Trend GRAB/SE1/SET Damaged Screw & Bolt Remover Set This versatile double-ended bit removes damaged screws, machine screws & broken bolts from wood, metal & plastic. It can remove screw sizes from Nos. 6
- 14 & broken bolts from size M4
- M8. Removes cleanly from wood, metal or plastic. Hardened tool steel. Removes screws made from any alloy including soft brass. Removes free spinning screws. Winslow tip for self centring.

Features: Wood screw remover For use with a reversible drill to remove damaged or rounded off screw heads Can be used in Snappy Quick chucks or directly in a standard chuck Can be used on Pozi, Phillips, Slotted, Hexagon, Torx, Tri-wing, Frearson & most Tamper Resistant Screws Double-ended (burnisher & tapered thread). Serrated extracting end of tool results in greater torque for hard to remove screws. Hex shoulder to aid removal of jammed screw or bolt. Patent Nos. WO2004002687 & US6, 761, 089 Set of two size No.2 & No.3.  



...

Trend H/JIG/A 2-Piece Hinge Jig complete with apertures, bradawls with spacer, 16mm guide bush, T-Handle hex key, 4mm spacing gauge & fabric storage case The Hinge Jig H/JIG/A is a 2-piece portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly.

Features: Used on-site & in joinery shops to increase productivity with excellent results Four apertures for fire door requirements No need for marking out in the conventional way Quick & simple to set-up as the hinge is used as the pattern Clean & accurate recesses are achieved every time Suitable for timber based doors & square butt hinges Use with a light duty router with 1/4 inch collet Long reach router cutter required, 12mm diameter with 70mm overall length Angled position slots to prevent creep Jig thickness allows it to be used on frames with a maximum 25mm thick fixed stop fitted Also suitable for fire doors T4EK router requires a UNIBASE Comes with: 4 x Apertures 2 x Bradawls with spacer 1 x 16mm guide bush 1 x T-Handle hex key 1 x 4mm spacing gauge 1 x Fabric storage case

...

Trend H/JIG/C 2 Part Skeleton Hinge Jig Two part adjustable block portable template set designed for recessing hinges in wooden doors & frames with a router.

Features: It is easy to use with minimal setting-up time, completing the job both accurately & quickly Used on-site & in joinery shops to increase productivity with excellent results Fully adjustable apertures for fire door requirements & renovation work Idea for fitting a new door in an old frame No need for marking out in the conventional way Quick & simple to set-up as the hinge is used as the pattern Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges Use with a light duty plunge router with 1/4 inch collet Long reach router cutter required, 12mm diameter with 70mm overall length Adjustable edge guides with preset for hinge of 20mm, 25mm & 30mm Unibase may be needed Patent No. GB2285410, GB1106608.1 T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160 Comes with: 3 x Hinge sliding aperture block assemblies 4 x Bradawls (short blade) 1 x 16mm guide bush 1 x Carry case

...

Trend H150 Toggle Clamp 6 X 2

Features: Ideal for securing workpiece either onto jigs or to the surface of

...

Trend H75 Toggle Clamp 4 X 1 1/2

Features: Ideal for securing workpiece either onto jigs or to the surface

...

Trend HK/SET/A Mini Hex Key Set

Features: Mini hex key set Metric sizes from 0.7mm to 3mm Imperial sizes from

...

Trend HOSE/BAY/STEP Hose Bayonet Stepped 33/48-39/54

Features: Ideal when a custom connection is required Can

...

Trend HR/JIG Hot Rod Jig Trend HR/JIG Hot Rod Jig for routing grooves in solid work tops to accept 12mm diameter hot rods. Hot rods prevent heat damage to work surface

Features: Accepts hot rods of size 100mm, 200mm, 300mm & 400mm Made from 12mm hard wearing CNC machined solid phenolic plastic. Grooves at 50mm pitch. Series of peg holes at 50mm increments too allow recess at 90 degree to work surface or at 45 degree. Use Ref. C054AX1/2TC, R6.35mm cove (12.7mm diameter) for standard 12.7mm rods, or Ref. C053CX1/2TC, R6mm cove (12mm diameter) for 12mm rods. Use other cove cutters for other rod diameters. It is desirable to recess the rods into the worktop by Approx. one third to one half of the rod diameter. Hot rods not included.   Groove pitch: 50.0 mm Groove length: 100, 200, 300 & 400 mm Length: 700 mm

Width: 390 mm Thickness: 12 mm Weight: 3.5kg  



...

Trend INS/W6/10 Insert For Wood M6 10

Features: Threaded inserts for fixings in woods, man-made boards & fibre

...

Trend KFP/1 Kitchen Fitters Router Cutters (Pack of 3) Three piece kitchen fitters router cutter pack containing three 1/2 inch shank worktop cutters supplied in a storage case. Tungsten Carbide Tipped (TCT) for abrasive materials such as chipboard, MDF, plywood & hardwoods. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops.

Features: 3 piece cutter pack aimed at kitchen fitters Tungsten carbide tipped 2 flute Warranty: 12 months Comes With: 3 x Worktop cutter 1/2in Heavy duty storage case [https://www.youtube.com/watch?v=GKtzzm 6G3tg]   Straight two flute D: 12.7 mm x 50mm cut Shank Diameter: 1/2 inch

...