More From Contributor

- Designed for silent computing, while not compromising on airflow & cooling capabilities
- Innovative internal layout,

...

Available

The Fractal Design Define S2 is the logical continuation of the sought after designer case series from Fractal & fulfills the role of an attractive yet reserved case design in a way few others do
- & then they paired it with the ability to hold the latest & greatest hardware too. In terms of the design features, the case offers clean & angular lines with brushed aluminium-look plastic. The Define S2 offers many options for installing custom watercooling. Features Noise dampening in front- & side panel Modular roof dampening & dust filters Side panel in tempered glass Space for a 360 mm radiator in the front Space for a 420 mm radiator in the roof Varied mounting options for watercooling Up to 440 mm long graphics cards Magnetic front filter & removable bottom filter DEFINE S2: NOISE DAMPENED MIDI-TOWER FOR CUSTOM WATERCOOLING Like all the cases in the Define range, the Define S2 is noise dampened. The front, the right side panel & the roof are kitted out with insulating material, while the Modi-Vent covers in the roof can also be easily removed. The dust filters can be removed & replaced without issue to meet your airflow needs. In order to cool the hardware in as effective & quiet manner possible, the case supports the installation of custom watercooling. On the front of a case, a 360 mm radiator can be installed, while the roof even allows for a 420 mm long radiator, as long as the combination of rad & fan does not exceed a thickness of 3.5cm. Furthermore, up to 240/280 mm fans/radiators can be installed in the bottom. The rear of the case has a slot for a 120 mm radiator to replace the pre-installed fan. Graphics cards may be up to 44 cm long, although other components may restrict the actual maximum possible length of the graphics card. Alternatively graphics cards may be installed in a vertical orientation. CPU coolers can be up to 185 mm high, while three brackets are available on the rear of the front side to each hold a 2, 5"- or 3, 5" drive. in addition there are also two brackets located behind the motherboard tray for two SSDs. The case

Includes:: a slot for the new USB 3.1 Type C connector that can be inserted in either orientation for your convenience, two further USB (Universal Serial Bus) 3.0- & USB (Universal Serial Bus) 2.0 ports as well as two audio jacks. After removing the front panel, users have access to the magnetically attachable dust filter. An additional dust filter covers the whole of the bottom of the case & is likewise removable. Specifications: Dimensions: 233 x 465 x 543 mm (W x H x D)

Material: Steel, tempered glass, plastic Weight: approx. 11, 6kg

Colour: Black, White (PCI slots, fan blades) Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX Total possible fans: 3x 120/140 mm (front) 1x 120/140 mm (rear) 2x 120/140 mm (bottom) 3x 120/140 mm (roof) Pre-installed: Front: 2x 140 mm (Dynamic X2 GP-14) Ruckseite: 1x 140 mm (Dynamic X2 GP-14) Filter: Roof, bottom, front (removable) Radiator Mountings: 1x max. 360/280 mm (Front) 1x max. 360/420 mm (Roof, max. 3.5cm incl. fan) 1x max. 240/280 mm (Bottom) 1x 120 mm (Rear) Drive Bays: 2x 2, 5" (internal) 2x 3, 5/2, 5" (internal) PSU: 1x Standard ATX (optional) Expansion slots: 7 + 2 vertical I/O Panel: 1x USB (Universal Serial Bus) 3.1 Type C 2x USB (Universal Serial Bus) 3.0 2x USB (Universal Serial Bus) 2.0 1x Reset Button 1x Power Button 1x je HD Audio In/ Out Max GPU length: max. 440 mm Max CPU cooler

Height: max. 185 mm Max PSU length: max 300 mm (without fan in bottom)

...

