More From Contributor

£40.56
Enhanced Warranty Support Your networking equipment forms a vital part of your business infrastructure, & so you appreciate the comfort of knowing that in the event of a problem, it can be resolved quickly. Vigor Care is designed to add that additional peace of mind to your mission-critical Dray Tek networking components. Vigor Care provides the following benefits in addition to the manufacturer's standard (included) warranty & support: Upgrade of warranty to 3-years Advanced-Replacement of faulty unit
- Next working day Pre-configuring of replacement unit Cover for the whole 3-years for one payment Advanced Replacement If you suspect that your covered Dray Tek product has developed a fault, our experienced engineers will help you to diagnose the problem & determine whether the unit needs to be service of replaced. If it does, a replacement unit will be sent out the same day for delivery on the next working/business day. If you wish to travel to the service centre (currently North of London)), replacement or diagnosis/repair can be carried out in person. Pre-Configuration We appreciate that not every company has the staff or time to set up a replacement unit. If we do need to send you a replacement unit, we can pre-configure it exactly as your old unit so it should be a simple plug/unplug operation to install it when it arrives. In order to take advantage of this service, you need to keep an up to date configuration backup which you can either keep yourself (as long as you think you will have some method to send it to us when needed) or you can send us your latest configuration backup & we will store it, in case its needed.3-Year Warranty With Vigor Care, you also have the benefit of an extention to a full 3-years of warranty so that if a fault does develop, you will have no bills for parts, labour or replacement in the event that a warranty fault develops. We're proud of the reliability that Dray Tek products achieve but however unlikely a problem might be, if your business depends on your Dray Tek product, Vigor Care should give you the peace of mind & convenience that you need.VCARE1A
- Vigor 2110, 2710, 2130, 120 Series VCARE2B
- Vigor 2820, 3100, 2920, 2930 Series VCARE3C
- Vigor 2955, Vigor Pro, 3300 Series VCARE4D
- Vigor 3900\n\n\n\n\n\n




