More From Contributor

£188.79
VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n N/A\n\n\n Wireless Protocols\n IEEE 802.11ac\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114199\n\n\n Model Number\n V2865-K\n\n\n GTIN\n 4710484741257\n\n\n\n


...
Available
£188.79
VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n N/A\n\n\n Wireless Protocols\n IEEE 802.11ac\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114199\n\n\n Model Number\n V2865-K\n\n\n GTIN\n 4710484741257\n\n\n\n


...
Available
£188.79
VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n N/A\n\n\n Wireless Protocols\n IEEE 802.11ac\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114199\n\n\n Model Number\n V2865-K\n\n\n GTIN\n 4710484741257\n\n\n\n


...
Available
£249.83
For an enhanced alternative of the V2865AC-K please take a look at:\n Dray Tek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\n VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n With 802.11ac wireless on 'ac' models, it provides fast wireless coverage to your network's computers & devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections & nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\n AC1300 Wireless LAN with Mesh\n The 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n With firmware 4.3.0, the Vigor 2865 'ac' wireless routers can be used as part of Dray Tek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access & management of Mesh Vigor A Ps directly.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n 2\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114196\n\n\n Model Number\n V2865AC-K\n\n\n GTIN\n 4710484741240\n\n\n\n


...
Available
£249.83
For an enhanced alternative of the V2865AC-K please take a look at:\n Dray Tek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\n VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n With 802.11ac wireless on 'ac' models, it provides fast wireless coverage to your network's computers & devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections & nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\n AC1300 Wireless LAN with Mesh\n The 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n With firmware 4.3.0, the Vigor 2865 'ac' wireless routers can be used as part of Dray Tek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access & management of Mesh Vigor A Ps directly.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n 2\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114196\n\n\n Model Number\n V2865AC-K\n\n\n GTIN\n 4710484741240\n\n\n\n