Available

Customer note: Stock from September 27th 2011 onwards is the new USB3.0 version of the define R3. There is 1x USB3.0 port on the front panel as well as 2x USB2.0 ports As the name implies, Define XL is the larger sibling of the acclaimed & award winning Define R2/R3 case. It is similar to the Define R2/R3, & offers a number of interesting functions with a very stylish appearance. It is a case focused on low noise level, without neglecting other important features such as cooling, expandability & ease of use. Features Stylish design Pre-fitted with noise absorbing material Configurable thermal chamber design Great cooling possibilities, 3x fans included (2x 140mm, 1x 180mm) 10x HDD slots Unique Modu Vent™ design in side panel An important feature of the XL is the division into three thermal chamber designs. This enables the user to freely choose the best thermal configuration suited for their needs. 1. The upper main chamber, contains most of the components, such as motherboard, ODD & one HDD cage. This main chamber is cooled by one 140mm fan in the front (included), one 120mm fan in the front (optional), one 140mm fan in the rear (included), one 120 or 140mm fan in the side panel (optional) & one 180mm fan in the top (included). The top 180mm fan is mounted at an angle, blowing out hot air through the rear side of the case. As mentioned earlier, the top cover has a clear acoustic advantage in that it prevents noise being emitted from the top of the case. 2. The second thermal chamber (PSU chamber) is connected to the main chamber with a removable lid. Due to the lid being removable, it is possible to turn the PSU upside down which will then expel air from within the main chamber. Alternatively the PSU can be installed with the fan facing the bottom of the case. Air is then brought into the PSU from underneath the case through the supplied air filter. 3. The third chamber is the lower HDD chamber, consisting of room for six hard drives. This chamber is cooled by an optional 140mm fan at the front. By default the air flows over the HDDs & therefore becomes warm. It then exits the system behind the right side panel (seen from the front) & out of the rear of the case. However, the user can decide to remove the dividing metal panel between the lower HDD chamber & the PSU chamber, to let the air flow over the PSU & out of the rear ventilation holes. Another unique feature with the XL is the Modu Vent™, inherited from the Define R2/R3 case. This is a cover fitted with noise absorbing material, mounted in the side panel fan aperture, allowing the user to choose between an optimal low noise level, having the cover mounted or optimal airflow by removing the cover & mounting a fan for air intake. Dimensions 232 x 560 x 561.3mm Weight 17.95kg Motherboard Compatibility Mini ITX, Micro ATX, ATX & E-ATX Power Supply Compatibility Standard ATX, can accommodate long PSUs PCI/AGP Card Compatibility Full size, any length 3.5" Drive Bays 10, all SSD compatible 5.25" Drive Bays 4, one bay converts to 3.5" for floppy or card reader Roof Cooling Fans 1x 180mm fan (supplied) Rear/ Side Cooling Fans Side 1x 120 or 140mm side fan (not supplied), Rear 1x 140mm rear fan (supplied) Front/ Floor Cooling Fans Front 2x 140mm fan (one supplied), 1x 120mm fan (not supplied) Expansion Card Slots 7, with sleek white painted brackets Front I/O Ports 1x USB3.0, 1x USB (Universal Serial Bus) 2.0, 1x e SATA & Audio I/O Accessories PCI fan controller, controllers up to 3 fans ...

Archived Product

As the name implies, Define XL is the larger sibling of the acclaimed & award winning Define R2/R3 case. Similar to Define R2/R3, it offers a number of interesting functions with a very stylish appearance. Its a case focused on low noise level, without neglecting other important features such as cooling, expandability & ease of use. ...

Available

Fractal Design builds on the success of its awarding-winning Define XL computer case with the Define XL R2. This updated chassis carries on the family tradition of providing superb cooling & ventilation capabilities with exceptional expandability, in a sleek & stylish Scandinavian form. The Define XL R2, which

Includes:: Fractal Design’s innovative Modu Vent™ feature, has an updated internal layout that offers greater expandability, modularity & flexibility, including capacity for 9 PCI cards & two HDD cages that can be repositioned to provide more space for water cooling radiators. Key features High density noise-reducing material for an optimal silent case Patented Modu Vent™ design allowing the user to choose between optimal silence or maximum airflow. With a new internal layout & additional PCI expansion slots, it can harbor the most powerful enthusiast systems. Both HDD cages can be removed or repositioned
- Top HDD cage can be removed or repositioned for increased airflow whereas bottom HDD cage can be repositioned further into the case to allow for front radiator mount. The case can fit water cooling equipment in the front, top, rear & bottom without major modifications. Three-speed fan controller is strategically integrated in the front panel & supports up to 3 fans Three Silent Series R2 fans are included, featuring hydraulic bearings which contribute to a longer life expectancy – Silent Series R2 retail fans now come standard in all cases New tool-less front fan holder makes switching front fans a breeze Specifications ATX, Micro ATX, mini-ITX, E-ATX & XL-ATX motherboard compatibility 4
- 5.25" bays 8
- 3.5" HDD trays
- all compatible with SSDs A total of 9 expansion slots 3
- Modu Vent™ plates – two in the top & one in the side 7
- Fan positions (3 fans included) Filtered fan slots in front & bottom CPU coolers up to 170 mm tall (when no fan is installed in the side panel) PSU compatibility: ATX PSUs up to 190 mm deep when using the bottom fan location; when not using this fan location longer PSUs (up to 345 mm deep) can be used Graphics card compatibility: Graphics cards up to 330mm in length with the top HDD cage installed
- With the top cage removed, graphics cards up to 480mm in length may be installed 26 mm of space for cable routing behind the motherboard plate Thick rubber grommets on all holes on the motherboard plate Colors available: Black Pearl, Titanium Grey Case