...
Available
£30.74
\n Draytek RM1 mounting kit\n \n \n \n \n \n \n Manufacturer:\n Draytek\n \n \n Category:\n Computer Components\n \n \n Sub-Category:\n Mounting Kits\n \n \n SKU:\n RM1\n \n \n EAN:\n 4719853551787 4719853551794\n \n \n \n \n\n Description\n \n \n The RM1 Rackmount Bracket enables you to fit any Vigor 2820, 2930 or Vigor Pro 5300 series router into a standard 19" rack or cabinet. The bracket takes up one rack slot (1U). The front mounted sockets remain fully accessible. A cable retainer is fitted at the back to hold the power cord captive to avoid addidental disconnection. For wireless models, we then recommend extension aerials (or aerial extension cables) as the rack will generally interfere with wireless signals if the aerials are mounted inside.\n \n \n\n Specifications\n \n Technical details Rack capacity 1UProduct colour Black Packaging content Quantity 1 Other features Quantity 1 Weight & dimensions Size 5.05 m (199")\n \n \n\n\n\n\n\n ...
Available
£157.18
The Ideal So Ho VPN Router for VDSL & Gigabit Fibre\nhe Vigor 2765 is a VDSL or Ethernet WAN router with Gigabit performance, allowing you to make full use of Dray Tek's advanced feature set, with Quality of Service, VPN & Content Filtering. Connect the Vigor 2765 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Either connection, or a 4G USB (Universal Serial Bus) modem can be used as the primary or Failover connections, so that if the main Internet connection goes down, the Vigor 2765 can use its backup connections to guarantee reliable Internet access & VPN connectivity.\n\n Powerful So Ho VPN Router\n Dray Tek's Vigor routers feature extensive VPN (Virtual Private Networking) capabilities. The Vigor 2765 series is no exception, its VPN capabilities are well suited to So Ho (small office, home office) environments. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2765 means that you can make full use of Fibre broadband with VPN. Up to 200 Mbps of IPsec VPN throughput for fast & secure connections, to VPN services & other offices.\n Connect 2 VPN tunnels concurrently to access remote resources securely. Connect the Vigor 2765 in a branch office or home office to a head office for seamless access to network resources.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 2 concurrently active VPN tunnels & 200 Mbps of IPsec VPN throughput, the Vigor 2765 series is ideal as a branch-office or home-office router, to connect with a head office router such as the Vigor 3910.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n Connect up to 2 Dray Tek SSL VPN tunnels. These encrypted tunnels securely link teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- similar to the HTTPS security that's used for most secure websites on the internet such as on-line banking & shopping services.\n Teleworkers can connect with a secure SSL VPN tunnel to the Dray Tek Vigor 2765, using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n AC1300 Wireless LAN with Mesh\n The 2765 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n\n 4 Gigabit LAN Ports with VLANs\n The Vigor 2765 series provides 4 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n 2 LAN subnets & VLANs allow the Vigor 2765 to provide a guest network fully separate from internal network data. Or any other configuration that can use 2 subnets, whether that's 2 wireless networks with different IP ranges, or a separate LAN subnet for printers & server. Each network can have its own Content Filtering, Firewall, Quality of Service & Route Policy configurations.\n\n Designed for Central Management\n The Vigor 2765 series can be centrally managed along with Vigor AP's & switches, with the Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2765 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2765 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "vigor 2765.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2765 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2765 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service with App Qo S\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Multi-Purpose USB (Universal Serial Bus) Ports\n The Vigor 2765 has two USB (Universal Serial Bus) ports which can be used for 4G/LTE modem, USB (Universal Serial Bus) temperature sensor, storage, or a printer for shared access.\n Connect a USB (Universal Serial Bus) 4G/LTE modem to the Vigor 2765 & use mobile broadband as your Internet connectivity. That can be your primary connection or the router can switch over to 4G, in the case of ADSL/VDSL outage so that you're always connected.\n Use your Vigor 2765 as a network attached storage (NAS) by connecting a USB (Universal Serial Bus) flash drive or hard drive. With Windows networking (SMB) & FTP connectivity to allow Windows, Apple, Android & Linux devices to access the router's storage, locally & through VPN.\n\n Central AP & Switch Management\n The Vigor 2765 can manage & aid in setting up Vigor AP access points & Vigor Switch switches, connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your home or office, through the router's web interface for local or remote setup.\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2765AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n VDSL2/ADSL2 Gigabit Wi-Fi Modem Router\n\n\n Compatible Internet Connections\n\n\n 4G via Compatible USB (Universal Serial Bus) Modems\n ADSL\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 3 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 4\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n Dual Band\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n\n\n Beamforming\n IPv 6 Support\n MU-MIMO\n\n\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 21.8 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n Shared Key\n WEP\n WPA\n WPA2\n WPA3\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 207 x 52 x 131 mm (Wx Hx D)\n\n\n Weight\n\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n\n\n\n\n Model Number\n V2765AC-K\n\n\n GTIN\n 4712909129633\n\n\n\n