...
Available
£270.32
\n Draytek V2865VAC wireless router Gigabit Ethernet Dual-band (2.4 GHz / 5 GHz) 5G Grey\n \n \n \n \n \n \n Manufacturer:\n Draytek\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Wireless Routers\n \n \n SKU:\n V2865VAC-K\n \n \n EAN:\n 4710484743206\n \n \n \n \n \n Description\n \n \n The Ideal DSL Router with VPN for Small Business & Remote Working\n Dray Tek&153;s Vigor 2865 series Multi-WAN Firewall VPN routers are ideal for Superfast VDSL Broadband & Ethernet-based FTTP Fibre Broadb&. With Gigabit throughput, Quality of Service, VPN client/server, comprehensive Firewall & Content Filtering controls.\n\n Wi-Fi is available on &152;ac&153; models & the integrated 4G+ LTE modem on &152; Lac&153; models takes full advantage of mobile broadb&. The Vigor 2865 series provides a reliable, flexible, & secure networking solution, that&153;s ideal for Home Offices, Small Business & Satellite Offices.\n\n VDSL & Ethernet Load Balancer\n Connect the Vigor 2865 to Superfast Fibre with the integrated VDSL modem. Use the Ethernet WAN with Cable & Ultrafast FTTP. Load Balance multiple connections to boost performance.\n\n Benefits: Fully utilise Fibre Broadb&. High performance DSL & Gigabit CPE with flexible application.\n\n Integrated Vo IP Telephone Ports\n Connect 2 analogue phones to Vo IP with the ' Vac' model. Great Vo IP features such as auto Vo IP Qo S & configurable SIP ALG improve the reliability & quality of Vo IP calls.\n\n Benefits: All in one solution for Internet & Phone service. Great Vo IP features.\n\n Packed With Features\n Take advantage of Dray Tek&153;s rich feature set & useful functionality such as Quality of Service, Route Policy, Hotspot Web Portal, VPN Matcher, Dray DDNS & more.\n\n Benefits: Advanced Dray Tek router functionality solves many complex networking issues.\n\n Robust SMB VPN Router\n Quickly & securely connect remote sites with up to 32 VPN tunnels. Enable remote workers to access resources with Dray Tek SSL VPN & Open VPN support.\n\n Benefits: Securely encrypt network access for remote workers & working from home.\n\n 5+1 Gigabit LAN Ports with VLANs\n Link Server, Computers, & Network Attached Storage directly, with up to 6 Gigabit LAN ports. VLANs allow for as many as 8 separate networks, with options for Hotspot Captive Portal.\n\n Benefits: Improve quality of service for private & guest data traffic. Connect more devices.\n\n Vigor ACS Central Management\n The Vigor 2865 can be fully managed & configured remotely with the Vigor ACS central management platform. Manage Dray Tek networks spanning multiple sites.\n\n Benefits: Save time & money. Provision, manage & monitor remote sites easily, without on-site IT or dedicated staff.\n \n \n \n Specifications\n \n Ethernet LAN features Ethernet WANYes Ethernet LAN interface type Gigabit Ethernet Ethernet LANYes DSL features DSL WANYes ADSLYes ADSL2 Yes ADSL2+ Yes VDSLYes VDSL2 Yes Mobile network SIM card slot No Mobile network generation 5GNetwork Network address translation (NAT) Yes Ethernet LAN interface type Gigabit Ethernet Ethernet LANYes Load balancing system Yes Dynamic DNS (DDNS) Yes Packaging content Quick start guide Yes AC adapter included Yes Screws included Yes WAN connection Ethernet WANYes DSL WANYes SIM card slot No Wireless LAN features Top Wi-Fi standard Wi-Fi 5 (802.11ac)WLAN data transfer rate (max)866 Mbit/s Wi-Fi band Dual-band (2.4 GHz / 5 GHz)WLAN data transfer rate (first band)866 Mbit/s WLAN data transfer rate (second band)400 Mbit/s Wi-Fi standards 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) Ports & interfaces USB port Yes USB 2.0 ports quantity 2RJ-11 ports quantity 1 Ethernet LAN (RJ-45) ports 6 Management features Web-based management Yes Quality of Service (Qo S) support Yes Security Network address translation (NAT) Yes NAT functionality 100 Mb/s Max Sync Rate with VDSL2\n 300 Mb/s Max Sync Rate with VDSL2 35b\n 950 Mb/s NAT Throughput for Ethernet WAN with Hardware Acceleration\n 1.3 Gb/s Total Mult-WAN NAT Throughput\n 800 Mb/s NAT Throughput per WAN without Hardware Acceleration\n 60, 000 NAT Sessions\n 8000 Hardware Accelerated NAT Sessions Firewall Yes Access Control List (ACL) Yes Protocols DHCP server Yes Design Product type Tabletop router Wall mountable Yes On/off switch Yes LED indicators DSLProduct colour Grey Antenna Detachable antenna (s) Yes Antennas quantity 2 Antenna type External Antenna gain level (max)4 d Bi Power Power supply 24 WPower source type ACOutput voltage 12 VAC input voltage 220
- 240 VOperational conditions Storage temperature (T-T)-25
- 70 &176;COperating temperature (T-T)0
- 45 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 241 mm Height 44 mm Depth 165 mm Packaging data Quick start guide Yes AC adapter included Yes Screws included Yes Antenna included Yes\n \n \n\n\n\n\n\n\n\n