Dimensions (Wx Hx D): 232 x 559 x 560mm Net weight: 16.4kg Package

Dimensions (Wx Hx D): 322 x 637 x 655mm Package weight: 19kg Cooling system Front: 1
- hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed (included); 1
- 120/140mm fan (not included) Rear: 1
- hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed (included) Top: 2
- 120/140mm fans (not included) – positions also support 240/280mm slim radiators Bottom: 1
- hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed (included) Side: 1
- 140mm fan (not included) Fan controller: 1
- integrated fan controller for up to 3 fans (included) Water cooling compatibility: Front – 240mm radiator when HDD cages are removed or repositioned Top – 240 & 280mm when using slim radiators Bottom – 120mm radiators Rear – 120 & 140mm radiators Front Interface 2
- USB (Universal Serial Bus) 3.0, 2
- USB (Universal Serial Bus) 2.0 Audio in/out Power button with LED (blue) Reset button Fan controller (behind door) Package Contents Define XL R2 computer case Accessory box User manual Additional information EAN/GTIN-13: 7350041081005 UPC: 817301011006 Product code: FD-CA-DEF-XL-R2-BL Available for System Integrators

...

Archived Product

Fractal Design Dynamic Series Gp-12 (120mm) Computer Case Fan Fractal Design FD-FAN-DYN-GP12-BK. Suitable for: Computer case, Type: Fan, Fan diameter: 12 cm. Colour of product: Black, Cable length: 0.5 m. Power supply: 1.44 W, Maximum current: 0.18 A.

Width: 12 cm,

Depth: 12 cm,

Height: 2.5 cm. Bearing technology: Hydraulic Product description Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Design Cable length 0.5 m Colour of product Black Other features Bearing technology Hydraulic Performance Fan diameter 12 cm Maximum air pressure 0.88 mm H2O Maximum airflow 52.3 cfm Maximum spin speed 1200 RPM Mean time between failures (MTBF) 40000 h Mounting hole pattern (Wx D) 105 x 105 mm Noise level (high speed) 19.4 d B Suitable for Computer case Type Fan Power Maximum current 0.18 A Power supply 1.44 W Voltage 12 Technical details Fan connector 3-pin Weight &

Dimensions Depth 12 cm Height 2.5 cm Package depth 12.2 cm Package height 2.6 cm Package width 14.2 cm Weight 200 g Width 12 cm

...

Available

Fractal Design Dynamic GP-12 & GP-14 are true all-purpose fans, with good airflow in any usage scenario. Their customized design lends to a beautifully aesthetic fan to help keep your system cool, yet quiet. Designed with leading technology techniques in mind, the Dynamic Series fans feature aerodynamic elements, similarly found in airplane wing designs, with significant noise-reducing elements, resulting in a fantastic price-performance ratio. The Dynamic Series fans come in two color combinations: all-black & the classic Fractal Design signature color scheme with white blades & black frame. Key features Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Fan GP-12 Size [mm] 120*120*25mm Color available White blades, black frame Screw hole pattern 105*105mm Connector 3-pin fan header Bearing Hydraulic Number of blades 7 Rotational speed [RPM] 1200 Acoustical noise [d B (A)] 19.4 Maximum air flow [CFM] 52.3 Maximum pressure [mm H2O] 0.88 Actual input power [W] 1.44 Maximum rated input current [A] 0.18 Nominal input voltage [V] 12 Minimum startup voltage [V] 4 MTBF [hours] 40, 000 Unit weight [g] 119 Package weight [g] 160 Cable length [mm] 500 Cable type Black ribbon cable

...

