VISION AV-1000 Active Bookshelf Speakers. Vision’s new powered-speaker has a built-in analogue amplifier outputting 2 x 12w (RMS) for small training rooms & classrooms where a simple audio reinforcement system will do. 2-Way Bas Refle x A vented bass reflex design maximises the 4” main driver excursion allowing natural, full-range bass. IR Remote Control Powered speakers are often mounted high out of reach with inaccessible volume dials. The AV-1000 has a remote control included which offers separate bass & treble adjustment. 2 x Stereo Inputs Two flexible line-level inputs are positioned on the rear panel: 1 x 2-phono socket, & 1 x mini-jack socket. Various Volume Level Control Options With the AV-1000 you can have various ways of allowing volume adjustment: 1. Route audio through your projector & use the projector remote for volume control 2. Use the volume dial on the back of the master speaker 3. Use the remote control 4. Use the Techconnect 2 Control 2 which integrates control into your faceplate. Easy Fit, use as a standard Bookshelf speaker or wall mount with the included wall brackets allow quick one-man fitting & adjustment. The unique brackets allow the speakers to be pulled away from the wall & turned 90° which still being attached to the bracket providing easy access to the rear panels. ...

AV-1700 front angle The Techaudio AV-1700 is compact, flexible, easy to use & is extremely efficient. Use as a standalone mixer & amp, or as a mixer which outputs to a bigger amp or powered loudspeakers. 4 x Stereo Inputs 4 stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 3 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 4 is via a 3.5mm minijack connector, & is duplicated on the front & rear panels for easy access. Line Output A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the AV-1700 affects the output level. Microphone Input It uses a professional XLR connector & the input is balanced to eliminate electro-magnetic noise induced on long cables. The microphone input has “ Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones. Remote Control The IR remote control gives the user bass & treble adjustment & direct input selection. The AV-1700 can be controlled by a control device such as Techconnect Control via IR or RS-232. Simple Interface The clear simple interface offers the user just two dials. Auto-Standby If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again. Mounting Options Optional mounting hardware is available which allows attachment to a wall, projector ceiling pole, or rack. Specifications AMPLIFIER DIMENSIONS: 220 x 154 x 44mm (wide x deep x tall) not including dials & connectors CARTON DIMENSIONS: 293 x 233 x 133mm AMPLIFIER WEIGHT: 1.2kg PACKAGED WEIGHT: 2.0kg

Colour: White INPUTS 4 x Stereo inputs (via 3 x phono connectors / 1 x 3.5mm minijack) 1 x Microphone inputs via balanced XLR OUTPUTS 1 x Stereo Line-level output via phono connectors TECHNICAL DETAILS 2 x 30w @ 8 ohms Total Harmonic Distortion <2% Frequency response (line in): 50 Hz~18k Hz Signal to noise ratio (line in): 75d B Rating input level/ Impedance: line in 440~500m V/47kohms Power consumption (rating condition): <=125W ACCESSORIES INCLUDED 1 x 2-phono to 2-phono cable 2m long 1 x 3.5mm to 3.5mm minijack cable 2m long 2 x Unshielded Speaker Cable 5m long 1 x UK C7 figure-8 power cable 1.8 m long 1 x EU C7 figure-8 power cable 1.8 m long 1 x AU C7 figure-8 power cable 1.8 m long 1 x US C7 figure-8 power cable 1.8 m long POWER SUPPLY: 100~240V Internal Power Supply

...

- Accommodates the Click Share presentation server & two Click Share buttons
- Plus the power supply.
- 270 x 220 x 70 mm.
-


...

The CS-1600 ceiling speakers feature a two-way design which gives full-bandwidth sound full of bass & clarity. The main driver is a 6.5& Prime; polypropylene cone complimented by a 1& Prime; ferro-fluid cooled silk tweeter. These low impedance speakers do no sacrifice frequency range in the way that 100/70v line speakers inherently do, & with the rear cabinet allowing full tuning of internal acoustics the bass is rich & deep without distortion. ...

Vision is the only true complete solution supplier with products ranging from Plasma Display Screens & Data / Video projectors to universal brackets & a wide variety of accessories. Vision has an enviable reputation for being able to move quickly & produce products that the market demands. ...

New to the Vision range are the new SP-1300 loudspeakers, designed to compliment the AV & C range of Vision audio amplifiers. Optimized for presentations, these high-quality speakers output clear, intelligible audio with a wide dispersion to cover wide areas. Achieve high sound pressure levels with clarity. ...

Features VISION Tech Connect cable raceway faceplate Product Type Cable raceway faceplate Gang Qty
- 2-gang ...

Manufacturer's Part Number: TC 15M3.5MM Product Description: VISION Techconnect
- audio cable
- 15 m Cable: Audio cable Length:

...

VISION TECHCONNECT SPARE 15M 2-PHONO AUDIO CABLE High-Grade White Installation Cable. A moulded connector on one end, & a male phoenix connector on the other end which can be plugged directly into the rear of a Techconnect faceplate module. 3 Year onsite warranty ...

The Techconnect is a modular family of products designed to suit any IT, AV, pro audio, office, or home cinema installation. It is simple enough that even a moderately experienced technician can easily install it, & it doesn't require soldering at all due to its phoenix connector captive screw design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want, & swap it out. ...