...
Available
£270.32
\n Draytek V2865VAC wireless router Gigabit Ethernet Dual-band (2.4 GHz / 5 GHz) 5G Grey\n \n \n \n \n \n \n Manufacturer:\n Draytek\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Wireless Routers\n \n \n SKU:\n V2865VAC-K\n \n \n EAN:\n 4710484743206\n \n \n \n \n \n Description\n \n \n The Ideal DSL Router with VPN for Small Business & Remote Working\n Dray Tek&153;s Vigor 2865 series Multi-WAN Firewall VPN routers are ideal for Superfast VDSL Broadband & Ethernet-based FTTP Fibre Broadb&. With Gigabit throughput, Quality of Service, VPN client/server, comprehensive Firewall & Content Filtering controls.\n\n Wi-Fi is available on &152;ac&153; models & the integrated 4G+ LTE modem on &152; Lac&153; models takes full advantage of mobile broadb&. The Vigor 2865 series provides a reliable, flexible, & secure networking solution, that&153;s ideal for Home Offices, Small Business & Satellite Offices.\n\n VDSL & Ethernet Load Balancer\n Connect the Vigor 2865 to Superfast Fibre with the integrated VDSL modem. Use the Ethernet WAN with Cable & Ultrafast FTTP. Load Balance multiple connections to boost performance.\n\n Benefits: Fully utilise Fibre Broadb&. High performance DSL & Gigabit CPE with flexible application.\n\n Integrated Vo IP Telephone Ports\n Connect 2 analogue phones to Vo IP with the ' Vac' model. Great Vo IP features such as auto Vo IP Qo S & configurable SIP ALG improve the reliability & quality of Vo IP calls.\n\n Benefits: All in one solution for Internet & Phone service. Great Vo IP features.\n\n Packed With Features\n Take advantage of Dray Tek&153;s rich feature set & useful functionality such as Quality of Service, Route Policy, Hotspot Web Portal, VPN Matcher, Dray DDNS & more.\n\n Benefits: Advanced Dray Tek router functionality solves many complex networking issues.\n\n Robust SMB VPN Router\n Quickly & securely connect remote sites with up to 32 VPN tunnels. Enable remote workers to access resources with Dray Tek SSL VPN & Open VPN support.\n\n Benefits: Securely encrypt network access for remote workers & working from home.\n\n 5+1 Gigabit LAN Ports with VLANs\n Link Server, Computers, & Network Attached Storage directly, with up to 6 Gigabit LAN ports. VLANs allow for as many as 8 separate networks, with options for Hotspot Captive Portal.\n\n Benefits: Improve quality of service for private & guest data traffic. Connect more devices.\n\n Vigor ACS Central Management\n The Vigor 2865 can be fully managed & configured remotely with the Vigor ACS central management platform. Manage Dray Tek networks spanning multiple sites.\n\n Benefits: Save time & money. Provision, manage & monitor remote sites easily, without on-site IT or dedicated staff.\n \n \n \n Specifications\n \n Ethernet LAN features Ethernet WANYes Ethernet LAN interface type Gigabit Ethernet Ethernet LANYes DSL features DSL WANYes ADSLYes ADSL2 Yes ADSL2+ Yes VDSLYes VDSL2 Yes Mobile network SIM card slot No Mobile network generation 5GNetwork Network address translation (NAT) Yes Ethernet LAN interface type Gigabit Ethernet Ethernet LANYes Load balancing system Yes Dynamic DNS (DDNS) Yes Packaging content Quick start guide Yes AC adapter included Yes Screws included Yes WAN connection Ethernet WANYes DSL WANYes SIM card slot No Wireless LAN features Top Wi-Fi standard Wi-Fi 5 (802.11ac)WLAN data transfer rate (max)866 Mbit/s Wi-Fi band Dual-band (2.4 GHz / 5 GHz)WLAN data transfer rate (first band)866 Mbit/s WLAN data transfer rate (second band)400 Mbit/s Wi-Fi standards 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) Ports & interfaces USB port Yes USB 2.0 ports quantity 2RJ-11 ports quantity 1 Ethernet LAN (RJ-45) ports 6 Management features Web-based management Yes Quality of Service (Qo S) support Yes Security Network address translation (NAT) Yes NAT functionality 100 Mb/s Max Sync Rate with VDSL2\n 300 Mb/s Max Sync Rate with VDSL2 35b\n 950 Mb/s NAT Throughput for Ethernet WAN with Hardware Acceleration\n 1.3 Gb/s Total Mult-WAN NAT Throughput\n 800 Mb/s NAT Throughput per WAN without Hardware Acceleration\n 60, 000 NAT Sessions\n 8000 Hardware Accelerated NAT Sessions Firewall Yes Access Control List (ACL) Yes Protocols DHCP server Yes Design Product type Tabletop router Wall mountable Yes On/off switch Yes LED indicators DSLProduct colour Grey Antenna Detachable antenna (s) Yes Antennas quantity 2 Antenna type External Antenna gain level (max)4 d Bi Power Power supply 24 WPower source type ACOutput voltage 12 VAC input voltage 220
- 240 VOperational conditions Storage temperature (T-T)-25
- 70 &176;COperating temperature (T-T)0
- 45 &176;COperating relative humidity (H-H)10
- 90% Weight & dimensions Width 241 mm Height 44 mm Depth 165 mm Packaging data Quick start guide Yes AC adapter included Yes Screws included Yes Antenna included Yes\n \n \n\n\n\n\n\n\n\n