Available

Fractal Design Dynamic Series Gp-14 (140mm) Computer Case Fan Fractal Design Dynamic GP-12 & GP-14 are true all-purpose fans, with good airflow in any usage scenario. Their customized design lends to a beautifully aesthetic fan to help keep your system cool, yet quiet. Designed with leading technology techniques in mind, the Dynamic Series fans feature aerodynamic elements, similarly found in airplane wing designs, with significant noise-reducing elements, resulting in a fantastic price-performance ratio. The Dynamic Series fans come in two color combinations: all-black & the classic Fractal Design signature color scheme with white blades & black frame. Key features Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Fan GP-14 Size [mm] 140*140*25mm Colors available Black blades, black frame Screw hole pattern 125*125mm Connector 3-pin fan header Bearing Hydraulic Number of blades 7 Rotational speed [RPM] 1000 Acoustical noise [d B (A)] 18.9 Maximum air flow [CFM] 68.4 Maximum pressure [mm H2O] 0.71 Actual input power [W] 1.7 Maximum rated input current [A] 0.20 Nominal input voltage [V] 12 Minimum startup voltage [V] 4 MTBF [hours] 40, 000 Unit weight [g] 142 Package weight [g] 190 Cable length [mm] 500 Cable type Black ribbon cable

...

Available

Fractal Design Dynamic Series Gp-14 (140mm) Computer Case Fan (black/white) Fractal Design FD-FAN-DYN-GP14-WT. Suitable for: Computer case, Type: Fan, Fan diameter: 14 cm. Colour of product: Black, White, Cable length: 0.5 m. Power supply: 1.7 W, Maximum current: 0.2 A.

Width: 14 cm,

Depth: 14 cm,

Height: 2.5 cm. Bearing technology: Hydraulic Product description Featuring hydraulic bearings; a cost-efficient compromise between a standard sleeve bearing & a true FDB bearing Equipped with a counter-balancing magnet in the hub that reduces the axial tension on the bearing, further protecting the longevity of the bearing Optimized fan geometry for a good balance between static pressure & maximum airflow, resulting in good performance in all usage scenarios Aerodynamically shaped thin stator struts (including wire strut), mimicking the design commonly found on airplane wings, delivering correct angles allowing for air to easily pass through reducing noise & unwanted turbulence. Stator struts are angled perpendicular to the blades, helping to reduce noise commonly emitted when the blades pass the struts. In effect, minimal noise that may be emitted will be constant & therefore almost inaudible to the ear. Strategically placed notches near the fan hub on the trailing edge of the blades, further reducing & diffusing humming noise produced when the blades pass the stator struts

Includes:: a "trip wire" on the rear side of the blades, near the leading edge. The trip wire technology, also commonly found in airplane wing designs, introduces a micro-turbulent layer that helps to combat the elements that negatively affect performance. The presence of the trip wire overall provides a more efficient & quiet fan environment. The customized design of the Dynamic Series fans contributes to a beautiful, cool build Specifications Design Cable length 0.5 m Colour of product Black, White Other features Bearing technology Hydraulic Performance Fan diameter 14 cm Maximum air pressure 0.71 mm H2O Maximum airflow 68.4 cfm Maximum spin speed 1000 RPM Mean time between failures (MTBF) 40000 h Mounting hole pattern (Wx D) 125 x 125 mm Noise level (high speed) 18.9 d B Suitable for Computer case Type Fan Power Maximum current 0.2 A Power supply 1.7 W Voltage 12 Technical details Fan connector 3-pin Weight &

Dimensions Depth 14 cm Height 2.5 cm Package depth 14.2 cm Package height 2.6 cm Package width 16.7 cm Weight 250 g Width 14 cm

...

