Developed to meet the demands of modern gravel bike riding, the SRAM XPLR XG1271 Cassette features a 440% range & X-Range gearing for smooth & dependable performance wherever your adventure takes you. ...

SRAM XX 10 Speed (2x 10) BB30 Chainset: Coming in at 694 grams (BB30), the XX Crank delivers amazing performance & durability with no penaties in weight. The first MTB crank specifically designed for 2x 10 uses some of the worlds most advanced material science. The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) & a two-piece insert-molded carbon composite construction. The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, & beveled crank arms to maximize clearance. Its pure science in action. XX Chainrings: The concept was simple: create a geometry that allows each chainring to be divided into equal segments, much like a pie. Then, perfect the up & downshift timing for one segment & repeat that for each of them. However, making this idea an engineering reality was quite another thing. Prototype after prototype was built, ridden & analysed until we got it right. The outcome is lightning-fast & accurate front shifting, through an all-new, patented, mind-blowingperformance technology: X-Glide. X-Glide: What Makes it so fast? Traditional chainring geometry forces a compromise between up & down shift locations, none of which have ideal timing. In fact, half of the possible locations are skipped on each crank revolution. The more shift locations you try to incorporate, the worse the timing compromise will be: either your chain jams, causing chain suck, or the chain just fails to shift & runs across the top of the rings until it hits the next shift location. Those days are over with X-Glide. X-Glide is the common denominator that gives XX its unmatched shifting performance. With the X-Glide, all four upshift locations are identical & can be picked up by any outer link. The result? Up & down shift locations have perfect timing for an almost instant shift
- even under load! This all new shifting experience is enhanced by the XX Front Derailleur & the XX 2x 10 Front Shifter. Designed together to work together. Speed: 2x 10 Bearings not included Weight: 694g (BB30) Chainline: 49.5 Chainring

Material: Al-7075-T651 Chainring

Colour: Tungsten grey & silver Chainring bolts: Al-7075-T6 Crank-arm

Materials: Integrated carbon composite/aluminium spider construction Compatibilty chain: Optimised for SRAM PC 1090 or PC 1090R Crank arm length options: 170mm & 175mm Chainring options: 26-39 (120/80 BCD), 28-42 (120/80 BCD) Bottom Bracket options: GXP, Press Fit GXP, BB30, & Press Fit 30 (Black Box Ceramic Bearings standard on all BB options







...

The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness
...

SRAM XX 10 Speed (2x 10) Front Derailleur -Direct Mount: The low-profile XX front derailleur was designed from scratch specifically for 2x 10. Its a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount & direct mount options. X-Glide technology incorporated into the chainrings & front derailleur means that front shifting has never been this crisp. By maximising the number of perfectly aligned points between the large & the small chainrings, X-Glide shifts when you shift. Please note: XX™ demands precise Frame Fit Specifications that are unique to XX. These specifications are the result of the innovative & revolutionary technology that makes XX shifting the lightest, fastest, & most precise in the mountain bike market today. Please take the time to carefully review the frame fit specifications to ensure you have the information you need to build the perfect XX equipped mountain bike. SRAM didnt compromise when developing the XX group; they know you wont either. Please refer to the link provided on SRAMs website regarding the Frame Fit

Specification so to help you correctly order the right front mech for your machine: Frame Fit Specifications (pdf file) Weight: 116g Cage

Material: Steel Technologies: Supports X-Glide & Exact Actuation ratio Clamp

Material: Forged AL 6061-T6 Hardware: TORX T25 bolts Shifting positions: 2 Cable routing: Top or Bottom pull Chainstay angle: 66-69 degrees Compatibility: 31.8mm, 34.9mm & 38.1mm Options: Direct Mount (bottom or top pull)





...

It's a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount & direct mount options. X-Glide technology incorporated into the chainrings & front derailleur means that front shifting has never been this crisp. By maximising the number of perfectly aligned points between the large & the small chainrings, X-Glide shifts when you shift. ...