...
Available
£296.70
\n Draytek VAP1060C-K wireless access point 2400 Mbit/s White Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Draytek\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Wireless Access Points\n \n \n SKU:\n VAP1060C-K\n \n \n EAN:\n 4710484741523\n \n \n \n \n \n Description\n \n \n Wi-Fi 6
- Fast & Efficient\n\n The Dray Tek Vigor AP 1060C is a Wi-Fi 6 AX3600 access point with 2.5 Gbps Ethernet capability. The latest wireless standard dramatically improves performance, handling efficiently multiple users & devices. The technology is partially based on LTE features used on mobile networks where many connections are managed by a single AP (mast).\n This powerful access point can handle even more SSIDs. You can configure up to 8 for each wireless band (16 SSIDs in total).\n\n 2.5 Gigabit Power-over-Ethernet\n The Vigor AP 1060C is designed to suit any application, with higher throughput of up to 2.5 Gigabit Ethernet interface, & built-in Po E (Standard IEEE 802.3af Power over Ethernet) as standard, along with the option for powering via DC power supply. Connect the Vigor AP to a Po E-enabled Ethernet switch or Po E injector to power it without local power to the unit (power supply)
- the Vigor AP 1060C will take its power from the Ethernet cable.\n\n Po E is ideal for office installations where Ethernet is available but power isn't. It also provides some great management features, the Po E Device Check feature of Po E Vigor Switch switches can monitor & alert if a Po E device stops responding, or providing its services.\n\n In Mesh wireless networks, where Po E may not be possible, the Vigor AP 1060C can be powered via DC power supply, with its Ethernet port available for use as an uplink to the Mesh network.\n\n Ceiling or Wall Mounted\n\n For a convenient & tidy installation, the Vigor AP 1060C is designed for installation on ceilings & walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms & public spaces.\n\n For mounting on solid ceilings & walls, a circular mounting plate (included with the unit) is fitted & then the Vigor AP 1060C is secured into place by twisting the Vigor AP into the mounting plate.\n\n For suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\n\n Cabling for the Vigor AP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\n\n AP & Repeater Modes\n The Vigor AP 1060C is configurable to suit most networks, with AP & Range Extender modes. In addition to its Mesh capability, it's ideal as a st&-alone Access Point to provide Wi-Fi connectivity for routers & networks without wireless.\n\n Use the Vigor AP 1060C as a Range Extender to connect to any existing wireless network & boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\n\n Cloud Management & More\n Dray Tek Vigor AP wireless access points can be managed as st&-alone APs with their extensive web user interface.\n\n To manage more than one access point, either for a single site or spanning multiple sites, Dray Tek offer a multitude of options for managing Vigor AP access points:\n\n Cloud Management
- Vigor ACS\n Dray Tek's Vigor ACS central management platform makes it possible to manage all Dray Tek products from the Cloud or your own private server. Dray Tek's access points, switches & routers can all be managed through the Vigor ACS management portal, with all of the menu options & features available, just as if they were being set up locally. Dashboard view gives a full overview of a Vigor AP's status & usage.\n\n Vigor ACS is great for managing Vigor A Ps spread across multiple sites, with AP profiles to configure wireless settings, passwords & VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\n\n Ceiling or Wall Mounted\n\n For a convenient & tidy installation, the Vigor AP 1060C is designed for installation on ceilings & walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms & public spaces.\n\n For mounting on solid ceilings & walls, a circular mounting plate (included with the unit) is fitted & then the Vigor AP 1060C is secured into place by twisting the Vigor AP into the mounting plate.\n\n For suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\n\n Cabling for the Vigor AP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\n\n AP & Repeater Modes\n The Vigor AP 1060C is configurable to suit most networks, with AP & Range Extender modes. In addition to its Mesh capability, it's ideal as a st&-alone Access Point to provide Wi-Fi connectivity for routers & networks without wireless.\n\n Use the Vigor AP 1060C as a Range Extender to connect to any existing wireless network & boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\n\n Mobile Device Management\n\n Through the web interface of the Vigor AP 1060C, network administrators can easily check on AP data usage & clients connected, with options to disconnect or block disruptive clients.\n\n Mobile Device Management builds on regular Access Control, which can be used to whitelist & blacklist individual clients. MDM makes it possible to set up SSIDs that only Windows or Apple desktops can connect to, disconnecting Android or i OS clients or vice versa, to suit the requirements of your wireless network.\n\n Analytics data from each Vigor AP graphs how many wireless clients have connected to the AP over time, as well as how many wireless clients passed by without connecting.\n\n AP Assisted Roaming\n Large wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\n\n Dray Tek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, Vigor A Ps communicate with each other to determine which clients can get a better signal as those clients move around.\n\n If a client moves into range of another Vigor AP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal & better speeds.\n \n \n \n Specifications\n \n Data transmission Maximum data transfer rate 2400 Mbit/s Performance 2.4 GHz Yes 5 GHz Yes Wi-Fi Multimedia (WMM)/ (WME) Yes Reset button Yes Number of users 256 user (s) Networking standards IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Maximum data transfer rate 2400 Mbit/s MIMO type Multi User MIMOMIMOYes Network Number of users 256 user (s) Networking standards IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Features 2.4 GHz Yes 5 GHz Yes Wi-Fi Multimedia (WMM)/ (WME) Yes Number of users 256 user (s) Networking standards IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Maximum data transfer rate 2400 Mbit/s MIMO type Multi User MIMOMIMOYes Maximum data transfer rate (2.4 GHz)1200 Mbit/s Maximum data transfer rate (5 GHz)2400 Mbit/s Security Security algorithms WPA, WPA2, WPA3 Service Set Identifier (SSID) features Hidden SSIDProtocols DHCP client Yes Management features Comm&-line interface (CLI) Yes Ports & interfaces Ethernet LAN (RJ-45) ports 1 Power Power consumption (max)21 WPower over Ethernet (Po E) Yes Design Placement Ceiling, Wall Product colour White Reset button Yes WPS push button Yes Antenna Antenna type Internal Antennas quantity 9 Antenna gain level (max)5.8 d Bi Technical details Reset button Yes WPS push button Yes Sustainability compliance Yes Sustainability certificates CE, Ro HSOperational conditions Operating relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;CWeight & dimensions Width 205 mm Depth 205 mm Weight 809 g Height 33.2 mm Packaging data Quick start guide Yes Cables included LAN (RJ-45) Packaging content Quick start guide Yes Cables included LAN (RJ-45) Other features WPS push button Yes\n \n \n\n\n\n\n\n\n\n




