket can fit a total of six drives
- three 3.5" drives & three 2.5" drives. In addition, two additional SSD drive can be placed behind the motherboard tray. A beautiful build is easy to achieve with the black/white contrasted interior & well-designed cable routing capabilities. Key features A Wide Body mid tower case with bottom-mounted PSU, designed for exceptional airflow & cooling. Brushed aluminum-look front panel with a sleek, three-dimensional textured finish Superior water cooling support, supporting one 240/280mm radiator in the front & a 240mm radiator in the top Featuring a 140mm rear exhaust fan for optimal cooling Total 7 fan slots with two Silent Series R2 140mm fans included Smart cable management with 22mm of space behind the motherboard plate for clean installations Supports extremely tall tower CPU coolers, up to 185mm in height Multiple easy-to-clean dust filters designed into the case to help maintain a dust free interior Innovative vertical HDD bracket, which simultaneously holds three 3.5" drives & three 2.5" drives Two additional SSD positions behind the motherboard plate Specifications ATX, E-ATX (up to 295 mm wide) Micro ATX, Mini ITX motherboard compatibility 2 drive bays of 5, 25" 3 bays 3.5"- all compatible with SSDs 2 -2.5" dedicated SSD unit position 7 expansion slots Support Graphics cards up to 430mm. One or more 3.5" hard drives may interfere with side-mounted power connectors on graphics cards longer than 255 mm Support cooling system: 7
- Fan positions (2 Silent Series R2 fans included) Filtered fan slots in front & bottom CPU coolers up to 185 mm in height ATX PSUs up to 170 mm deep when using the bottom fan location for a 140mm fan; when not using this fan location longer PSUs can be used 22 mm of space for cable routing behind the motherboard plate Available in Black Case

Dimensions (Wx Hx D):233 x 451 x 517mm Net weight: 7.8kg Package

Dimensions (Wx Hx D): 322 x 625 x 540mm Package weight: 9.3kg Cooling system Front: 2
- 120/140mm fans (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Rear: 1
- 120/140mm fan (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Top: 2
- 120/140mm fan (not included) Bottom: 1
- 120/140mm fan (not included, PSU length limits apply) Side: 1
- 120/140mm fan (not included) Water Cooling compatibility Front “30mm thick 240 or 280mm radiator: 15mm fan spacing required for full fastening, radiators with 20mm fan spacing can be used with only the top half fastened to the case. (radiators of any thickness may be used if all 3.5" positions are empty) Top “ 30mm thick 240mm radiator (with no components on the upper 11 mm on the motherboard that are taller than 38mm) Top “ 30mm thick 280mm radiator with slim fans Rear “ 120/140 mm radiator Front interface 2
- USB (Universal Serial Bus) 3.0 Audio in/out Power button with LED (white) HDD activity LED (white) Reset button Package contents Core 3300 computer case Accessory box User manual Additional information EAN:7350041081968 UPC: 817301011969 Product code: FD-CA-CORE-3300-BL











...

Fractal Design Core 3500 is a wide body mid tower ATX case, also available in a Windowed side panel version, allowing users to show off their build. High-performance features include superior liquid cooling potential with support for up to two 240mm radiators or a 280mm radiator Key features A wide body mid tower case with bottom-mounted PSU, designed for exceptional airflow & cooling. Brushed aluminum-look front panel with a sleek, three-dimensional textured finish Superior water cooling support, supporting one 240/280mm radiator in the front & a 240mm radiator in the top Featuring a 140mm rear exhaust fan for optimal cooling Total 7 fan slots with two Silent Series R2 140mm fans included Smart cable management with 22mm of space behind the motherboard plate & thick rubber grommets for clean installations Supports extremely tall tower CPU coolers, up to 185mm in height Featuring an integrated three-speed fan controller Multiple easy-to-clean dust filters designed into the case to help maintain a dust free interior Four vibration dampening hard drive trays for up to four 3.5" HDDs, all compatible with 2.5" drives HDD trays split into two cages & strategically positioned with a large space in between to support all long graphics cards up to a maximum length of 430mm in the top four slots, & cards up to 295mm in length in the bottom three slots Two additional SSD positions behind the motherboard plate Specifications ATX, E-ATX (up to 295 mm wide) Micro ATX, Mini ITX motherboard compatibility 2 drive bays of 5, 25" 4 bays 3.5"- all compatible with SSDs 2 -2.5" dedicated SSD unit position 7 expansion slots Graphics cards up to 430mm in length may be installed in the upper four slots With HDD cage in primary position, cards up to 295mm can be installed in bottom three slots With HDD cage in the secondary position graphics cards up to 260mm are supported in the bottom three slots Support cooling system: 7 Fan positions (2 fans included) Filtered fan slots in front & bottom CPU coolers up to 185 mm in height Integrated fan controller ATX PSUs up to 170 mm deep when using the primary bottom fan location for a 140mm fan; when not using this fan location longer PSUs can be used 22 mm of space for cable routing behind the motherboard plate Thick rubber grommets on all holes on the motherboard plate Available in Black Case