SRAM XX 10 Speed (2x 10) Front Derailleur -Low Clamp: The low-profile XX front derailleur was designed from scratch specifically for 2x 10. Its a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount & direct mount options. Weight: 118g Cage

Material: Steel Technologies: Supports X-Glide & Exact Actuation ratio Clamp

Material: Forged AL 6061-T6 Hardware: TORX T25 bolts Shifting positions: 2 Cable routing: Top or Bottom pull Chainstay angle: 66-69 degrees Compatibility: 31.8mm, 34.9mm & 38.1mm Options: High Mount & Direct Mount (seperate pages)



...

SRAM XX 10 Speed (2x 10) GXP Chainset: Coming in at 754 grams (GXP w/bottom bracket), the XX Crank delivers amazing performance & durability with no penaties in weight. The first MTB crank specifically designed for 2x 10 uses some of the worlds most advanced material science. The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) & a two-piece insert-molded carbon composite construction. The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, & beveled crank arms to maximize clearance. Its pure science in action. XX Chainrings: The concept was simple: create a geometry that allows each chainring to be divided into equal segments, much like a pie. Then, perfect the up & downshift timing for one segment & repeat that for each of them. However, making this idea an engineering reality was quite another thing. Prototype after prototype was built, ridden & analysed until we got it right. The outcome is lightning-fast & accurate front shifting, through an all-new, patented, mind-blowingperformance technology: X-Glide. X-Glide: What Makes it so fast? Traditional chainring geometry forces a compromise between up & down shift locations, none of which have ideal timing. In fact, half of the possible locations are skipped on each crank revolution. The more shift locations you try to incorporate, the worse the timing compromise will be: either your chain jams, causing chain suck, or the chain just fails to shift & runs across the top of the rings until it hits the next shift location. Those days are over with X-Glide. X-Glide is the common denominator that gives XX its unmatched shifting performance. With the X-Glide, all four upshift locations are identical & can be picked up by any outer link. The result? Up & down shift locations have perfect timing for an almost instant shift
- even under load! This all new shifting experience is enhanced by the XX Front Derailleur & the XX 2x 10 Front Shifter. Designed together to work together. Speed: 2x 10 GXP cups not included Weight: 754g (GXP w/bottom bracket) Chainline: 49.5 Chainring

Material: Al-7075-T651 Chainring

Colour: Tungsten grey & silver Chainring bolts: Al-7075-T6 Crank-arm

Materials: Integrated carbon composite/aluminium spider construction Compatibilty chain: Optimised for SRAM PC 1090 or PC 1090R Crank arm length options: 170mm & 175mm Chainring options: 26-39 (120/80 BCD), 28-42 (120/80 BCD) Bottom Bracket options: GXP, Press Fit GXP, BB30, & Press Fit 30 (Black Box Ceramic Bearings standard on all BB options







...

The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness
...

SRAM XX 10 Speed (2x 10) Rear Derailleur: Leveraging the legendary history of SRAM shifting, the XX rear derailleur delivers incrediable speed & precision. Sealed ceramic pulleys give you the highest levels of durability. The carbon fibre cage has a dedicated length specific to 2x 10. Exact Actuation technology eliminates slop & shifting variation. Its rear derailleur perfected for ultimate off-road performance. Weight: 181g Speeds: 10 speed for 2x 10 Technology: Exact Actuation ratio, Direct Route Technology Inner/ Outer Cage

Material: Carbon fibre composite Spring

Material: Titanium Inner Link: Forged magnesium Outer Link: Forged AL6061-T6 Bearing Pulleys: Sealed ceramic Hardware: Titanium & AL7075-T6 Cage Length: 93mm Compatibility: 36 tooth



...

Sealed ceramic pulleys give you the highest levels of durability. The carbon fibre cage has a dedicated length specific to 2x 10. Exact Actuation technology eliminates slop & shifting variation. Its rear derailleur perfected for ultimate off-road performance. ...