...
Available
£105.49
Vigor 2760 VDSL/ADSL2+ firewall/router Introducing the Vigor 2760, Draytek’s latest DSL router, ideal for your home or small office. It provides connectivity to your PCs or other Internet-connected devices (laptops, tablets, games consoles, smartphones) via its built-in Gigabit ports. The firewall helps protect your network from external threats, as well as the Vigor 2760's built-in content filtering which gives you control over what & when your local users can access or download. Fully Future-Proof The Vigor 2760 supports all variants of mass-market DSL technology available, so if you have ADSL today it will work with that, but when VDSL (FTTC) comes to your area later, you don’t need to go out & purchase a new route. VDSL is available from BT under their ' Infinity' service, currently providing downstream speeds of up to 80 Mb/s (depending on local service). Other ISPs are also starting to introduce VDSL across the country so coverage continues to increase. You can also use 3G/4G networks. Most of us are still mostly using IPv 4 as our Internet protocol (the system that gives us IP addresses like 194.158.12.42) but that's going to change; over the next few years, IPv 6 will increase in usage & eventually we'll all be using IPv 6, so the Vigor 2760 already supports it
- IPv 4 & IPv 6 can be run simultaneously (dual-stack) on the Vigor 2760. Web Content Filtering The content control features of the Vigor 2760 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists (a list of allowed sites) or blacklists (a list of blocked sites), blocking IM/P2P applications or other potentially harmful or time-wasting content. This is particularly useful in the home, where children need to be protected, or workplaces where inappropriate sites may be a liability, security risk or harmful to productivity. Restrictions can be per user, per PC or universal. Using Dray Tek's Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription to the Globalview service, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day Globalview trial is included with your new router. 3G/4G Cellular Data & Network Attatched Storage (NAS) The Vigor 2760 has two USB (Universal Serial Bus) ports which can be used for 3G/3G modems, USB (Universal Serial Bus) memory or a printer for shared access. You can connect a USB (Universal Serial Bus) 3G/4G modem to the Vigor 2760 & use the cellular networks (O2, EE, Vodafone, Virgin, 3) as your Internet connectivity. That can be your primary (only) connection, or the router can switch over to 3G in the case of ADSL/VDSL outage so that you're always connected. Check with us for the latest list of supported 3G modems as it is continuously updated as the telcos introduce new modem models. You can use your Vigor 2760 as a network attached storage (NAS) repository. This means that you can store files for local or remote users (anywhere on the Internet) to download
- ideal for when you're on the move. You can also let users upload files
- each remote user can have their own login & read-only or read-write FTP access to a preset directory. The Vigor 2760 has 40 Mb of memory built-in for NAS but you can add a USB (Universal Serial Bus) memory stick for as much storage as you need.


