More From Contributor

£6.00
Trend HK/SET/A Mini Hex Key Set

Features:
Mini hex key set Metric sizes from 0.7mm to 3mm Imperial sizes from

...
Archived Product
£12.00
Trend HOSE/BAY/STEP Hose Bayonet Stepped 33/48-39/54

Features:
Ideal when a custom connection is required Can

...
Archived Product
£40.00
Trend HR/JIG Hot Rod Jig Trend HR/JIG Hot Rod Jig for routing grooves in solid work tops to accept 12mm diameter hot rods. Hot rods prevent heat damage to work surface

Features:
Accepts hot rods of size 100mm, 200mm, 300mm & 400mm Made from 12mm hard wearing CNC machined solid phenolic plastic. Grooves at 50mm pitch. Series of peg holes at 50mm increments too allow recess at 90 degree to work surface or at 45 degree. Use Ref. C054AX1/2TC, R6.35mm cove (12.7mm diameter) for standard 12.7mm rods, or Ref. C053CX1/2TC, R6mm cove (12mm diameter) for 12mm rods. Use other cove cutters for other rod diameters. It is desirable to recess the rods into the worktop by Approx. one third to one half of the rod diameter. Hot rods not included.   Groove pitch: 50.0 mm Groove length: 100, 200, 300 & 400 mm Length: 700 mm

Width:
390 mm Thickness: 12 mm Weight: 3.5kg  



...
Archived Product
£4.91
Trend INS/W6/10 Insert For Wood M6 10

Features:
Threaded inserts for fixings in woods, man-made boards & fibre

...
Archived Product
£36.00
Trend KFP/1 Kitchen Fitters Router Cutters (Pack of 3) Three piece kitchen fitters router cutter pack containing three 1/2 inch shank worktop cutters supplied in a storage case. Tungsten Carbide Tipped (TCT) for abrasive materials such as chipboard, MDF, plywood & hardwoods. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops.

Features:
3 piece cutter pack aimed at kitchen fitters Tungsten carbide tipped 2 flute Warranty: 12 months Comes With: 3 x Worktop cutter 1/2in Heavy duty storage case [https://www.youtube.com/watch?v=GKtzzm 6G3tg]   Straight two flute D: 12.7 mm x 50mm cut Shank Diameter: 1/2 inch

...
Archived Product
£84.00
Trend KWJ700 KWJ700 Kitchen Worktop Jig 700mm The Trend KWJ700 Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Trade all in one jig for joining worktops up to 700mm wide with a router.

Features:
Left hand & right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole & 3/4inch BSP hole for mixer taps Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm & 700mm wide worktops Cuts up to 40mm thick worktops with or without anti-drip postformed edge Three open-ended bolt recesses (dog bone style) for 150mm bolts Engraved lines for short 65mm bolts & worktop cross-cut 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up Engraved markings for identification of pin holes Pins made from ABS plastic for strength 9 Functions: Female cut Male cut Connector bolt recess Curved peninsular 45° end cut R40mm corner radius R100mm corner radius 45° mitre corner joint 35mm circular hinge & 3/4" BSP hole Comes with: 6 x ABS Plastic Pins Jig requires: A portable plunge router with 12.7mm (1/2 inch) shank capacity & minimum 1300 watts A template guide bush with 30mm outside diameter A TCT router cutter with 12.7mm (1/2 inch) diameter & 50mm (2 inch) cut length Two clamps

...
Archived Product
£132.00
Trend KWJ900 Kitchen Worktop Jig (900mm) The Trend KWJ900 Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Trade all in one jig for joining worktops up to 900mm wide with a router.

Features:
Left hand & right hand corners, 400mm radius penisular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole & 3/4inch BSP hole for mixer taps Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm & 900mm wide worktops Cuts up to 40mm thick worktops with or without anti-drip postformed edge Three open-ended bolt recesses (dog bone style) for 150mm bolts Engraved lines for short 65mm bolts & worktop cross-cut 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up Engraved markings for identification of pin holes Comes with pins made from ABS plastic for strength 9 Functions: Female cut Male cut Connector bolt recess Curved peninsular 45° end cut R40mm corner radius R100mm corner radius 45° mitre corner joint 35mm circular hinge & 3/4" BSP hole

...
Archived Product
£17.23
Trend LOC/BLK/PK1 Loc Block Support Pack (anti Slip)

Features:
Trend Loc block workpiece Pack of four interlocking

...
Archived Product
£92.00
Trend LOCK/JIG Lock Jig complete with guide bush collar, face plate templates & mortise templates

Features:


...
Archived Product
£99.00
Trend LOCK/JIG/B Adjustable Trade Lock Jig This Trend Adjustable Trade Lock Jig has adjustable sliding inserts to allow faceplate & mortise recesses for popular size door locks to be routed with a plunge router. It is quick & easy to set up using engraved lines for lock size & door sizes. It provides fast, clean & accurate results on doors even in hardwood. Deeper mortises can be achieved with a suitable size of auger bit. This lock jig is made from a Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm.

Features:
Fully adjustable for lock face plate length up to 250mm. Quick & easy to set up using engraved lines for lock size & door sizes Fast, clean & accurate results on doors even in hardwood Engraved for 16mm & 19mm lock width & 22.5mm & 25.4mm face plate widths Measuring required for other lock widths Engraved on underside to allow set up for 35mm, 40mm, 44mm & 54mm door widths Deeper mortises can be achieved with a suitable size of auger bit Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm   Comes With: 2 x setting block Door thickness min.: 30 mm Door thickness max.: 80 mm Faceplate length min.: 30 mm Faceplate length max.: 250mm Face Plate Dimension Engraved Widths: 22.5 mm and 25.4 mm (1 inch) Mortise Dimension Engraved Widths: 16 mm (5/8 inch) & 19 mm (3/4 inch)

...
Archived Product

Trend KFP/3/83D Kitchen Fitters Pack 3/83d X 5 Pieces (Shank Diameter
1/2")

Trend KFP/3/83D Kitchen Fitters Pack 3/83d X 5 Pieces (Shank Diameter 1/2") Features: Five piece cutter pack aimed at kitchen fitters For kitchen worktop routing Cutters have Tungsten Carbide centre tip Superior quality for long life on natural and man made boards Warranty: 12 months Comes with: 5 x 3/83DX1/2TC D:1/2 inch D:12.7 mm C:50 mm OL:99 mm Shank Diameter:1/2 inch Nett Weight: 0.078kg Packaged Size: 218x150x40mm
RIP - This product is no longer available on our network. It was last seen on 21.11.2018

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: TRE-KFP-slash-3-slash-83D
Availability: In Stock
£100.00

Product Description

Trend KFP/3/83D Kitchen Fitters Pack 3/83d X 5 Pieces (Shank Diameter 1/2")

Features:
Five piece cutter pack aimed at kitchen fitters For kitchen worktop routing Cutters have Tungsten Carbide centre tip Superior quality for long life on natural & man made boards Warranty: 12 months Comes with: 5 x 3/83DX1/2TC D:1/2 inch D:12.7 mm C:50 mm OL:99 mm Shank Diameter:1/2 inch Nett Weight: 0.078kg Packaged

Size:
218x 150x 40mm

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Inch - Equivalent to approximately 2.5cm
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Quality - An object that has quality is superior in function and finish than a less quality object.
Size - is the measurement of how big an object is in space.
Natural - not manmade
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu