Trend H/JIG/C 2 Part Skeleton Hinge Jig Two part adjustable block portable template set designed for recessing hinges in wooden doors & frames with a router.

Features: It is easy to use with minimal setting-up time, completing the job both accurately & quickly Used on-site & in joinery shops to increase productivity with excellent results Fully adjustable apertures for fire door requirements & renovation work Idea for fitting a new door in an old frame No need for marking out in the conventional way Quick & simple to set-up as the hinge is used as the pattern Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges Use with a light duty plunge router with 1/4 inch collet Long reach router cutter required, 12mm diameter with 70mm overall length Adjustable edge guides with preset for hinge of 20mm, 25mm & 30mm Unibase may be needed Patent No. GB2285410, GB1106608.1 T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160 Comes with: 3 x Hinge sliding aperture block assemblies 4 x Bradawls (short blade) 1 x 16mm guide bush 1 x Carry case

...

Trend H150 Toggle Clamp 6 X 2

Features: Ideal for securing workpiece either onto jigs or to the surface of

...

Trend H75 Toggle Clamp 4 X 1 1/2

Features: Ideal for securing workpiece either onto jigs or to the surface

...

Trend HINGE/JIG Hinge Recessing Jig complete with apertures, bradawls with spacer, 16mm guide bush, T-Handle hex key, 4mm spacing gauge & plastic storage tube

Features: The Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames It is easy to use with minimal setting-up time, completing the job both accurately & quickly Used on-site & in joinery shops to increase productivity with excellent results Four apertures for fire door requirements No need for marking out in the conventional way Quick & simple to set-up as the hinge is used as the pattern Clean & accurate recesses are achieved every time Suitable for timber based doors & square butt hinges Use with a light duty router with 1/4 inch collet Long reach router cutter required, 12mm diameter with 70mm overall length Angled position slots to prevent creep T4EK router requires a ref. UNIBASE Comes with: 4 x Apertures 2 x Bradawls with spacer 1 x 16mm guide bush 1 x T-Handle hex key 1 x 4mm spacing gauge 1 x Plastic storage tube

...

Trend HK/SET/A Mini Hex Key Set

Features: Mini hex key set Metric sizes from 0.7mm to 3mm Imperial sizes from

...

Trend HR/JIG Hot Rod Jig Trend HR/JIG Hot Rod Jig for routing grooves in solid work tops to accept 12mm diameter hot rods. Hot rods prevent heat damage to work surface

Features: Accepts hot rods of size 100mm, 200mm, 300mm & 400mm Made from 12mm hard wearing CNC machined solid phenolic plastic. Grooves at 50mm pitch. Series of peg holes at 50mm increments too allow recess at 90 degree to work surface or at 45 degree. Use Ref. C054AX1/2TC, R6.35mm cove (12.7mm diameter) for standard 12.7mm rods, or Ref. C053CX1/2TC, R6mm cove (12mm diameter) for 12mm rods. Use other cove cutters for other rod diameters. It is desirable to recess the rods into the worktop by Approx. one third to one half of the rod diameter. Hot rods not included.   Groove pitch: 50.0 mm Groove length: 100, 200, 300 & 400 mm Length: 700 mm

Width: 390 mm Thickness: 12 mm Weight: 3.5kg  



...

Trend INS/W6/10 Insert For Wood M6 10

Features: Threaded inserts for fixings in woods, man-made boards & fibre

...

Trend KFP/1 Kitchen Fitters Router Cutters (Pack of 3) Three piece kitchen fitters router cutter pack containing three 1/2 inch shank worktop cutters supplied in a storage case. Tungsten Carbide Tipped (TCT) for abrasive materials such as chipboard, MDF, plywood & hardwoods. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops.

Features: 3 piece cutter pack aimed at kitchen fitters Tungsten carbide tipped 2 flute Warranty: 12 months Comes With: 3 x Worktop cutter 1/2in Heavy duty storage case [https://www.youtube.com/watch?v=GKtzzm 6G3tg]   Straight two flute D: 12.7 mm x 50mm cut Shank Diameter: 1/2 inch

...

Trend KFP/3/83D Kitchen Fitters Pack 3/83d X 5 Pieces (Shank Diameter 1/2")

Features: Five piece cutter

...

Trend KWJ700 KWJ700 Kitchen Worktop Jig 700mm The Trend KWJ700 Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Trade all in one jig for joining worktops up to 700mm wide with a router.

Features: Left hand & right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole & 3/4inch BSP hole for mixer taps Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm & 700mm wide worktops Cuts up to 40mm thick worktops with or without anti-drip postformed edge Three open-ended bolt recesses (dog bone style) for 150mm bolts Engraved lines for short 65mm bolts & worktop cross-cut 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up Engraved markings for identification of pin holes Pins made from ABS plastic for strength 9 Functions: Female cut Male cut Connector bolt recess Curved peninsular 45° end cut R40mm corner radius R100mm corner radius 45° mitre corner joint 35mm circular hinge & 3/4" BSP hole Comes with: 6 x ABS Plastic Pins Jig requires: A portable plunge router with 12.7mm (1/2 inch) shank capacity & minimum 1300 watts A template guide bush with 30mm outside diameter A TCT router cutter with 12.7mm (1/2 inch) diameter & 50mm (2 inch) cut length Two clamps

...