...
Available
£157.18
The Ideal So Ho VPN Router for VDSL & Gigabit Fibre\nhe Vigor 2765 is a VDSL or Ethernet WAN router with Gigabit performance, allowing you to make full use of Dray Tek's advanced feature set, with Quality of Service, VPN & Content Filtering. Connect the Vigor 2765 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Either connection, or a 4G USB (Universal Serial Bus) modem can be used as the primary or Failover connections, so that if the main Internet connection goes down, the Vigor 2765 can use its backup connections to guarantee reliable Internet access & VPN connectivity.\n\n Powerful So Ho VPN Router\n Dray Tek's Vigor routers feature extensive VPN (Virtual Private Networking) capabilities. The Vigor 2765 series is no exception, its VPN capabilities are well suited to So Ho (small office, home office) environments. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2765 means that you can make full use of Fibre broadband with VPN. Up to 200 Mbps of IPsec VPN throughput for fast & secure connections, to VPN services & other offices.\n Connect 2 VPN tunnels concurrently to access remote resources securely. Connect the Vigor 2765 in a branch office or home office to a head office for seamless access to network resources.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 2 concurrently active VPN tunnels & 200 Mbps of IPsec VPN throughput, the Vigor 2765 series is ideal as a branch-office or home-office router, to connect with a head office router such as the Vigor 3910.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n Connect up to 2 Dray Tek SSL VPN tunnels. These encrypted tunnels securely link teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- similar to the HTTPS security that's used for most secure websites on the internet such as on-line banking & shopping services.\n Teleworkers can connect with a secure SSL VPN tunnel to the Dray Tek Vigor 2765, using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n AC1300 Wireless LAN with Mesh\n The 2765 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n\n 4 Gigabit LAN Ports with VLANs\n The Vigor 2765 series provides 4 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n 2 LAN subnets & VLANs allow the Vigor 2765 to provide a guest network fully separate from internal network data. Or any other configuration that can use 2 subnets, whether that's 2 wireless networks with different IP ranges, or a separate LAN subnet for printers & server. Each network can have its own Content Filtering, Firewall, Quality of Service & Route Policy configurations.\n\n Designed for Central Management\n The Vigor 2765 series can be centrally managed along with Vigor AP's & switches, with the Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2765 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2765 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "vigor 2765.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2765 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2765 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service with App Qo S\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Multi-Purpose USB (Universal Serial Bus) Ports\n The Vigor 2765 has two USB (Universal Serial Bus) ports which can be used for 4G/LTE modem, USB (Universal Serial Bus) temperature sensor, storage, or a printer for shared access.\n Connect a USB (Universal Serial Bus) 4G/LTE modem to the Vigor 2765 & use mobile broadband as your Internet connectivity. That can be your primary connection or the router can switch over to 4G, in the case of ADSL/VDSL outage so that you're always connected.\n Use your Vigor 2765 as a network attached storage (NAS) by connecting a USB (Universal Serial Bus) flash drive or hard drive. With Windows networking (SMB) & FTP connectivity to allow Windows, Apple, Android & Linux devices to access the router's storage, locally & through VPN.\n\n Central AP & Switch Management\n The Vigor 2765 can manage & aid in setting up Vigor AP access points & Vigor Switch switches, connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your home or office, through the router's web interface for local or remote setup.\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2765AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n VDSL2/ADSL2 Gigabit Wi-Fi Modem Router\n\n\n Compatible Internet Connections\n\n\n 4G via Compatible USB (Universal Serial Bus) Modems\n ADSL\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 3 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 4\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n Dual Band\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n\n\n Beamforming\n IPv 6 Support\n MU-MIMO\n\n\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 21.8 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n Shared Key\n WEP\n WPA\n WPA2\n WPA3\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 207 x 52 x 131 mm (Wx Hx D)\n\n\n Weight\n\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n\n\n\n\n Model Number\n V2765AC-K\n\n\n GTIN\n 4712909129633\n\n\n\n

