Offering a fantastic 440% range for gravel riding & X-Range gearing, the SRAM XPLR XG1251 Cassette gives you more range & a smoother gear progression, so you're always in the right gear. ...

This high-quality 12 speed cassette is ideal for gravel riding as it comes fully equipped with some of the finest technologies available from SRAM for maximum performance on your travels. Ready for exploring countryside backroads with mixed terrain conditions, this model is kitted out with a wide 440% range, which makes gravel mountain climbs less daunting while its tight jumps between its higher cogs allow you to get the power down when accelerating on the asphalt. Specifically designed for use with SRAM XPLR 1x rear derailleurs, each cog has shift features that are optimised for electronic shifting. This means that riders will enjoy electronic benefits such as faster, smoother & more accurate shifts, so you're always in the right gear. X-Range Optimised 12 Speed Cassette Due to today's drop bar bikes being faster & more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. By starting X-Range cassettes with a 10T cog, SRAM is able to keep the cogs & chainrings smaller overall, eliminating the potential weight gain of a wide-range 11-tooth start drivetrain. It's the best way to expand the range & keep small jumps between cogs. X-Range achieves wider range & tighter jumps by going to a 12-speed cassette, but also by moving some of the gear range from the front of the drivetrain to the back. That means you can stay on the same ring longer, requiring fewer front shifts, which are inherently less efficient than rear shifts. & when a front shift is executed, the smaller jump is smoother & means that you can get to the right cadence with fewer compensation shifts in the rear. Fewer, faster front shifts make it easier for you to find the right gear, & that’s a distinct performance advantage relative to traditional drivetrains. 440% Range for Gravel Riding Make that daily ride from your front door a little spicier with some dirt. The 440% range of the XPLR XG-1271 cassette provides smooth gear progression when you’re sweating up gravel climbs, & tight jumps on the high end for when it’s time to drill it on asphalt. Shift features on each cog are optimised for electronic shifting, so you’ll get fast, smooth & precise shifts every time.
- X-Range gearing gives you more range & a smoother gear progression, so you’re always in the right gear
- 440% range gives the coverage 1x gravel riders want
- For use with XPLR 1x rear derailleurs
- Compatible with Flattop chains
- Compatible with XDR driver body
- All Zipp wheels starting from 2015 are XDR ready
- Mini Cluster technology with aluminium large cog for light weight & durability Manufacturer's Part Number: 00.2418.118.000






...

Developed to meet the demands of modern gravel bike riding, the SRAM XPLR XG1271 Cassette features a 440% range & X-Range gearing for smooth & dependable performance wherever your adventure takes you. ...

SRAM XX 10 Speed (2x 10) BB30 Chainset: Coming in at 694 grams (BB30), the XX Crank delivers amazing performance & durability with no penaties in weight. The first MTB crank specifically designed for 2x 10 uses some of the worlds most advanced material science. The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) & a two-piece insert-molded carbon composite construction. The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, & beveled crank arms to maximize clearance. Its pure science in action. XX Chainrings: The concept was simple: create a geometry that allows each chainring to be divided into equal segments, much like a pie. Then, perfect the up & downshift timing for one segment & repeat that for each of them. However, making this idea an engineering reality was quite another thing. Prototype after prototype was built, ridden & analysed until we got it right. The outcome is lightning-fast & accurate front shifting, through an all-new, patented, mind-blowingperformance technology: X-Glide. X-Glide: What Makes it so fast? Traditional chainring geometry forces a compromise between up & down shift locations, none of which have ideal timing. In fact, half of the possible locations are skipped on each crank revolution. The more shift locations you try to incorporate, the worse the timing compromise will be: either your chain jams, causing chain suck, or the chain just fails to shift & runs across the top of the rings until it hits the next shift location. Those days are over with X-Glide. X-Glide is the common denominator that gives XX its unmatched shifting performance. With the X-Glide, all four upshift locations are identical & can be picked up by any outer link. The result? Up & down shift locations have perfect timing for an almost instant shift
- even under load! This all new shifting experience is enhanced by the XX Front Derailleur & the XX 2x 10 Front Shifter. Designed together to work together. Speed: 2x 10 Bearings not included Weight: 694g (BB30) Chainline: 49.5 Chainring

Material: Al-7075-T651 Chainring

Colour: Tungsten grey & silver Chainring bolts: Al-7075-T6 Crank-arm

Materials: Integrated carbon composite/aluminium spider construction Compatibilty chain: Optimised for SRAM PC 1090 or PC 1090R Crank arm length options: 170mm & 175mm Chainring options: 26-39 (120/80 BCD), 28-42 (120/80 BCD) Bottom Bracket options: GXP, Press Fit GXP, BB30, & Press Fit 30 (Black Box Ceramic Bearings standard on all BB options







...