Available

Fractal Design Define Xl R2 Computer Case (Titanium Grey)

Fractal Design builds on the success of its awarding-winning Define XL computer case with the Define XL R2. This updated chassis carries on the family tradition of providing superb cooling and ventilation capabilities with exceptional expandability, in a sleek and stylish Scandinavian form. The Define XL R2, which includes Fractal Design’s innovative ModuVent™ feature, has an updated internal layout that offers greater expandability, modularity and flexibility, including capacity for 9 PCI cards and two HDD cages that can be repositioned to provide more space for water cooling radiators. Key features High density noise-reducing material for an optimal silent case Patented ModuVent™ design allowing the user to choose between optimal silence or maximum airflow. With a
new internal layout and additional PCI expansion slots, it can harbor the most powerful enthusiast systems. Both HDD cages can be removed or repositioned - Top HDD cage can be removed or repositioned for increased airflow whereas bottom HDD cage can be repositioned further into the case to allow for front radiator mount. The case can fit water cooling equipment in the front, top, rear and bottom without major modifications. Three-speed fan controller is strategically integrated in the front panel and supports up to 3 fans Three Silent Series R2 fans are included, featuring hydraulic bearings which contribute to a longer life expectancy – Silent Series R2 retail fans now come standard in all cases New tool-less front fan holder makes switching front fans a breeze Specifications
ATX, Micro ATX, mini-ITX, E-ATX and XL-ATX motherboard compatibility 4 - 5.25" bays 8 - 3.5" HDD trays - all compatible with SSDs A total of 9 expansion slots 3 - ModuVent™ plates – two in the top and one in the side 7 - Fan positions (3 fans included) Filtered fan slots in front and bottom CPU coolers up to 170 mm tall (when no fan is installed in the side panel) PSU compatibility: ATX PSUs up to 190 mm deep when using the bottom fan location; when not using this fan location longer PSUs (up to 345 mm deep) can be used Graphics card compatibility: Graphics cards up to 330mm in length with the top HDD cage installed - With the top cage removed, graphics cards up to 480mm in length may be installed 26 mm of space for cable routing behind the motherboard plate Thick rubber
grommets on all holes on the motherboard plate Colors available: Black Pearl, Titanium Grey Case dimensions (WxHxD): 232 x 559 x 560mm Net weight: 16.4kg Package dimensions (WxHxD): 322 x 637 x 655mm Package weight: 19kg Cooling system Front: 1 - 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed); 1 - 120/140mm fan (not included) Rear: 1 - 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Top: 2 - 120/140mm fans (not included) – positions also support 240/280mm slim radiators Bottom: 1 - 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Side: 1 - 120/140mm fan (not included) Fan controller: 1 - Integrated fan controller for up to 3 fans (included) Water
cooling compatibility: Front – 240mm radiator when HDD cages are removed or repositioned Top – 240 and 280mm when using slim radiators Bottom – 120mm radiators Rear – 120 and 140mm radiators Front interface 2 - USB 3.0, 2 - USB 2.0 Audio in/out Power button with LED (blue) Reset button Fan controller (behind door) Package contents Define XL R2 computer case Accessory box User manual

Availability: Out Of Stock
Supplier: Ebuyer
SKU: 435334

Description Reviews / Comments Add New

Product Description

Fractal Design builds on the success of its awarding-winning Define XL computer case with the Define XL R2. This updated chassis carries on the family tradition of providing superb cooling & ventilation capabilities with exceptional expandability, in a sleek & stylish Scandinavian form. The Define XL R2, which

Includes:: Fractal Design’s innovative Modu Vent™ feature, has an updated internal layout that offers greater expandability, modularity & flexibility, including capacity for 9 PCI cards & two HDD cages that can be repositioned to provide more space for water cooling radiators. Key features High density noise-reducing material for an optimal silent case Patented Modu Vent™ design allowing the user to choose between optimal silence or maximum airflow. With a new internal layout & additional PCI expansion slots, it can harbor the most powerful enthusiast systems. Both HDD cages can be removed or repositioned
- Top HDD cage can be removed or repositioned for increased airflow whereas bottom HDD cage can be repositioned further into the case to allow for front radiator mount. The case can fit water cooling equipment in the front, top, rear & bottom without major modifications. Three-speed fan controller is strategically integrated in the front panel & supports up to 3 fans Three Silent Series R2 fans are included, featuring hydraulic bearings which contribute to a longer life expectancy – Silent Series R2 retail fans now come standard in all cases New tool-less front fan holder makes switching front fans a breeze Specifications ATX, Micro ATX, mini-ITX, E-ATX & XL-ATX motherboard compatibility 4
- 5.25" bays 8
- 3.5" HDD trays
- all compatible with SSDs A total of 9 expansion slots 3
- Modu Vent™ plates – two in the top & one in the side 7
- Fan positions (3 fans included) Filtered fan slots in front & bottom CPU coolers up to 170 mm tall (when no fan is installed in the side panel) PSU compatibility: ATX PSUs up to 190 mm deep when using the bottom fan location; when not using this fan location longer PSUs (up to 345 mm deep) can be used Graphics card compatibility: Graphics cards up to 330mm in length with the top HDD cage installed
- With the top cage removed, graphics cards up to 480mm in length may be installed 26 mm of space for cable routing behind the motherboard plate Thick rubber grommets on all holes on the motherboard plate Colors available: Black Pearl, Titanium Grey Case