...
Available
£157.18
The Ideal So Ho VPN Router for VDSL & Gigabit Fibre\nhe Vigor 2765 is a VDSL or Ethernet WAN router with Gigabit performance, allowing you to make full use of Dray Tek's advanced feature set, with Quality of Service, VPN & Content Filtering. Connect the Vigor 2765 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Either connection, or a 4G USB (Universal Serial Bus) modem can be used as the primary or Failover connections, so that if the main Internet connection goes down, the Vigor 2765 can use its backup connections to guarantee reliable Internet access & VPN connectivity.\n\n Powerful So Ho VPN Router\n Dray Tek's Vigor routers feature extensive VPN (Virtual Private Networking) capabilities. The Vigor 2765 series is no exception, its VPN capabilities are well suited to So Ho (small office, home office) environments. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2765 means that you can make full use of Fibre broadband with VPN. Up to 200 Mbps of IPsec VPN throughput for fast & secure connections, to VPN services & other offices.\n Connect 2 VPN tunnels concurrently to access remote resources securely. Connect the Vigor 2765 in a branch office or home office to a head office for seamless access to network resources.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 2 concurrently active VPN tunnels & 200 Mbps of IPsec VPN throughput, the Vigor 2765 series is ideal as a branch-office or home-office router, to connect with a head office router such as the Vigor 3910.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n Connect up to 2 Dray Tek SSL VPN tunnels. These encrypted tunnels securely link teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- similar to the HTTPS security that's used for most secure websites on the internet such as on-line banking & shopping services.\n Teleworkers can connect with a secure SSL VPN tunnel to the Dray Tek Vigor 2765, using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n AC1300 Wireless LAN with Mesh\n The 2765 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n\n 4 Gigabit LAN Ports with VLANs\n The Vigor 2765 series provides 4 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n 2 LAN subnets & VLANs allow the Vigor 2765 to provide a guest network fully separate from internal network data. Or any other configuration that can use 2 subnets, whether that's 2 wireless networks with different IP ranges, or a separate LAN subnet for printers & server. Each network can have its own Content Filtering, Firewall, Quality of Service & Route Policy configurations.\n\n Designed for Central Management\n The Vigor 2765 series can be centrally managed along with Vigor AP's & switches, with the Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2765 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2765 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "vigor 2765.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2765 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2765 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service with App Qo S\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Multi-Purpose USB (Universal Serial Bus) Ports\n The Vigor 2765 has two USB (Universal Serial Bus) ports which can be used for 4G/LTE modem, USB (Universal Serial Bus) temperature sensor, storage, or a printer for shared access.\n Connect a USB (Universal Serial Bus) 4G/LTE modem to the Vigor 2765 & use mobile broadband as your Internet connectivity. That can be your primary connection or the router can switch over to 4G, in the case of ADSL/VDSL outage so that you're always connected.\n Use your Vigor 2765 as a network attached storage (NAS) by connecting a USB (Universal Serial Bus) flash drive or hard drive. With Windows networking (SMB) & FTP connectivity to allow Windows, Apple, Android & Linux devices to access the router's storage, locally & through VPN.\n\n Central AP & Switch Management\n The Vigor 2765 can manage & aid in setting up Vigor AP access points & Vigor Switch switches, connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your home or office, through the router's web interface for local or remote setup.\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2765AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n VDSL2/ADSL2 Gigabit Wi-Fi Modem Router\n\n\n Compatible Internet Connections\n\n\n 4G via Compatible USB (Universal Serial Bus) Modems\n ADSL\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 3 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 4\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n Dual Band\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n\n\n Beamforming\n IPv 6 Support\n MU-MIMO\n\n\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 21.8 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n Shared Key\n WEP\n WPA\n WPA2\n WPA3\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 207 x 52 x 131 mm (Wx Hx D)\n\n\n Weight\n\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n\n\n\n\n Model Number\n V2765AC-K\n\n\n GTIN\n 4712909129633\n\n\n\n

...
Available
£188.79
VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n N/A\n\n\n Wireless Protocols\n IEEE 802.11ac\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114199\n\n\n Model Number\n V2865-K\n\n\n GTIN\n 4710484741257\n\n\n\n


...
Available
£188.79
VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n N/A\n\n\n Wireless Protocols\n IEEE 802.11ac\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114199\n\n\n Model Number\n V2865-K\n\n\n GTIN\n 4710484741257\n\n\n\n


...
Available
£249.83
For an enhanced alternative of the V2865AC-K please take a look at:\n Dray Tek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\n VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n With 802.11ac wireless on 'ac' models, it provides fast wireless coverage to your network's computers & devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections & nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\n AC1300 Wireless LAN with Mesh\n The 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n With firmware 4.3.0, the Vigor 2865 'ac' wireless routers can be used as part of Dray Tek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access & management of Mesh Vigor A Ps directly.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n 2\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114196\n\n\n Model Number\n V2865AC-K\n\n\n GTIN\n 4710484741240\n\n\n\n


...
Available
£249.83
For an enhanced alternative of the V2865AC-K please take a look at:\n Dray Tek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\n VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n With 802.11ac wireless on 'ac' models, it provides fast wireless coverage to your network's computers & devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections & nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\n AC1300 Wireless LAN with Mesh\n The 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n With firmware 4.3.0, the Vigor 2865 'ac' wireless routers can be used as part of Dray Tek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access & management of Mesh Vigor A Ps directly.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n 2\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114196\n\n\n Model Number\n V2865AC-K\n\n\n GTIN\n 4710484741240\n\n\n\n