...
Archived Product
£116.99
Vigor 2760n VDSL/ADSL2+ Wireless-n firewall/router Introducing the Vigor 2760n, Draytek’s latest DSL router, ideal for your home or small office. It provides connectivity to your PCs or other Internet-connected devices (laptops, tablets, games consoles, smartphones) via its built-in Gigabit ports, or using Wireless LAN. The firewall helps protect your network from external threats, as well as the Vigor 2760n's built-in content filtering which gives you control over what & when your local users can access or download. For Wireless LAN usage, the Vigor 2760n version supports multiple security methods, including strong encryption but also hardware-specific authorisation & selectable client isolation (from each other). Fully Future-Proof The Vigor 2760n supports all variants of mass-market DSL technology available, so if you have ADSL today it will work with that, but when VDSL (FTTC) comes to your area later, you don’t need to go out & purchase a new route. VDSL is available from BT under their ' Infinity' service, currently providing downstream speeds of up to 80 Mb/s (depending on local service). Other ISPs are also starting to introduce VDSL across the country so coverage continues to increase. You can also use 3G/4G networks. Most of us are still mostly using IPv 4 as our Internet protocol (the system that gives us IP addresses like 194.158.12.42) but that's going to change; over the next few years, IPv 6 will increase in usage & eventually we'll all be using IPv 6, so the Vigor 2760n already supports it
- IPv 4 & IPv 6 can be run simultaneously (dual-stack) on the Vigor 2760n. Web Content Filtering The content control features of the Vigor 2760n allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists (a list of allowed sites) or blacklists (a list of blocked sites), blocking IM/P2P applications or other potentially harmful or time-wasting content. This is particularly useful in the home, where children need to be protected, or workplaces where inappropriate sites may be a liability, security risk or harmful to productivity. Restrictions can be per user, per PC or universal. Using Dray Tek's Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription to the Globalview service, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day Globalview trial is included with your new router. 3G/4G Cellular Data & Network Attatched Storage (NAS) The Vigor 2760n has two USB (Universal Serial Bus) ports which can be used for 3G/3G modems, USB (Universal Serial Bus) memory or a printer for shared access. You can connect a USB (Universal Serial Bus) 3G/4G modem to the Vigor 2760n & use the cellular networks (O2, EE, Vodafone, Virgin, 3) as your Internet connectivity. That can be your primary (only) connection, or the router can switch over to 3G in the case of ADSL/VDSL outage so that you're always connected. Check with us for the latest list of supported 3G modems as it is continuously updated as the telcos introduce new modem models. You can use your Vigor 2760n as a network attached storage (NAS) repository. This means that you can store files for local or remote users (anywhere on the Internet) to download
- ideal for when you're on the move. You can also let users upload files
- each remote user can have their own login & read-only or read-write FTP access to a preset directory. The Vigor 2760n has 40 Mb of memory built-in for NAS but you can add a USB (Universal Serial Bus) memory stick for as much storage as you need.


