AV-1700 front angle The Techaudio AV-1700 is compact, flexible, easy to use & is extremely efficient. Use as a standalone mixer & amp, or as a mixer which outputs to a bigger amp or powered loudspeakers. 4 x Stereo Inputs 4 stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 3 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 4 is via a 3.5mm minijack connector, & is duplicated on the front & rear panels for easy access. Line Output A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the AV-1700 affects the output level. Microphone Input It uses a professional XLR connector & the input is balanced to eliminate electro-magnetic noise induced on long cables. The microphone input has “ Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones. Remote Control The IR remote control gives the user bass & treble adjustment & direct input selection. The AV-1700 can be controlled by a control device such as Techconnect Control via IR or RS-232. Simple Interface The clear simple interface offers the user just two dials. Auto-Standby If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again. Mounting Options Optional mounting hardware is available which allows attachment to a wall, projector ceiling pole, or rack. Specifications AMPLIFIER DIMENSIONS: 220 x 154 x 44mm (wide x deep x tall) not including dials & connectors CARTON DIMENSIONS: 293 x 233 x 133mm AMPLIFIER WEIGHT: 1.2kg PACKAGED WEIGHT: 2.0kg

Colour: White INPUTS 4 x Stereo inputs (via 3 x phono connectors / 1 x 3.5mm minijack) 1 x Microphone inputs via balanced XLR OUTPUTS 1 x Stereo Line-level output via phono connectors TECHNICAL DETAILS 2 x 30w @ 8 ohms Total Harmonic Distortion <2% Frequency response (line in): 50 Hz~18k Hz Signal to noise ratio (line in): 75d B Rating input level/ Impedance: line in 440~500m V/47kohms Power consumption (rating condition): <=125W ACCESSORIES INCLUDED 1 x 2-phono to 2-phono cable 2m long 1 x 3.5mm to 3.5mm minijack cable 2m long 2 x Unshielded Speaker Cable 5m long 1 x UK C7 figure-8 power cable 1.8 m long 1 x EU C7 figure-8 power cable 1.8 m long 1 x AU C7 figure-8 power cable 1.8 m long 1 x US C7 figure-8 power cable 1.8 m long POWER SUPPLY: 100~240V Internal Power Supply

...

- Accommodates the Click Share presentation server & two Click Share buttons
- Plus the power supply.
- 270 x 220 x 70 mm.
-


...

The CS-1600 ceiling speakers feature a two-way design which gives full-bandwidth sound full of bass & clarity. The main driver is a 6.5& Prime; polypropylene cone complimented by a 1& Prime; ferro-fluid cooled silk tweeter. These low impedance speakers do no sacrifice frequency range in the way that 100/70v line speakers inherently do, & with the rear cabinet allowing full tuning of internal acoustics the bass is rich & deep without distortion. ...

Vision is the only true complete solution supplier with products ranging from Plasma Display Screens & Data / Video projectors to universal brackets & a wide variety of accessories. Vision has an enviable reputation for being able to move quickly & produce products that the market demands. ...

Designed for use in small meeting rooms & classrooms, the SP-1100P are Vision’s most cost-effective audio solution & represent fantastic value. Great sound quality & Vision’s trademark ease of installation are key features of this product. Digital The SP-1100P is assembled by a fully automated production line to ensure reliability, & uses a quality Yamaha class-D digital amplifier chip. Volume on Front The volume dial is on the front of the ‘master’ loudspeaker – the one containing the amplifier – so users can easily access it. Turning the volume dial fully anti-clockwise turns the power off (standby). Easy to Install Simple “C” brackets are included for swift installation. Flexible Connectivity The rear panel of the master loudspeaker offers minijack & 2-phono inputs. MDF Fabrication A sturdy MDF chassis provides a rigid acoustic chamber for distortion free sound, & the tuned bass reflex port enhances bass. Summed Inputs The two line-level inputs are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source & display devices in the system are powered from the same mains power source. Silk Tweeter A proven two-way design with good quality driver components ensures users will get reliable service for many years. Specifications PRODUCT DIMENSIONS: 150 x 145 x 220 mm (length x width x height for each speaker) PACKAGED DIMENSIONS: 368 x 318 x 193 mm PRODUCT WEIGHT: 3.4kg (per pair) PACKAGED WEIGHT: 5.0kg (per pair) CONSTRUCTION

Material: MDF

Colour: White TECHNICAL

Details: Amplifier Output: 2 x 10w watts (RMS) Woofer: 4& Prime; Tweeter: 1.5& Prime; Silk Input 1: Minijack (3.5mm) Input 2: 2-Phono (RCA) Speaker Output: Spring-loaded bare-wire type Speaker Input (on slave): Spring-loaded bare-wire type Output Impedance: 4 ohms Sensitivity: 85d B (1w/1m) Frequency response: 80 Hz-16k Hz ACCESSORIES INCLUDED: 2 x Wall brackets 1 x Euro Figure-8 Power cable 1.8m long 1 x UK Figure-8 Power cable 1.8m long 1 x AU Figure-8 Power cable 1.8m long 1 x 5m Speaker Cable POWER SUPPLY: 240V Internal Power Supply WARRANTY 2-year return to base





...

Features VISION Tech Connect cable raceway faceplate Product Type Cable raceway faceplate Gang Qty
- 2-gang ...

Manufacturer's Part Number: TC 15M3.5MM Product Description: VISION Techconnect
- audio cable
- 15 m Cable: Audio cable Length:

...

VISION TECHCONNECT SPARE 15M 2-PHONO AUDIO CABLE High-Grade White Installation Cable. A moulded connector on one end, & a male phoenix connector on the other end which can be plugged directly into the rear of a Techconnect faceplate module. 3 Year onsite warranty ...

The Techconnect is a modular family of products designed to suit any IT, AV, pro audio, office, or home cinema installation. It is simple enough that even a moderately experienced technician can easily install it, & it doesn't require soldering at all due to its phoenix connector captive screw design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want, & swap it out. ...

Use the remote control from your equipment to program the module in a few easy steps. The TECHCONNECT CONTROL2 features increased processing & memory power to cover a wider range of IR protocols. Once fully programmed, the codes from one CONTROL2 module can be duplicated to other Control 2 modules. ...