Dimensions (Wx Hx D):233 x 465 x 517mm Net weight: 8.6kg Package

Dimensions (Wx Hx D): 322 x 625 x 540mm Package weight: 10.1kg Cooling system Front: 2
- 120mm fans (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Rear: 1
- 120/140mm fan (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Top: 2
- 120/140mm fan (not included) Bottom: 1
- 120/140mm fan (not included, PSU length limits apply) Side: 1 -120/140mm fan (not included) 1
- integrated fan controller on the backside for up to 3 fans Water Cooling compatibility Front “ Slim 240 or 280mm radiator: 15mm fan spacing required for full fastening, radiators with 20mm fan spacing can be used with only the top half fastened to the case. (with lower HDD cage moved to secondary position) Front
- Thick 240 or 280mm radiators supported with HDD cage in alternate position or completely removed. Motherboards larger than m ATX are not fully supported with HDD cage in the tertiary position. Top “ Slim 240mm radiator (with no components on the upper 11 mm on the motherboard that are taller than 38mm) Top “ Slim 280mm radiator with slim fans Rear “ 120/140 mm radiator Front interface 2
- USB (Universal Serial Bus) 3.0 Audio in/out Power button with LED (white) HDD activity LED (white) Reset button Package contents Core 3500 computer case Accessory box User manual Additional information EAN:7350041081975 UPC: 817301011976 Product code: FD-CA-CORE-3500-BL










...

Fractal Design Core 3500 is a wide body mid tower ATX case, High-performance features include superior liquid cooling potential with support for up to two 240mm radiators or a 280mm radiator. Now featuring the option to have your Core 3500 case with a large fully transparent window allowing you to display your setup in style. Key features A remarkably spacious midi tower case with bottom-mounted PSU, designed for exceptional airflow & cooling. Brushed aluminum-look front panel with a sleek, three-dimensional textured finish Superior water cooling support, supporting one 240/280mm radiator in the front & a 240mm radiator in the top A large, tinted, acrylic side panel window to show off your build Featuring a 140mm rear exhaust fan for optimal cooling Total 6 fan slots with three Silent Series R2 140mm fans included Motherboard plate with 22mm of cable routing space behind it, for effortless clean installations Supports extremely tall tower CPU coolers, up to 180mm in height Featuring an integrated three-speed fan controller Multiple easy-to-clean dust filters designed into the case to help maintain a dust free interior Four vibration dampening hard drive trays for up to four 3.5" HDDs, all compatible with 2.5" drives HDD trays split into two cages & strategically positioned with a large space in between to support all long graphics cards up to a maximum length of 430mm in the top four slots, & cards up to 295mm in length in the bottom three slots Two additional SSD positions behind the motherboard plate Specifications ATX, E-ATX (up to 295 mm wide), Micro ATX, Mini ITX motherboard compatibility 2 drive bays of 5, 25" 4 bays 3.5"- all compatible with SSDs 2 -2.5" dedicated SSD unit position 7 expansion slots Graphics cards up to 430mm in length may be installed in the upper four slots With HDD cage in primary position, cards up to 295mm can be installed in bottom three slots With HDD cage in the secondary position graphics cards up to 260mm are supported in the bottom three slots Support cooling system: 6
- Fan positions (3 Silent Series R2 fans included) Filtered fan slots in front & bottom CPU coolers up to 180 mm in height Integrated fan controller ATX PSUs up to 170 mm deep when using the primary bottom fan location for a 140mm fan; when not using this fan location longer PSUs can be used Including a large 270 x 290mm tinted window 22 mm of space for cable routing behind the motherboard plate Thick rubber grommets on all holes on the motherboard plate Available in Black Case

