More From Contributor

Trend SM/TSP Scribemaster Pro Tenon Slide Plate Tenon slide plate for use with the Scribemaster Pro. Used to cut through housing, half lap & tongue & groove lining joints.

Features: Plate is locked in position on jig & allows through housing, half lap (halving) & tongue & groove lining joints etc. to be routed. Use with a 30mm guide bush & suitable straight cutter. Maximum cutter diameter 22mm. Comes with: 1 x Tenon plate 1 x Clamp bar 1 x Hex key 4mm / 5mm Max. working length: 190 mm Max. tenon length adj: 50 mm Max. cutter dia: 22 mm

...

Archived Product

Trend SMC/02 Scribemaster Pro Cutter 4 x 40 x 100 x 1/4 Inch Shank HSS Replacement cutter for use with the Scribemaster Pro. Made from a single piece of High Speed Steel, ground with a very fine edge. Suitable for non-abrasive natural timbers & plastics. Will give a superior finish in soft timbers.

Features: For softwood & MDF Single flute up cut spiral for clean finish Made from Super High Speed Steel that allows flute to be ground to a very fine cutting edge Cutting Diameter: 4 mm Cutting Length: 40 mm Overall Length: 100 mm Shank Diameter 1/4 inch Weight: 0.1kg

...

Archived Product

Trend SMC/03 Scribemaster Pro Cutter 4 x 40 x 90mm x 8mm Shank HSS Accessory cutter for use with the Scribemaster Pro. Made from a single piece of High Speed Steel, ground with a very fine edge. Suitable for non-abrasive natural timbers & plastics. Will give a superior finish in soft timbers.

Features: For hardwood. Two flute down cut spiral for clean finish. Made from Super High Speed Steel that allows flute to be ground to a very fine cutting edge. Cutting Diameter: 4 mm Cutting Length: 40 mm Overall Length: 90 mm Shank Diameter: 8 mm Weight: 0.1kg

...

Archived Product

Trend SNAP/ASA/2 Trend Snappy Angle Screwdriver Attachment Mark 2 (Shank Diameter 1/4 Hex)

Features: 90 degree

...

Archived Product

Trend SNAP/BH/11 Trend Snappy 25mm Bit Holder 279mm (11 Inch) (Shank Diameter 1/4 Hex")

Features: Extra

...

Archived Product

Trend SNAP/BH/6 Trend Snappy 25mm Bit Holder 152mm (6 Inch) (Shank Diameter 1/4 Hex")

Features: Extra long

...

Archived Product

Trend SNAP/BH/M Snappy 66mm Magnetic Bit Holder The Trend SNAP/BH/M Snappy 66mm Magnetic Bit Holder is designed for micro bit holders with small 10.8mm diameter body & spring locator for positive securing of bit.

Features: Micro diameter body Small 10.8mm diameter to allow access into tighter spaces Pull back ring to release bits, spring-loaded release of bit Tested to 50 Nm torque Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw Stainless steel housing

...

Archived Product

Trend SNAP/BH/M/A Snappy Extra Long Micro Bit Holder (150 X 10.8mm) The Trend Snap/BH/M/A Snappy micro magnetic bit holder for 1/4-inch hex 25mm insert bits. This bit holder is longer than others in the range with an overall length of 150mm.

Features: Extended length of shaft at 150mm long Micro diameter body Small 10.8mm diameter to allow access into tighter spaces Pull back ring to release bits, spring-loaded release of bit Tested to 50 Nm torque Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw Stainless steel housing

...

Archived Product

TTrend SNAP/BH/OT Snappy One Touch Bit Holder 66mm The Trend SNAP/BH/OT is a 66mm long magnetic holder for 25mm insert bits.

...

Archived Product

Trend SNAP/BH/OT/A Snappy One Touch Bit Holder 150mm The Trend SNAP/BH/OT/A is a 150mm long magnetic holder for 25mm insert bits.

Features: One touch quick & easy release of insert bit Small 10.3mm diameter to allow access into tighter spaces Pressing the button will allow the bit to be sprung forward for easy removal Tested to 50 Nm torque Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw Stainless steel housing

...

Archived Product

Trend SNAP/BH/58 Trend Snappy 25mm Bit Holder 58mm (Shank Diameter 1/4
Hex")

Trend SNAP/BH/58 Trend Snappy 25mm Bit Holder 58mm (Shank Diameter 1/4 Hex") Features: Magnetic holder for 25mm insert bits Quick and easy to use Warranty: 12 months D:9.4 mm Overall length:58 mm Shank Length:1/4 inch hex Nett Weight: 0.022kg Packaged Size: 150x80x18mm

Availability: Out Of Stock
Supplier: Toolstop
SKU: TRE-SNAP-slash-BH-slash-58

Description Reviews / Comments Add New

Product Description

Reviews/Comments

Add New

Jargon Buster

Diameter - A measurement across a circle passing through the middle

Inch - Equivalent to approximately 2.5cm

Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new

magnetic - A susbstance affected at a microscopic level by an applied magnetic field.

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

Size - is the measurement of how big an object is in space.

Quick - Something that is fast

Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.

More From Contributor

Trend SNAP/BH/58 Trend Snappy 25mm Bit Holder 58mm (Shank Diameter 1/4
Hex")

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account