...
Available
£249.83
For an enhanced alternative of the V2865AC-K please take a look at:\n Dray Tek Vigor V2866AC-K G.fast/DSL & Ethernet Router With AC1300 Wireless\n\n VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n With 802.11ac wireless on 'ac' models, it provides fast wireless coverage to your network's computers & devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections & nearby wireless networks, where for instance a neighbour's wireless network could provide an emergency backup connection.\n\n AC1300 Wireless LAN with Mesh\n The 2865 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast & efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless & allowing the router to effectively serve more wireless clients.\n With firmware 4.3.0, the Vigor 2865 'ac' wireless routers can be used as part of Dray Tek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access & management of Mesh Vigor A Ps directly.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865AC-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n 1300 Mbps\n\n\n Wireless Protocols\n\n\n IEEE 802.11a\n IEEE 802.11ac\n IEEE 802.11b\n IEEE 802.11g\n IEEE 802.11n\n\n\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n 2.4 GHz\n 5 GHz\n\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n 2\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114196\n\n\n Model Number\n V2865AC-K\n\n\n GTIN\n 4710484741240\n\n\n\n


...
Available

Draytek V2865-K VDSL2 Gigabit Ethernet Wired Router

VDSL and Ethernet Load Balancer\nThe Vigor 2865 is a VDSL and Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management and more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN.\nFeaturing high throughput with Load Balancing and Failover connectivity, suitable for handling Fibre to the Premises (FTTP) and Gigabit Internet connections. Offering up to 950Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\nIdeal VPN router for SMB\nA feature central to DrayTek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices and branch offices back to HQ, or
home-based/mobile teleworkers back to your office.\nThe Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput and up to 50 concurrently active VPN tunnels.\nIPsec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\nConnect VPNs from behind NAT with DrayTek's VPN Matcher\nA typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN
server may be impossible.\nDrayTek's new VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel.\n\nConnecting Remote Sites with LAN to LAN VPN\nSupporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast and secure IPsec VPN tunnels.\nOnce connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.\n\nDrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN\nThe Vigor 2865 supports up to 16 active DrayTek SSL VPN tunnel connections. These are
encrypted tunnels linking your teleworkers or remote DrayTek Vigor routers back to your main office using SSL/TLS technology - the same encryption that you use for secure web sites such as your bank.\nTeleworkers can easily create a secure SSL VPN tunnel to the DrayTek Vigor 2865 using the free DrayTek Smart VPN Client app. Available for Windows, macOS, Apple iOS (iPad, iPhone) and Android devices.\n\n5+1 Gigabit LAN Ports with VLANs\nThe Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage.\nWith 5 dedicated LAN ports and one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\nWith Multiple LAN
subnets and VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service and Route Policy applied.\nThe router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the DrayTek VigorSwitch G1080 8-port switch, for additional network ports.\n\nDesigned for Central Management\nThe Vigor 2865 series (along with most other DrayTek routers, Access points and switches) can be centrally managed by our VigorACS central management platform.\nThis scalable solution provides visibility, control and reporting of your entire
DrayTek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. VigorACS also provides features like automated/bulk firmware updates, VPN management and alarms for connectivity or other issues.\n\nRobust & Comprehensive IPv4 / IPv6 Firewall\nSecurity is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems.\nThe DrayTek object-based firewall enables you to create combinations of Firewall rules and Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network,
only specified devices or just the network that guests can connect to.\nThe Vigor 2865 supports both IPv4 and IPv6 with Dual-Stack IPv4/IPv6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering and VLANs support both IPv4 and IPv6 networks.\n\nWeb Content Filtering with DNS Filter\nThe content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal and according to time schedules.\nContent filtering can also block sites using HTTPS/SSL where URLs are encrypted (and
normal routers cannot block).\nUsing the GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\nHigh Availability - Hardware Failover\nFor even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary and secondary router able to provide connectivity to your network and subnets.\nIn the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing and VPN connectivity with no
intervention required. This can remove the possibility of a single point of failure within your routers.\n\nDrayDDNS - DrayTek Dynamic DNS Address\nDrayTek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\nThis address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate and access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management and any other services you have made accessible through the router.\nThe Vigor 2865 can also authenticate
your DrayDDNS hostname with free SSL/TLS certificates provided by LetsEncrypt, the router manages and automates the certificate process. Keeping the certificate up to date and ready for use with SSL VPN and other services.\n\nQuality of Service & Bandwidth Control\nPrioritise latency-sensitive applications on your network with Quality of Service.\nApp QoS simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom and Skype.\nUse 4 separate queues to give priority to servers & PCs (IP address), services such as VoIP or DNS, or packet tagging used by IP phones with 802.1p and DSCP support\nAuto Voice VLAN allows the router to automatically prioritise VoIP calls as they pass through the router without additional
configuration.\nControl throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\nCentral AP & Switch Management\nThe Vigor 2865 manages DrayTek VigorAP access points and VigorSwitch switches connected locally to the router. This enables you to centrally control, manage and administer multiple AP & Switch devices installed around your building/campus from just one router.\n\nSpecifications\n\n\n\n\nNetworking, Connectivity & Ports\n\n\nModel\nDrayTek Vigor V2865-K\n\n\nForm-Factor\nDesktop\n\n\nDevice Type\nN/A\n\n\nCompatible Internet Connections\n\n\n 3G via Compatible USB Modems\n 4G via Compatible USB Modems\n VDSL 2\n\n\n\n\nNetwork Connectivity\n1GbE +
10GbE\n\n\nNetwork Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) BaseT for LAN\n 1 x RJ45 10/100/1000 (Gigabit) BaseT for LAN/WAN\n\n\n\n\nOther Connectors\n\n\n 1 x RJ-11\n 2 x USB 2.0\n\n\n\n\nUSB Applications\n3G/4G Sharing\n\n\nWired Protocols\n\n\n IPv4\n IPv6\n\n\n\n\nTotal LAN Connections\n5\n\n\nTotal WAN Connections\n1\n\n\n64 Bytes L3 Forwarding Performance\n\n\n\n512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\nWireless\n\n\nWireless Speed\nN/A\n\n\nWireless Protocols\nIEEE 802.11ac\n\n\nWireless Band\n\n\n\nFrequency\n\n\n\nOperation Channel\n\n\n\nWireless Transmitter Power\nN/A\n\n\nAntenna\n\n\n\n\n\n\n\nCore Features\n\n\nFeatures\nIPv6 Support\n\n\nRouter/Modem Processor\n\n\n\nInternal RAM Memory\n\n\n\nInternal RAM Memory Type\n\n\n\nInternal Flash Memory\n\n\n\nLED
Indicators\n\n\n\nButtons\n1 x Wireless On/Off Button\n\n\nOS Support\n\n\n Android\n iOS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\nMax. Power Consumption\n24 W\n\n\nPSU Type\n\n\n\n\n\n\n\nSecurity & VPN\n\n\nSecurity Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n QoS for critical operations\n\n\n\n\nFirewall/NAT\nNo\n\n\nManagement\n\n\n Configuration backup and restore\n DHCP\n FW Upgrade, Config Upl/Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\nVPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\nPhysical Specifications\n\n\nDimensions\n241 x 44 x 165 mm (WxHxD)\n\n\nWeight\n620 g\n\n\n\n\n\n\nAdditional Specifications\n\n\nNote\nN/A\n\n\n\n\n\n\nAdditional Information\n\n\nScan Code\nLN114199\n\n\nModel
Number\nV2865-K\n\n\nGTIN\n4710484741257\n\n\n\n
Availability: In Stock
£188.79