Dimensions (Wx Hx D):233 x 465 x 517mm Net weight: 8.6kg Package

Dimensions (Wx Hx D): 322 x 625 x 540mm Package weight: 10.1kg Cooling system Front: 2
- 120/140mm fans (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Rear: 1
- 120/140mm fan (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Top: 2
- 120/140mm fan (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Bottom: 1
- 120/140mm fan (not included, PSU length limits apply) 1
- integrated fan controller on the backside for up to 3 fans Water Cooling compatibility Front “ Slim 240 or 280mm radiator. 15mm fan spacing required for full fastening, radiators with 20mm fan spacing fan be used with only the top half fastened to the case. (with lower HDD cage moved to secondary position) Front
- Thick 240 or 280mm radiators supported with HDD cage in alternate position or completely removed. Motherboards larger than m ATX are not fully supported with HDD cage in the tertiary position. Top “ Slim 240mm radiator (with no components on the upper 11 mm on the motherboard that are taller than 38mm) Top “ Slim 280mm radiator with slim fans Rear “ 120/140 mm radiator Front interface 2
- USB (Universal Serial Bus) 3.0 Audio in/out Power button with LED (white) HDD activity LED (white) Reset button Package contents Core 3500 Window computer case Accessory box User manual Additional information EAN:7350041081982 UPC: 817301011983 Product code: FD-CA-CORE-3500-BL-W











...

Re-defining versatility. The Define 7 is the latest pinnacle of the renowned Define series, setting a new standard for what you should expect from a mid-tower case when it comes to modularity, flexibility & ease of use. The dual-layout interior, industrial sound damping, & classic styling make it an easy choice for any design-conscious PC builder in need of a versatile & dependable case that accommodates ambitious builds & leaves you room to grow. Key

Features: Spacious & extensively adaptable dual-layout interior easily accommodates large motherboards up to & including 285 mm E-ATX Support for radiators up to 360 mm in front, 420 mm up top, or 280 mm in the base in the default Open Layout Convert to Storage Layout for up to 14 HDDs along with 4 dedicated SSD mounts & one ODD bay (6 HDD/SSD + 2 SSD brackets + 1 multi-bracket included) The single 5.25” ODD bay can be converted to an additional 140 mm front fan mount with filtered louver covering Silence-optimized construction with industrial sound-damped front, top, & side panels Top panel effortlessly swaps from sound-damped solid steel to filtered ventilation New chassis design opens up to fully expose the case interior for totally unhindered installation & cable routing Anodized aluminium front panel with reversible dual-handed hinges opens & closes easily with magnetic latching Outstanding cooling capacity with a total of 9 x 120/140 mm fan mounts & three preinstalled Dynamic X2 GP-14 fans Versatile new multi-brackets convert any unused fan position to an HDD, SSD or pump mount Two vertical GPU slots for use with the Flex VRC-25 PCIe riser, available separately Five front USB (Universal Serial Bus) ports including one USB (Universal Serial Bus) 3.1 Gen 2 Type-C with fast charging support & speeds up to 10 Gbps Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans & six 3-pin fans directly in line with cable channels along the edge of the case Redesigned HDD cage for easier installation & enhanced transportation security Tool-less, top-latching panels allow quick access while preventing accidental drops Bridgeless expansion slots ensure obstruction-free connections for easier installation & hookup Ventilated PSU shroud with two-part removable cover for optimal coverage & front radiator support Easy-to-clean high airflow nylon filters on the front, top & base with full PSU coverage & convenient front access Detachable PSU cable shield & integrated cable guides with Velcro straps further simplify cable management behind the board

...

Re-Defining versatility The Define 7 is the latest pinnacle of the renowned Define series, setting a new standard for what you should expect from a mid-tower case when it comes to modularity, flexibility & ease of use. The dual-layout interior, industrial sound damping, & classic styling make it an easy choice for any design-conscious PC builder in need of a versatile & dependable case that accommodates ambitious builds & leaves you room to grow.