The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness
...

It's a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount & direct mount options. X-Glide technology incorporated into the chainrings & front derailleur means that front shifting has never been this crisp. By maximising the number of perfectly aligned points between the large & the small chainrings, X-Glide shifts when you shift. ...

SRAM XX 10 Speed (2x 10) Front Derailleur -High Clamp: The low-profile XX front derailleur was designed from scratch specifically for 2x 10. Its a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount & direct mount options. Weight: 120g Cage

Material: Steel Technologies: Supports X-Glide & Exact Actuation ratio Clamp

Material: Forged AL 6061-T6 Hardware: TORX T25 bolts Shifting positions: 2 Cable routing: Top or Bottom pull Chainstay angle: 66-69 degrees Compatibility: 31.8mm, 34.9mm & 38.1mm Options: Low Mount & Direct Mount (seperate pages)



...

SRAM XX 10 Speed (2x 10) Front Derailleur -Low Clamp: The low-profile XX front derailleur was designed from scratch specifically for 2x 10. Its a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount & direct mount options. Weight: 118g Cage

Material: Steel Technologies: Supports X-Glide & Exact Actuation ratio Clamp

Material: Forged AL 6061-T6 Hardware: TORX T25 bolts Shifting positions: 2 Cable routing: Top or Bottom pull Chainstay angle: 66-69 degrees Compatibility: 31.8mm, 34.9mm & 38.1mm Options: High Mount & Direct Mount (seperate pages)



...

SRAM XX 10 Speed (2x 10) GXP Chainset: Coming in at 754 grams (GXP w/bottom bracket), the XX Crank delivers amazing performance & durability with no penaties in weight. The first MTB crank specifically designed for 2x 10 uses some of the worlds most advanced material science. The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) & a two-piece insert-molded carbon composite construction. The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, & beveled crank arms to maximize clearance. Its pure science in action. XX Chainrings: The concept was simple: create a geometry that allows each chainring to be divided into equal segments, much like a pie. Then, perfect the up & downshift timing for one segment & repeat that for each of them. However, making this idea an engineering reality was quite another thing. Prototype after prototype was built, ridden & analysed until we got it right. The outcome is lightning-fast & accurate front shifting, through an all-new, patented, mind-blowingperformance technology: X-Glide. X-Glide: What Makes it so fast? Traditional chainring geometry forces a compromise between up & down shift locations, none of which have ideal timing. In fact, half of the possible locations are skipped on each crank revolution. The more shift locations you try to incorporate, the worse the timing compromise will be: either your chain jams, causing chain suck, or the chain just fails to shift & runs across the top of the rings until it hits the next shift location. Those days are over with X-Glide. X-Glide is the common denominator that gives XX its unmatched shifting performance. With the X-Glide, all four upshift locations are identical & can be picked up by any outer link. The result? Up & down shift locations have perfect timing for an almost instant shift
- even under load! This all new shifting experience is enhanced by the XX Front Derailleur & the XX 2x 10 Front Shifter. Designed together to work together. Speed: 2x 10 GXP cups not included Weight: 754g (GXP w/bottom bracket) Chainline: 49.5 Chainring

Material: Al-7075-T651 Chainring

Colour: Tungsten grey & silver Chainring bolts: Al-7075-T6 Crank-arm

Materials: Integrated carbon composite/aluminium spider construction Compatibilty chain: Optimised for SRAM PC 1090 or PC 1090R Crank arm length options: 170mm & 175mm Chainring options: 26-39 (120/80 BCD), 28-42 (120/80 BCD) Bottom Bracket options: GXP, Press Fit GXP, BB30, & Press Fit 30 (Black Box Ceramic Bearings standard on all BB options







...

The oversized chainrings are CNC machined from 6mm 7075 aluminium blanks
- 2mm thicker than the competition. Unparalleled stiffness
...