Dimensions (Wx Hx D): 232 x 559 x 560mm Net weight: 16.4kg Package

Dimensions (Wx Hx D): 322 x 637 x 655mm Package weight: 19kg Cooling system Front: 1
- 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed); 1
- 120/140mm fan (not included) Rear: 1
- 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Top: 2
- 120/140mm fans (not included) – positions also support 240/280mm slim radiators Bottom: 1
- 120/140mm fan (included is a hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed) Side: 1
- 120/140mm fan (not included) Fan controller: 1
- Integrated fan controller for up to 3 fans (included) Water cooling compatibility: Front – 240mm radiator when HDD cages are removed or repositioned Top – 240 & 280mm when using slim radiators Bottom – 120mm radiators Rear – 120 & 140mm radiators Front interface 2
- USB (Universal Serial Bus) 3.0, 2
- USB (Universal Serial Bus) 2.0 Audio in/out Power button with LED (blue) Reset button Fan controller (behind door) Package contents Define XL R2 computer case Accessory box User manual

Reviews/Comments

Add New

Intelligent Comparison

Available

Fractal Design Define XL Case Titanium Grey Ebuyer

£132.60

Archived Product

Fractal Design Define Xl R2 Computer Case Ebuyer

£136.49

Available

Fractal Design Dynamic X2 Computer Case Fan Ebuyer

£10.49

Archived Product

Fractal Design Define R5 Black Pearl Computer Case Ebuyer

£107.99

Available

Fractal Design Node 202 Computer Case (black) Ebuyer

£70.52

Jargon Buster

USB - Universal Serial Bus

LED - Light Emitting Diode - a small light source

PCI - Peripheral Component Interconnect - Used as an expansion interface in computers

HDD - Hadr disk drive - an electronic storage media

Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.

CPU - Central processing unit. The processing centre of computer programs. The faster the processor usually the faster the computer

HDD - Hard Disk Drive, an electronic storage device

Computer - A programmable electronic machine which stores and manipulates data.

Grey - A colour often associated with old age (going grey)

Blue - A primary colour

Button - A round or square object used for fastening clothing or other items

rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.

rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.

water - A chemical substance. Chemical formula H2O.

button - A small fastener used on clothing to secure two pieces of fabric together.

Key - A physical or virtual device or code used for opening something

Cable - A series of wires bonded to form a single thread

Graphics - A general term for visual aspects of an item/display

Stylish - A desirable design or layout

RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.

Audio - Also known as sound. An audible vibration wave which can be heard.

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

speed - A measurement of how fast an object travels between two points

USB - Universal Serial Bus. A method of connecting a device to a computer

LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.

Cage - an object that is used to contain something, often animals.

Patented - Something that has legal rights not to be copied, unique.

Radiator - A household item that warms a room.

Exceptional - Something that is very good.

Equipment - A product or good that is tactile.

Accessory - An item that can contribute to an activity or process to enhance its look or performance.

Bearings - A direction or a way someone moves around.

Ventilation - Giving fresh air to a room on someone's lungs.

Manual - A book of instructions to build or operate items, also a form of labour which your hands are used.

Dimensions - The shapes and angles of something or a situation.

Innovative - An idea that shows new method and ways of thinking, an original design.

Design - A drawing or styles that shows the look and functionality of something before its made.

Accessory - An item that is added in order to make the original item more useful or attractive.

Feature - An attribute that makes something stand out.

Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.

Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,

Family - A group of people that live together made up from parents and children.

Supplier Information

Ebuyer

Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.

More From Contributor

Fractal Design Define Xl R2 Computer Case (Titanium Grey)

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account