...
Archived Product

Draytek V2865AC-K VDSL2 Gigabit Ethernet Wireless Router

For an improved alternative of the V2865AC-K please take a look at:\nDrayTek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\nVDSL and Ethernet Load Balancer\nThe Vigor 2865 is a VDSL and Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management and more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN.\nFeaturing high throughput with Load Balancing and Failover connectivity, suitable for handling Fibre to the Premises (FTTP) and Gigabit Internet connections. Offering up to 950Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\nWith 802.11ac wireless on 'ac' models, it provides fast
wireless coverage to your network's computers and devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections and nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\nAC1300 Wireless LAN with Mesh\nThe 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast and efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless and allowing the router to effectively serve more wireless clients.\nWith firmware 4.3.0, the Vigor 2865 'ac'
wireless routers can be used as part of DrayTek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access and management of Mesh VigorAPs directly.\n\nIdeal VPN router for SMB\nA feature central to DrayTek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices and branch offices back to HQ, or home-based/mobile teleworkers back to your office.\nThe Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput and up to 50 concurrently active VPN tunnels.\nIPsec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\nConnect VPNs from behind NAT with
DrayTek's VPN Matcher\nA typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\nDrayTek's new VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel.\n\nConnecting Remote Sites with LAN to LAN VPN\nSupporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home
offices together with fast and secure IPsec VPN tunnels.\nOnce connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.\n\nDrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN\nThe Vigor 2865 supports up to 16 active DrayTek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote DrayTek Vigor routers back to your main office using SSL/TLS technology - the same encryption that you use for secure web sites such as your bank.\nTeleworkers can easily create a secure SSL VPN tunnel to the DrayTek Vigor 2865 using the free DrayTek Smart VPN Client app. Available for Windows, macOS, Apple iOS (iPad, iPhone) and Android
devices.\n\n5+1 Gigabit LAN Ports with VLANs\nThe Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage.\nWith 5 dedicated LAN ports and one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\nWith Multiple LAN subnets and VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service and Route Policy applied.\nThe router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other
devices that support VLAN tags, such as the DrayTek VigorSwitch G1080 8-port switch, for additional network ports.\n\nDesigned for Central Management\nThe Vigor 2865 series (along with most other DrayTek routers, Access points and switches) can be centrally managed by our VigorACS central management platform.\nThis scalable solution provides visibility, control and reporting of your entire DrayTek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. VigorACS also provides features like automated/bulk firmware updates, VPN management and alarms for connectivity or other issues.\n\nRobust & Comprehensive IPv4 / IPv6 Firewall\nSecurity is always taken seriously with DrayTek routers. The firewall protects
against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems.\nThe DrayTek object-based firewall enables you to create combinations of Firewall rules and Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\nThe Vigor 2865 supports both IPv4 and IPv6 with Dual-Stack IPv4/IPv6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering and VLANs support both IPv4 and IPv6 networks.\n\nWeb Content Filtering with DNS Filter\nThe content control features of the Vigor 2865 allow you to
set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal and according to time schedules.\nContent filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\nUsing the GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\nHigh Availability -
Hardware Failover\nFor even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary and secondary router able to provide connectivity to your network and subnets.\nIn the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing and VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\nDrayDDNS - DrayTek Dynamic DNS Address\nDrayTek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\nThis address automatically updates whenever the Internet
connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate and access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management and any other services you have made accessible through the router.\nThe Vigor 2865 can also authenticate your DrayDDNS hostname with free SSL/TLS certificates provided by LetsEncrypt, the router manages and automates the certificate process. Keeping the certificate up to date and ready for use with SSL VPN and other services.\n\nQuality of Service & Bandwidth Control\nPrioritise latency-sensitive applications on your network with Quality of Service.\nApp QoS simplifies setting up Quality of Service
significantly, simply select which applications or services to prioritise, such as Zoom and Skype.\nUse 4 separate queues to give priority to servers & PCs (IP address), services such as VoIP or DNS, or packet tagging used by IP phones with 802.1p and DSCP support\nAuto Voice VLAN allows the router to automatically prioritise VoIP calls as they pass through the router without additional configuration.\nControl throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\nCentral AP & Switch Management\nThe Vigor 2865 manages DrayTek VigorAP access points and VigorSwitch switches connected locally to the router. This enables you to centrally control, manage and
administer multiple AP & Switch devices installed around your building/campus from just one router.\n\nSpecifications\n\n\n\n\nNetworking, Connectivity & Ports\n\n\nModel\nDrayTek Vigor V2865AC-K\n\n\nForm-Factor\nDesktop\n\n\nDevice Type\nN/A\n\n\nCompatible Internet Connections\n\n\n 3G via Compatible USB Modems\n 4G via Compatible USB Modems\n VDSL 2\n\n\n\n\nNetwork Connectivity\n1GbE + 10GbE\n\n\nNetwork Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) BaseT for LAN\n 1 x RJ45 10/100/1000 (Gigabit) BaseT for LAN/WAN\n\n\n\n\nOther Connectors\n\n\n 1 x RJ-11\n 2 x USB 2.0\n\n\n\n\nUSB Applications\n3G/4G Sharing\n\n\nWired Protocols\n\n\n IPv4\n IPv6\n\n\n\n\nTotal LAN Connections\n5\n\n\nTotal WAN Connections\n1\n\n\n64 Bytes L3 Forwarding Performance\n\n\n\n512+ Bytes L3 Forwarding
Performance\n\n\n\n\n\n\n\nWireless\n\n\nWireless Speed\n1300 Mbps\n\n\nWireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\nWireless Band\n\n\n\nFrequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\nOperation Channel\n\n\n\nWireless Transmitter Power\nN/A\n\n\nAntenna\n2\n\n\n\n\n\n\nCore Features\n\n\nFeatures\nIPv6 Support\n\n\nRouter/Modem Processor\n\n\n\nInternal RAM Memory\n\n\n\nInternal RAM Memory Type\n\n\n\nInternal Flash Memory\n\n\n\nLED Indicators\n\n\n\nButtons\n1 x Wireless On/Off Button\n\n\nOS Support\n\n\n Android\n iOS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\nMax. Power Consumption\n24 W\n\n\nPSU Type\n\n\n\n\n\n\n\nSecurity & VPN\n\n\nSecurity Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n
QoS for critical operations\n\n\n\n\nFirewall/NAT\nNo\n\n\nManagement\n\n\n Configuration backup and restore\n DHCP\n FW Upgrade, Config Upl/Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\nVPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\nPhysical Specifications\n\n\nDimensions\n241 x 44 x 165 mm (WxHxD)\n\n\nWeight\n620 g\n\n\n\n\n\n\nAdditional Specifications\n\n\nNote\nN/A\n\n\n\n\n\n\nAdditional Information\n\n\nScan Code\nLN114196\n\n\nModel Number\nV2865AC-K\n\n\nGTIN\n4710484741240\n\n\n\n
Availability: In Stock
£249.83