Product Description

VDSL & Ethernet Load Balancer\n The Vigor 2865 is a VDSL & Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management & more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN.\n Featuring high throughput with Load Balancing & Failover connectivity, suitable for handling Fibre to the Premises (FTTP) & Gigabit Internet connections. Offering up to 950 Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.\n\n Ideal VPN router for SMB\n A feature central to Dray Tek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices & branch offices back to HQ, or home-based/mobile teleworkers back to your office.\n The Vigor 2865 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput & up to 50 concurrently active VPN tunnels.\n I Psec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.\n\n Connect VPNs from behind NAT with Dray Tek's VPN Matcher\n A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.\n Dray Tek's new VPN Matcher service helps Dray Tek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two Dray Tek VPN routers that are behind NAT & could not normally establish a VPN tunnel.\n\n Connecting Remote Sites with LAN to LAN VPN\n Supporting up to 32 concurrently active VPN tunnels, the Vigor 2865 series is ideal for connecting multiple sites or home offices together with fast & secure IPsec VPN tunnels.\n Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing & seamless access to other resources & devices.\n\n Dray Tek SSL VPN for Dial-In Teleworkers & LAN to LAN\n The Vigor 2865 supports up to 16 active Dray Tek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote Dray Tek Vigor routers back to your main office using SSL/TLS technology
- the same encryption that you use for secure web sites such as your bank.\n Teleworkers can easily create a secure SSL VPN tunnel to the Dray Tek Vigor 2865 using the free Dray Tek Smart VPN Client app. Available for Windows, mac OS, Apple i OS (iPad, iPhone) & Android devices.\n\n 5+1 Gigabit LAN Ports with VLANs\n The Vigor 2865 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers & Network Attached Storage.\n With 5 dedicated LAN ports & one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.\n With Multiple LAN subnets & VLANs, the Vigor 2865 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private network. Each network with its own Content Filtering, Firewall, Quality of Service & Route Policy applied.\n The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the Dray Tek Vigor Switch G1080 8-port switch, for additional network ports.\n\n Designed for Central Management\n The Vigor 2865 series (along with most other Dray Tek routers, Access points & switches) can be centrally managed by our Vigor ACS central management platform.\n This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues.\n\n Robust & Comprehensive IPv 4 / IPv 6 Firewall\n Security is always taken seriously with Dray Tek routers. The firewall protects against attacks including Do S (Denial of Service) attacks, IP-based attacks & access by unauthorised remote systems. Wireless, Ethernet & VPN are also protected by various protection systems.\n The Dray Tek object-based firewall enables you to create combinations of Firewall rules & Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.\n The Vigor 2865 supports both IPv 4 & IPv 6 with Dual-Stack IPv 4/IPv 6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.\n\n Web Content Filtering with DNS Filter\n The content control features of the Vigor 2865 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal & according to time schedules.\n Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).\n Using the Global View service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.\n\n High Availability