Features: Dual-layout interior Support for E-ATX Motherboards Support for radiators up to 360mm in front, 420mm up top, or 280mm in the base Storage Layout supports up to 14 HDDs along with 4 dedicated SSD mounts & one ODD bay (6 HDD/SSD + 2 SSD brackets + 1 multi-bracket included) 5.25” Optical Drive Bay Industrial sound-damped front, top, & side panels Anodized aluminium front panel Outstanding cooling capacity with a total of 9 x 120/140mm fan mounts Two vertical GPU slots for use with the Flex VRC-25 PCIe riser, available separately Five front USB (Universal Serial Bus) ports including one USB (Universal Serial Bus) 3.1 Gen 2 Type-C Ultra-slim Nexus+ 2 fan hub Easy-to-clean high airflow nylon filters on the front, top & base with full PSU coverage Integrated cable guides with Velcro straps further simplify cable management behind the board Generous Space Define 7’s roomy internal layout easily accommodates large motherboards up to & including E-ATX. Flexible Duel-Layout Design You’ll find more than enough space for your custom water loop with large reservoirs & radiators up to 420 mm in the default Open Layout. Superlative Storage Convert to Storage Layout & install up to 14 HDDs alongside four dedicated SSDs mounts. (6 SSD/HDD trays + 2 SSD brackets + 1 multi-brackets included) Exceptionally Silent Solid construction with industrial high-density sound damping helps maintain whisper silent operation. Open & Interchangeable Remove the entire top to build & route with zero hindrance. Swap in the ventilated panel to add three filtered fan positions. Elegant New Front Design Brushed aluminium encases a refined front door design with dual-handed reversible hinges & magnetic latching. Superior Airflow Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans. Versatile New Multi-Brackets The included multi-bracket lets you convert any unused fan position to an HDD, SSD or pump mount. SPECIFICATIONS: 3.5"/2.5" drive mounts
- 6 x included, 14 x positions total Dedicated 2.5" drive mounts
- 2 x trays included, 4 x positions total 5.25” drive mounts
- 1 Expansion slots
- 7 + 2 Motherboard compatibility
- E-ATX (max 285mm) / ATX / m ATX / m ITX Power supply form factor
- ATX I/O Panel
- 1 x USB (Universal Serial Bus) 3.1 Gen 2 Type-C 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 Audio I/O Power button Reset button Total fan mounts
- 9 x 120/140 mm Front fan support
- 3 x 120/140 mm (2 x Dynamic X2 GP-14 included) Top fan support
- 3 x 120/140 mm Rear fan support
- 1 x 120/140 mm (1 x Dynamic X2 GP-14 included) Bottom fan support
- 2 x 120/140 mm Dust filters
- Top, 2 x front, full length bottom Front radiator support
- Up to 360/280 mm Top radiator support
- Up to 360/420 mm Rear radiator support
- 120mm Bottom radiator support
- Up to 240/280 mm PSU max length
- 250 mm (with HDD cage installed) GPU max length
- Storage layout: 315mm / Open layout: 491mm (467 mm w/ front fan) CPU cooler max height
- 185mm Cable routing space
- 30mm Cable routing grommets
- Yes Fixed velcro straps
- Yes Tool-less push-to-lock
- Side panels & top Captive thumbscrews
- HDD brackets, SSD brackets & PSU bracket Left side panel
- Tempered glass Right side panel
- Industrial sound-damped steel Case

Dimensions (Lx Wx H)
- 547 x 240 x 475 mm Gross weight
- 15.94kg
































...

Re-defining versatility. The Define 7 is the latest pinnacle of the renowned Define series, setting a new standard for what you should expect from a mid-tower case when it comes to modularity, flexibility & ease of use. The dual-layout interior, industrial sound damping, & classic styling make it an easy choice for any design-conscious PC builder in need of a versatile & dependable case that accommodates ambitious builds & leaves you room to grow. Key

