Vision is the only true complete solution supplier with products ranging from Plasma Display Screens & Data / Video projectors to universal brackets & a wide variety of accessories. Vision has an enviable reputation for being able to move quickly & produce products that the market demands. ...

Designed for use in small meeting rooms & classrooms, the SP-1100P are Vision’s most cost-effective audio solution & represent fantastic value. Great sound quality & Vision’s trademark ease of installation are key features of this product. Digital The SP-1100P is assembled by a fully automated production line to ensure reliability, & uses a quality Yamaha class-D digital amplifier chip. Volume on Front The volume dial is on the front of the ‘master’ loudspeaker – the one containing the amplifier – so users can easily access it. Turning the volume dial fully anti-clockwise turns the power off (standby). Easy to Install Simple “C” brackets are included for swift installation. Flexible Connectivity The rear panel of the master loudspeaker offers minijack & 2-phono inputs. MDF Fabrication A sturdy MDF chassis provides a rigid acoustic chamber for distortion free sound, & the tuned bass reflex port enhances bass. Summed Inputs The two line-level inputs are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source & display devices in the system are powered from the same mains power source. Silk Tweeter A proven two-way design with good quality driver components ensures users will get reliable service for many years. Specifications PRODUCT DIMENSIONS: 150 x 145 x 220 mm (length x width x height for each speaker) PACKAGED DIMENSIONS: 368 x 318 x 193 mm PRODUCT WEIGHT: 3.4kg (per pair) PACKAGED WEIGHT: 5.0kg (per pair) CONSTRUCTION

Material: MDF

Colour: White TECHNICAL

Details: Amplifier Output: 2 x 10w watts (RMS) Woofer: 4& Prime; Tweeter: 1.5& Prime; Silk Input 1: Minijack (3.5mm) Input 2: 2-Phono (RCA) Speaker Output: Spring-loaded bare-wire type Speaker Input (on slave): Spring-loaded bare-wire type Output Impedance: 4 ohms Sensitivity: 85d B (1w/1m) Frequency response: 80 Hz-16k Hz ACCESSORIES INCLUDED: 2 x Wall brackets 1 x Euro Figure-8 Power cable 1.8m long 1 x UK Figure-8 Power cable 1.8m long 1 x AU Figure-8 Power cable 1.8m long 1 x 5m Speaker Cable POWER SUPPLY: 240V Internal Power Supply WARRANTY 2-year return to base





...

New to the Vision range are the new SP-1300 loudspeakers, designed to compliment the AV & C range of Vision audio amplifiers. Optimized for presentations, these high-quality speakers output clear, intelligible audio with a wide dispersion to cover wide areas. Achieve high sound pressure levels with clarity. ...

Features VISION Tech Connect cable raceway faceplate Product Type Cable raceway faceplate Gang Qty
- 2-gang ...

Manufacturer's Part Number: TC 15M3.5MM Product Description: VISION Techconnect
- audio cable
- 15 m Cable: Audio cable Length:

...

The Techconnect is a modular family of products designed to suit any IT, AV, pro audio, office, or home cinema installation. It is simple enough that even a moderately experienced technician can easily install it, & it doesn't require soldering at all due to its phoenix connector captive screw design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want, & swap it out. ...

Use the remote control from your equipment to program the module in a few easy steps. The TECHCONNECT CONTROL2 features increased processing & memory power to cover a wider range of IR protocols. Once fully programmed, the codes from one CONTROL2 module can be duplicated to other Control 2 modules. ...

The Techconnect range features an attractive architectural front surround system making it suitable for corporate & home-cinema applications, plus robust clip-in modules which make it super-quick to install & flexible. It allows seamless integration of connectivity, audio, & control. Plug-In Cables Modules feature plug-in connectors on the rear. Cables come pre-terminated with male connectors which are simply plugged into the rear of the module. Need to shorten or pull a cable? Just unscrew the captive-screw connector. Techconnect gives you the speed of a pre-terminated system with the flexibility you sometimes need. More Space By using multi-layer printed circuit boards we’ve created much more space behind each module for cables. The depth of the VGA module being just 38mm from the front of the module to the rear. Backboxes The Techconnect packages come with a surface-mounted ‘backbox’ & a ‘surround’ – the part the modules clip into. The range

Includes:: various flush & surface mounting backboxes, & all the surrounds conform to standard British sizes so they fit any locally sourced backboxes. Vision also offers Australian & American surrounds which conform to local standards. Backboxes are carefully designed with convenient easy-push-out sections for trunking & are made from flexible non-marking plastic so are not brittle like common backboxes. Quick & Easy Simple enough that even an inexperienced technician can install it. No soldering is necessary due to its captive screw connector design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want & swap it out. Plug-&-Play Connectivity Unlike cheap VGA cable, Vision’s quality cable has SDA & SCL data lines to support DDC2B (Display Data Channel) which allows the display device to communicate its supported display modes. Without these the user will not experience play-&-play connectivity & will have to manually setup resolution & color bit depth. Installation-Grade Cable When choosing cable don’t be fooled by a thick cable jacket. Does it have adequate copper? Is it shielded evenly to prevent ghosting? A major cost component of cables is copper, so cheap cables have less copper. Compromising can result in cable which doesn’t support high resolutions, & results in flagging or image jitter. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Plus Ferrite Cores included on VGA cables to eliminate radio-frequency induction noise.

...

The Techconnect range features an attractive architectural front surround system making it suitable for corporate & home-cinema applications, plus robust clip-in modules which make it super-quick to install & flexible. It allows seamless integration of connectivity, audio, & control. Plug-In Cables Modules feature plug-in connectors on the rear. Cables come pre-terminated with male connectors which are simply plugged into the rear of the module. Need to shorten or pull a cable? Just unscrew the captive-screw connector. Techconnect gives you the speed of a pre-terminated system with the flexibility you sometimes need. More Space By using multi-layer printed circuit boards we’ve created much more space behind each module for cables. The depth of the VGA module being just 38mm from the front of the module to the rear. Backboxes The Techconnect packages come with a surface-mounted ‘backbox’ & a ‘surround’ – the part the modules clip into. The range

Includes:: various flush & surface mounting backboxes, & all the surrounds conform to standard British sizes so they fit any locally sourced backboxes. Vision also offers Australian & American surrounds which conform to local standards. Backboxes are carefully designed with convenient easy-push-out sections for trunking & are made from flexible non-marking plastic so are not brittle like common backboxes. Quick & Easy Simple enough that even an inexperienced technician can install it. No soldering is necessary due to its captive screw connector design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want & swap it out. Plug-&-Play Connectivity Unlike cheap VGA cable, Vision’s quality cable has SDA & SCL data lines to support DDC2B (Display Data Channel) which allows the display device to communicate its supported display modes. Without these the user will not experience play-&-play connectivity & will have to manually setup resolution & color bit depth. Installation-Grade Cable When choosing cable don’t be fooled by a thick cable jacket. Does it have adequate copper? Is it shielded evenly to prevent ghosting? A major cost component of cables is copper, so cheap cables have less copper. Compromising can result in cable which doesn’t support high resolutions, & results in flagging or image jitter. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Plus Ferrite Cores included on VGA cables to eliminate radio-frequency induction noise.

...

Vision Techconnect Display Port adapter

Specification Type Display Port adapter Connector (s) 1 x Mini Display Port
-


...