- Hardware Failover\n For even greater resilience, the Vigor 2865 series provides High Availability (HA), with both a primary & secondary router able to provide connectivity to your network & subnets.\n In the event of the primary unit failing, the secondary unit will take its place on the network, automatically switching over to resume Internet, routing & VPN connectivity with no intervention required. This can remove the possibility of a single point of failure within your routers.\n\n Dray DDNS
- Dray Tek Dynamic DNS Address\n Dray Tek provides a free Dynamic DNS address to each Vigor 2865 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "myrouter.drayddns.com".\n This address automatically updates whenever the Internet connection's IP changes, so if one WAN&153;s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate & access your Vigor 2865 router. Just use the hostname to access the router's VPN services, management & any other services you have made accessible through the router.\n The Vigor 2865 can also authenticate your Dray DDNS hostname with free SSL/TLS certificates provided by Lets Encrypt, the router manages & automates the certificate process. Keeping the certificate up to date & ready for use with SSL VPN & other services.\n\n Quality of Service & Bandwidth Control\n Prioritise latency-sensitive applications on your network with Quality of Service.\n App Qo S simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom & Skype.\n Use 4 separate queues to give priority to servers & PCs (IP address), services such as Vo IP or DNS, or packet tagging used by IP phones with 802.1p & DSCP support\n Auto Voice VLAN allows the router to automatically prioritise Vo IP calls as they pass through the router without additional configuration.\n Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.\n\n Central AP & Switch Management\n The Vigor 2865 manages Dray Tek Vigor AP access points & Vigor Switch switches connected locally to the router. This enables you to centrally control, manage & administer multiple AP & Switch devices installed around your building/campus from just one router.\n\n Specifications\n\n\n\n\n Networking, Connectivity & Ports\n\n\n Model\n Dray Tek Vigor V2865-K\n\n\n Form-Factor\n Desktop\n\n\n Device Type\n N/A\n\n\n Compatible Internet Connections\n\n\n 3G via Compatible USB (Universal Serial Bus) Modems\n 4G via Compatible USB (Universal Serial Bus) Modems\n VDSL 2\n\n\n\n\n Network Connectivity\n 1 Gb E + 10 Gb E\n\n\n Network Ports\n\n\n 5 x RJ45 10/100/1000 (Gigabit) Base T for LAN\n 1 x RJ45 10/100/1000 (Gigabit) Base T for LAN/WAN\n\n\n\n\n Other Connectors\n\n\n 1 x RJ-11\n 2 x USB (Universal Serial Bus) 2.0\n\n\n\n\n USB Applications\n 3G/4G Sharing\n\n\n Wired Protocols\n\n\n IPv 4\n IPv 6\n\n\n\n\n Total LAN Connections\n 5\n\n\n Total WAN Connections\n 1\n\n\n 64 Bytes L3 Forwarding Performance\n\n\n\n 512+ Bytes L3 Forwarding Performance\n\n\n\n\n\n\n\n Wireless\n\n\n Wireless Speed\n N/A\n\n\n Wireless Protocols\n IEEE 802.11ac\n\n\n Wireless Band\n\n\n\n Frequency\n\n\n\n Operation Channel\n\n\n\n Wireless Transmitter Power\n N/A\n\n\n Antenna\n\n\n\n\n\n\n\n Core Features\n\n\n Features\n I Pv 6 Support\n\n\n Router/ Modem Processor\n\n\n\n Internal RAM Memory\n\n\n\n Internal RAM Memory Type\n\n\n\n Internal Flash Memory\n\n\n\n LED Indicators\n\n\n\n Buttons\n 1 x Wireless On/ Off Button\n\n\n OS Support\n\n\n Android\n i OS\n Mac OS\n Windows 10\n Windows 7\n Windows 8\n Windows 8.1\n Windows XP\n\n\n\n\n Max. Power Consumption\n 24 W\n\n\n PSU Type\n\n\n\n\n\n\n\n Security & VPN\n\n\n Security Protocols\n\n\n 3DES\n AES\n DES\n MPPE\n Qo S for critical operations\n\n\n\n\n Firewall/NAT\n No\n\n\n Management\n\n\n Configuration backup & restore\n DHCP\n FW Upgrade, Config Upl/ Dwl via Web GUI\n Local Management\n SSH\n\n\n\n\n VPN Support\n\n\n IPSec Pass-Through\n L2TP Pass-Through\n PPTP Pass-Through\n\n\n\n\n\n\n\n\n Physical Specifications\n\n\n Dimensions\n 241 x 44 x 165 mm (Wx Hx D)\n\n\n Weight\n 620 g\n\n\n\n\n\n\n Additional Specifications\n\n\n Note\n N/A\n\n\n\n\n\n\n Additional Information\n\n\n Scan Code\n LN114199\n\n\n Model Number\n V2865-K\n\n\n GTIN\n 4710484741257\n\n\n\n