Features: Spacious & extensively adaptable dual-layout interior easily accommodates large motherboards up to & including 285 mm E-ATX Support for radiators up to 360 mm in front, 420 mm up top, or 280 mm in the base in the default Open Layout Convert to Storage Layout for up to 14 HDDs along with 4 dedicated SSD mounts & one ODD bay (6 HDD/SSD + 2 SSD brackets + 1 multi-bracket included) The single 5.25" ODD bay can be converted to an additional 140 mm front fan mount with filtered louver covering Silence-optimized construction with industrial sound-damped front, top, & side panels Top panel effortlessly swaps from sound-damped solid steel to filtered ventilation New chassis design opens up to fully expose the case interior for totally unhindered installation & cable routing Anodized aluminium front panel with reversible dual-handed hinges opens & closes easily with magnetic latching Outstanding cooling capacity with a total of 9 x 120/140 mm fan mounts & three preinstalled Dynamic X2 GP-14 fans Versatile new multi-brackets convert any unused fan position to an HDD, SSD or pump mount Two vertical GPU slots for use with the Flex VRC-25 PCIe riser, available separately Five front USB (Universal Serial Bus) ports including one USB (Universal Serial Bus) 3.1 Gen 2 Type-C with fast charging support & speeds up to 10 Gbps Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans & six 3-pin fans directly in line with cable channels along the edge of the case Redesigned HDD cage for easier installation & enhanced transportation security Tool-less, top-latching panels allow quick access while preventing accidental drops Bridgeless expansion slots ensure obstruction-free connections for easier installation & hookup Ventilated PSU shroud with two-part removable cover for optimal coverage & front radiator support Easy-to-clean high airflow nylon filters on the front, top & base with full PSU coverage & convenient front access Detachable PSU cable shield & integrated cable guides with Velcro straps further simplify cable management behind the board

...

Re-Defining versatility The Define 7 is the latest pinnacle of the renowned Define series, setting a new standard for what you should expect from a mid-tower case when it comes to modularity, flexibility & ease of use. The dual-layout interior, industrial sound damping, & classic styling make it an easy choice for any design-conscious PC builder in need of a versatile & dependable case that accommodates ambitious builds & leaves you room to grow.

Features: Dual-layout interior Support for E-ATX Motherboards Support for radiators up to 360mm in front, 420mm up top, or 280mm in the base Storage Layout supports up to 14 HDDs along with 4 dedicated SSD mounts & one ODD bay (6 HDD/SSD + 2 SSD brackets + 1 multi-bracket included) 5.25” Optical Drive Bay Industrial sound-damped front, top, & side panels Anodized aluminium front panel Outstanding cooling capacity with a total of 9 x 120/140mm fan mounts Two vertical GPU slots for use with the Flex VRC-25 PCIe riser, available separately Five front USB (Universal Serial Bus) ports including one USB (Universal Serial Bus) 3.1 Gen 2 Type-C Ultra-slim Nexus+ 2 fan hub Easy-to-clean high airflow nylon filters on the front, top & base with full PSU coverage Integrated cable guides with Velcro straps further simplify cable management behind the board Generous Space Define 7’s roomy internal layout easily accommodates large motherboards up to & including E-ATX. Flexible Duel-Layout Design You’ll find more than enough space for your custom water loop with large reservoirs & radiators up to 420 mm in the default Open Layout. Superlative Storage Convert to Storage Layout & install up to 14 HDDs alongside four dedicated SSDs mounts. (6 SSD/HDD trays + 2 SSD brackets + 1 multi-brackets included) Exceptionally Silent Solid construction with industrial high-density sound damping helps maintain whisper silent operation. Open & Interchangeable Remove the entire top to build & route with zero hindrance. Swap in the ventilated panel to add three filtered fan positions. Elegant New Front Design Brushed aluminium encases a refined front door design with dual-handed reversible hinges & magnetic latching. Superior Airflow Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans. Versatile New Multi-Brackets The included multi-bracket lets you convert any unused fan position to an HDD, SSD or pump mount. SPECIFICATIONS: 3.5"/2.5" drive mounts
- 6 x included, 14 x positions total Dedicated 2.5" drive mounts
- 2 x trays included, 4 x positions total 5.25” drive mounts
- 1 Expansion slots
- 7 + 2 Motherboard compatibility
- E-ATX (max 285mm) / ATX / m ATX / m ITX Power supply form factor
- ATX I/O Panel
- 1 x USB (Universal Serial Bus) 3.1 Gen 2 Type-C 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 Audio I/O Power button Reset button Total fan mounts
- 9 x 120/140 mm Front fan support
- 3 x 120/140 mm (2 x Dynamic X2 GP-14 included) Top fan support
- 3 x 120/140 mm Rear fan support
- 1 x 120/140 mm (1 x Dynamic X2 GP-14 included) Bottom fan support
- 2 x 120/140 mm Dust filters
- Top, 2 x front, full length bottom Front radiator support
- Up to 360/280 mm Top radiator support
- Up to 360/420 mm Rear radiator support
- 120mm Bottom radiator support
- Up to 240/280 mm PSU max length
- 250 mm (with HDD cage installed) GPU max length
- Storage layout: 315mm / Open layout: 491mm (467 mm w/ front fan) CPU cooler max height
- 185mm Cable routing space
- 30mm Cable routing grommets
- Yes Fixed velcro straps
- Yes Tool-less push-to-lock
- Side panels & top Captive thumbscrews
- HDD brackets, SSD brackets & PSU bracket Right side panel
- Industrial sound-damped steel Case

Dimensions (Lx Wx H)
- 547 x 240 x 475 mm Gross weight
- 15.94kg































...