Product Description

For an enhanced alternative of the V2865AC-K please take a look at:\n Dray Tek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\n VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n With 802.11ac wireless on 'ac' models, it provides fast wireless coverage to your network's computers & devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections & nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\n AC1300 Wireless LAN with Mesh\n The 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n With firmware 4.3.0, the Vigor 2865 'ac' wireless routers can be used as part of Dray Tek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access & management of Mesh Vigor A Ps directly.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n 2\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114196\n\n\n Model Number\n V2865AC-K\n\n\n GTIN\n 4710484741240\n\n\n\n

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
Windows 8 - The latest version of the Microsoft operating system.
LAN - Local Area Network
RAM - Random Access memory
iPhone - A popular smartphone manufactured by Apple
AC - Alternating Current
RJ45 - A computer networking connection. A small square shaped connector.
Windows XP - A computer operating system from microsoft released in 2001
Date - A day on a calendar
Date - A social activity whith a current or potential partner
Button - A round or square object used for fastening clothing or other items
Filter - A device used to separate mixtures
Filter - An optical device to remove or enhance particular wavelengths of light.
button - A small fastener used on clothing to secure two pieces of fabric together.
PC - Personal Computer - an electronic device for acheiving multiple electronic tasks including word processing, emails and internet access
Cable - A series of wires bonded to form a single thread
Gigabit Ethernet - Also known as GbE or 1 GigE, a network standard which transfers date at one gigabit per second.
Office - A room where people work
speed - A measurement of how fast an object travels between two points
Day - The time it takes a planet or other space objects to complete one rotation.
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Network - A link and communication between things. Often computers or people.
USB - Universal Serial Bus. A method of connecting a device to a computer
Small - something that takes up less space than normal.
Normal - often relating to someone or something that is average.
Tunnel - a tunnel travels through an abject connecting one place to another.
Alternative - Another available choice or possibility
Processor - A part of a computer or machine that processes functions,
Certificate - A document proving the truth of facts, for example a birth certificate.
Home - A place of permanent residence for families.
Estate - A group of houses on the same land or area.
Feature - An attribute that makes something stand out.
Primary - the beginning of something, of chief importance.
Wireless - A wire free device that uses radio and microwaves to send signals.
Skype - An online software application that allows users to call and use webcams for free over the internet.
Mesh - A material mad up of crossed over fibres such as metal or thread.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Memory - A way to describe the way in which the brain can remember things.
Ideal - Something that satisfies a perfect criteria.
Environment - The conditions and surrounding area.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu