Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 10 Metre Yellow UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 2 Metre Yellow UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 5 Metre Yellow UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

1.5m White CAT6A Ethernet Cable Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

3m White CAT6A Ethernet Cable Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

Ideal for splitting a network connection to multiple devcies it provides you with a high-performance seamless low-cost & easy-to-use 10/100 Mbps network. All eight ports support auto-negotiation & auto-MDI/MDIX eliminating the need for a cross over cables. The switch is compatible with any 10/100 Mbps Ethernet device. Connection speeds are automatically detected. The 8 Port desktop switch is compatible with any 10/100 Mbps Ethernet device. The latest innovative energy-efficient technologies are implemented making this switch an eco-friendly solution for your home or office network saving you up to 75% of the power consumption.

Specification Complies with IEEE 802.3 & IEEE 802.3u standards Eight Auto-Negotiation ports provide smart switching between 10 Mbps & 100 Mbps hardware Supports Auto-MDI/MDIX eliminating the need for crossover cables Supports IEEE 802.3x flow control for Full Duplex mode & backpressure for Half Duplex mode Supports MAC address auto-learning & auto-aging Fanless design ensures quiet operation without disturbing your family Plug & Play design simplifies installation

...

The 8 port Ethernet switch is an ideal choice to create a 10/100 network. It provides you with a high-performance seamless low-cost & easy-to-use 10/100 Mbps network. All eight ports support auto-negotiation & auto-MDI/MDIX eliminating the need for a cross over cables. Connection speeds are automatically detected. The 8 Port desktop switch is compatible with any 10/100 Mbps Ethernet device. The latest innovative energy-efficient technologies are implemented making this switch an eco-friendly solution for your home or office network saving you up to 75% of the power consumption.

Specification Complies with IEEE 802.3 IEEE 802.3u & IEEE 802.3ab standards Eight Auto-Negotiation ports provide smart switching between 10 Mbps & 100 Mbps hardware Supports Auto-MDI/MDIX eliminating the need for crossover cables Supports IEEE 802.3x flow control for Full Duplex mode & backpressure for Half Duplex mode Supports MAC address auto-learning & auto-aging Non-blocking switching architecture enables full wire-speed packets forwarding & filtering Fanless design ensures quiet operation without disturbing your family Plug & Play design simplifies installation LED indicators for monitoring power link & activity

...

Newlink HDMI v 2.0 & USB (Universal Serial Bus) KVM Switch 4 Port Control 4 computers using a single keyboard & monitor & switch between them. Features One USB (Universal Serial Bus) console controls 2 or 4 HDMI interface computers Switch Mode: a. Push button b. Mouse switch c. Keyboard Hotkey switch Supports 4096 x 2160p @ 60 Hz OS Support: Windows 10 7 & Mac OS Plug & Play Supports HDCP & auto EDID Auto switch if one computer is unpowered Supports Auto scan function KVM switches allow you to control multiple computers from one set of keyboard video monitor & mouse. The KVM supports USB (Universal Serial Bus) mice keyboards & HDMI displays. It is available with one or two ports. Simple to set up whether using 2 or 4
computers. 

• Connect computers to USB (Universal Serial Bus) ports with a
 USB (Universal Serial Bus) type A to type B cable to the KVM. 
• Connect HDMI cables to the displays and
 KVM. 
• Connect USB (Universal Serial Bus) keyboard & mouse to the 
relevant ports on the back of KVM.
 • The front USB (Universal Serial Bus) port can be used for other
 USB (Universal Serial Bus) devices.

 You can switch between computer via buttons 
keyboard hotkeys or autoscan. Please note: Cables are not included. ...

The Combo wet & dry screen cleaner is double sided the dry side is equipped with a brush which is made from a micro-fine material the wet side is made with a high-quality cleaning wipe which is used with the supplied cleaning solution. Usage Use the dry-cleaner side first to remove dust from the screens surface. Apply 3 to 5 drops of cleaning solution on the wipe of the wet cleaner. Use the wet-cleaner to remove the dirt & micro-contaminants from the screens surface. Caution 1. Don’t use this product to clean food or any food container.2. Don’t apply the cleaning solution to the human body.3. Keep out of reach of children.4. Wash your hands with fresh water after use.5. Not to be used internally avoid contact with eyes. Contents 1 x Double Sided Brush 1 x Pack of cleaning wipes 1 x Cleaning fluid ...

White LED light up 3m HDMI cable with nylon over braiding lit connectors high speed with ethernet latest

Specification

...