Re-Defining versatility The Define 7 is the latest pinnacle of the renowned Define series, setting a new standard for what you should expect from a mid-tower case when it comes to modularity, flexibility & ease of use. The dual-layout interior, industrial sound damping, & classic styling make it an easy choice for any design-conscious PC builder in need of a versatile & dependable case that accommodates ambitious builds & leaves you room to grow.

Features: Dual-layout interior Support for E-ATX Motherboards Support for radiators up to 360mm in front, 420mm up top, or 280mm in the base Storage Layout supports up to 14 HDDs along with 4 dedicated SSD mounts & one ODD bay (6 HDD/SSD + 2 SSD brackets + 1 multi-bracket included) 5.25” Optical Drive Bay Industrial sound-damped front, top, & side panels Anodized aluminium front panel Outstanding cooling capacity with a total of 9 x 120/140mm fan mounts Two vertical GPU slots for use with the Flex VRC-25 PCIe riser, available separately Five front USB (Universal Serial Bus) ports including one USB (Universal Serial Bus) 3.1 Gen 2 Type-C Ultra-slim Nexus+ 2 fan hub Easy-to-clean high airflow nylon filters on the front, top & base with full PSU coverage Integrated cable guides with Velcro straps further simplify cable management behind the board Generous Space Define 7’s roomy internal layout easily accommodates large motherboards up to & including E-ATX. Flexible Duel-Layout Design You’ll find more than enough space for your custom water loop with large reservoirs & radiators up to 420 mm in the default Open Layout. Superlative Storage Convert to Storage Layout & install up to 14 HDDs alongside four dedicated SSDs mounts. (6 SSD/HDD trays + 2 SSD brackets + 1 multi-brackets included) Exceptionally Silent Solid construction with industrial high-density sound damping helps maintain whisper silent operation. Open & Interchangeable Remove the entire top to build & route with zero hindrance. Swap in the ventilated panel to add three filtered fan positions. Elegant New Front Design Brushed aluminium encases a refined front door design with dual-handed reversible hinges & magnetic latching. Superior Airflow Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans. Versatile New Multi-Brackets The included multi-bracket lets you convert any unused fan position to an HDD, SSD or pump mount. SPECIFICATIONS: 3.5"/2.5" drive mounts
- 6 x included, 14 x positions total Dedicated 2.5" drive mounts
- 2 x trays included, 4 x positions total 5.25” drive mounts
- 1 Expansion slots
- 7 + 2 Motherboard compatibility
- E-ATX (max 285mm) / ATX / m ATX / m ITX Power supply form factor
- ATX I/O Panel
- 1 x USB (Universal Serial Bus) 3.1 Gen 2 Type-C 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 Audio I/O Power button Reset button Total fan mounts
- 9 x 120/140 mm Front fan support
- 3 x 120/140 mm (2 x Dynamic X2 GP-14 included) Top fan support
- 3 x 120/140 mm Rear fan support
- 1 x 120/140 mm (1 x Dynamic X2 GP-14 included) Bottom fan support
- 2 x 120/140 mm Dust filters
- Top, 2 x front, full length bottom Front radiator support
- Up to 360/280 mm Top radiator support
- Up to 360/420 mm Rear radiator support
- 120mm Bottom radiator support
- Up to 240/280 mm PSU max length
- 250 mm (with HDD cage installed) GPU max length
- Storage layout: 315mm / Open layout: 491mm (467 mm w/ front fan) CPU cooler max height
- 185mm Cable routing space
- 30mm Cable routing grommets
- Yes Fixed velcro straps
- Yes Tool-less push-to-lock
- Side panels & top Captive thumbscrews
- HDD brackets, SSD brackets & PSU bracket Left Side Panel – Tempered Glass Right side panel
- Industrial sound-damped steel Case

Dimensions (Lx Wx H)
- 547 x 240 x 475 mm Gross weight
- 15.94kg































...