Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 20 Metre Yellow UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

5m White CAT6A Ethernet Cable Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

The CT-500 RJ45 patch cable tester can be used to check wiring pinouts on RJ45 patch cables or for testing wall ports & patch panel wiring in structured buildings using the included remote unit. Please note that this tester is only a continuity tester & does not test a cable or installation for speed it is not recommend that either of the units are attached to a live network. The CT-500 comes with local & remote unit 9v battery & a carry case. Specification: Continuity tester for RJ45 (8P8C) UTP or STP Patch Cables Easy to read LED Display Supplied with Remote unit for testing installed wall ports Adjustable speed settings Maximum test length of up to 1000 ft (305 Mtrs) Supplied with 9 Volt Battery & carry case ...

Our range of NEWlink Omni-directional antenna boosts the signal strength & operational range of wireless products. For the antenna to attach to a wireless device the device must have a Reverse SMA or TNC Connector. The NLWL-BASETNC can connect to wireless PCI cards & wireless routers as long as the item that our product is being attached to has the reverse SMA or TNC connector.

Specification Extends Operational Range & Boosts Signal Quality. Compatible with all IEEE 802.11b & IEEE 802.11g Wireless Access Points Routers & PCI Host Cards that are fitted with a Reverse SMA or TNC Connector. Quick & Easy Installation.

...

The Newlink 2 way HDMI splitter allows one input to be split into 2 identical outputs. The splitter supports HDMI v 2 has the bandwidth to run two displays at resolutions up to 4k@60 Hz & also supports HDCP 2.2. The splitters have 3.5mm stereo output for local speakers etc to avoid multiple audio outputs from TVs or Displays. Both versions have metal housing making them very sturdy. Rubber feet provide an anti-slip functionality. Specification: HDMI V2 Splitter 4k@60 Hz Additional 3.5mm Stereo output 1 HDMI Input 2 HDMI outputs plus 1x 3.5mm output. Supports HDCP 2.2 Max Recommended Cable Lengths: 3mtr in 5mtr out (could be longer with active or fibre cables) Contents 2 Port HDMI Splitter 5v 1A Power Supply ...

White LED light up 1m HDMI cable with nylon over braiding lit connectors high speed with ethernet latest

Specification

...

5m single mode 9/125um OS2 fibre cable LC to ST connectors ideal for high speed network connections. Fibre cables have a much higher bandwidth the normal ethernet cables ideal to be used in telecom installations server rooms etc

Specification LC to ST Connectors 9µm core 125µm cladding Low smoke zero halogen Duplex support Bend radius: 40mm Operating temperature: -60 to +85° Supports 1 Gbps Overall diameter: 3mm 5 meter

...

PCI Express graphics card power cable with two molex 4 pin connectors. Please note that there are two types of PCI-e 6 pin connectors our connector has a square pin 5 (see pic) Specification: Twin 4 Pin Molex to PCI-e Power 2 x 4 Pin Male Molex 20cm 18awg ...

The 3XLR-MFRCA is an RCA to 3 Pin XLR adapter. With a female RCA connector on one side & a male 3 Pin XLR connector on the other it is ideal for converting a male RCA connection into a male XLR connection or a female XLR connection into a female RCA connection. The pins are gold-plated for a higher quality connection while also providing anti-corrosion properties. 3 Pin XLR male RCA female Gold plated pins ...

Nylon braided 5m HDMI cable with red LED light up connectors high speed with ethernet latest

Specification for pixel

...