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
Windows 8 - The latest version of the Microsoft operating system.
LAN - Local Area Network
RAM - Random Access memory
iPhone - A popular smartphone manufactured by Apple
RJ45 - A computer networking connection. A small square shaped connector.
Windows XP - A computer operating system from microsoft released in 2001
Date - A day on a calendar
Date - A social activity whith a current or potential partner
Button - A round or square object used for fastening clothing or other items
Filter - A device used to separate mixtures
Filter - An optical device to remove or enhance particular wavelengths of light.
button - A small fastener used on clothing to secure two pieces of fabric together.
PC - Personal Computer - an electronic device for acheiving multiple electronic tasks including word processing, emails and internet access
Cable - A series of wires bonded to form a single thread
Gigabit Ethernet - Also known as GbE or 1 GigE, a network standard which transfers date at one gigabit per second.
Office - A room where people work
speed - A measurement of how fast an object travels between two points
Day - The time it takes a planet or other space objects to complete one rotation.
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Network - A link and communication between things. Often computers or people.
USB - Universal Serial Bus. A method of connecting a device to a computer
Small - something that takes up less space than normal.
Normal - often relating to someone or something that is average.
Tunnel - a tunnel travels through an abject connecting one place to another.
Processor - A part of a computer or machine that processes functions,
Certificate - A document proving the truth of facts, for example a birth certificate.
Home - A place of permanent residence for families.
Estate - A group of houses on the same land or area.
Feature - An attribute that makes something stand out.
Primary - the beginning of something, of chief importance.
Wireless - A wire free device that uses radio and microwaves to send signals.
Skype - An online software application that allows users to call and use webcams for free over the internet.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Memory - A way to describe the way in which the brain can remember things.
Ideal - Something that satisfies a perfect criteria.
Environment - The conditions and surrounding area.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu