More From Contributor

Trend SM/MKP Scribemaster Pro Quick Mount Kit Chop saw stand mounting kit for the Scribemaster Pro. The bench mount kit is designed to work with a variety of mitre saw stands when fitted with mounting brackets. Comes With: 4 x Stepped bush 4 x Coach bolt M8 8 x Nut M8 Weight: 0.5kg ...

Archived Product

Trend SM/PRO Scribe Master Pro Scribing Jig The Trend Scribe Master Pro is perfect for fast, efficient & accurate scribes every time. Designed & made in the UK with a patented design, it will quickly mount on to your mitre saw stand with the optional mount kit or can be used stand alone. How it works: Steel combs are pushed in to the sample mould Comb assembly is then turned over to give a scribe Copy pin then follows the scribecontour allowing the router cuttern to cut the scribe

Features: Can cut any skirting or dado profile Cuts left & right hand scribes Scribes warped boards For use with 1/4" or 1/2" routers Up to 10 times faster than manual scribes Quick & easy to set up & use Pre assembled & ready for use Precisie cuts every time Made from High Pressure Laminate for stability Comes with: 4mm x 1/4" shank HSSE single flute spiral for softwood & MDF Comb alignment tool Workpiece clamp knob

...

Archived Product

Trend SM/TSP Scribemaster Pro Tenon Slide Plate Tenon slide plate for use with the Scribemaster Pro. Used to cut through housing, half lap & tongue & groove lining joints.

Features: Plate is locked in position on jig & allows through housing, half lap (halving) & tongue & groove lining joints etc. to be routed. Use with a 30mm guide bush & suitable straight cutter. Maximum cutter diameter 22mm. Comes with: 1 x Tenon plate 1 x Clamp bar 1 x Hex key 4mm / 5mm Max. working length: 190 mm Max. tenon length adj: 50 mm Max. cutter dia: 22 mm

...

Archived Product

Trend SMC/02 Scribemaster Pro Cutter 4 x 40 x 100 x 1/4 Inch Shank HSS Replacement cutter for use with the Scribemaster Pro. Made from a single piece of High Speed Steel, ground with a very fine edge. Suitable for non-abrasive natural timbers & plastics. Will give a superior finish in soft timbers.

Features: For softwood & MDF Single flute up cut spiral for clean finish Made from Super High Speed Steel that allows flute to be ground to a very fine cutting edge Cutting Diameter: 4 mm Cutting Length: 40 mm Overall Length: 100 mm Shank Diameter 1/4 inch Weight: 0.1kg

...

Archived Product

Trend SMC/03 Scribemaster Pro Cutter 4 x 40 x 90mm x 8mm Shank HSS Accessory cutter for use with the Scribemaster Pro. Made from a single piece of High Speed Steel, ground with a very fine edge. Suitable for non-abrasive natural timbers & plastics. Will give a superior finish in soft timbers.

Features: For hardwood. Two flute down cut spiral for clean finish. Made from Super High Speed Steel that allows flute to be ground to a very fine cutting edge. Cutting Diameter: 4 mm Cutting Length: 40 mm Overall Length: 90 mm Shank Diameter: 8 mm Weight: 0.1kg

...

Archived Product

Trend SNAP/BH/11 Trend Snappy 25mm Bit Holder 279mm (11 Inch) (Shank Diameter 1/4 Hex")

Features: Extra

...

Archived Product

Trend SNAP/BH/58 Trend Snappy 25mm Bit Holder 58mm (Shank Diameter 1/4 Hex")

Features: Magnetic holder

...

Archived Product

Trend SNAP/BH/6 Trend Snappy 25mm Bit Holder 152mm (6 Inch) (Shank Diameter 1/4 Hex")

Features: Extra long

...

Archived Product

Trend SNAP/BH/M Snappy 66mm Magnetic Bit Holder The Trend SNAP/BH/M Snappy 66mm Magnetic Bit Holder is designed for micro bit holders with small 10.8mm diameter body & spring locator for positive securing of bit.

Features: Micro diameter body Small 10.8mm diameter to allow access into tighter spaces Pull back ring to release bits, spring-loaded release of bit Tested to 50 Nm torque Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw Stainless steel housing

...

Archived Product

Trend SNAP/BH/M/A Snappy Extra Long Micro Bit Holder (150 X 10.8mm) The Trend Snap/BH/M/A Snappy micro magnetic bit holder for 1/4-inch hex 25mm insert bits. This bit holder is longer than others in the range with an overall length of 150mm.

Features: Extended length of shaft at 150mm long Micro diameter body Small 10.8mm diameter to allow access into tighter spaces Pull back ring to release bits, spring-loaded release of bit Tested to 50 Nm torque Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw Stainless steel housing

...

Archived Product

Trend SNAP/ASA/2 Trend Snappy Angle Screwdriver Attachment Mark 2
(Shank Diameter 1/4 Hex)

Trend SNAP/ASA/2 Trend Snappy Angle Screwdriver Attachment Mark 2 (Shank Diameter 1/4 Hex) Features: 90 degree angled screwdriver attachment allows access to tight corners Quick change chuck ensure tool is held securely Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks Two position handle for maximum control Heat treated steel precision gears for maximum torque Die cast head with ball bearing guides for stability. Use in cordless and corded drills Can be used with impact screwdrivers with following specification - maximum 12v, maximum torque 80nm (816 kgf.cm), rotation 0-2000 rpm and 0-2500 impacts per min Maximum 60 Nm torque (612 kgf cm) Do not use with nut drivers Warranty: 12 months Comes With: 1 x No 2 Pozi 50mm screwdriver bit 1 x No
2 Pozi 25mm screwdriver insert bit

Availability: Out Of Stock
Supplier: Toolstop
SKU: TRE-SNAP-slash-ASA-slash-2

Description Reviews / Comments Add New

Product Description

Trend SNAP/ASA/2 Trend Snappy Angle Screwdriver Attachment Mark 2 (Shank Diameter 1/4 Hex)

Features: 90 degree angled screwdriver attachment allows access to tight corners Quick change chuck ensure tool is held securely Use with bit holders, direct drive or insert screwdriver bits, hex drills & drill/countersinks Two position handle for maximum control Heat treated steel precision gears for maximum torque Die cast head with ball bearing guides for stability. Use in cordless & corded drills Can be used with impact screwdrivers with following

Specification
- maximum 12v, maximum torque 80nm (816 kgf.cm), rotation 0-2000 rpm & 0-2500 impacts per min Maximum 60 Nm torque (612 kgf cm) Do not use with nut drivers Warranty: 12 months Comes With: 1 x No 2 Pozi 50mm screwdriver bit 1 x No 2 Pozi 25mm screwdriver insert bit

Reviews/Comments

Add New

Jargon Buster

Diameter - A measurement across a circle passing through the middle

Steel - An alloy made predominately of Iron combined with <2% carbon

Heat - A term used to define thermal energy

Cm - Centimetres, one centimetre is equal to 10 milimetres

Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new

screwdriver - A tool for driving screws. May be rotated manually or by electric motor.

Die Cast - A metal casting process which forces hot metal into a cavity to form an object shape

Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.

RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.

rotation - A circular motion of an object around a central axis

Quick - Something that is fast

Tight - The opposite to loose

Specification - A description of a product with the details of its attributes.

Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.

Degree - An angle measurement, also can be the measurement of an extent that something happens, can also relate to an university academic measurement.

degree - The extremity of something or the angle. Can also relate to a university achievement.

Head - The upper part of a body typically separated by the neck.

Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

More From Contributor

Trend SNAP/ASA/2 Trend Snappy Angle Screwdriver Attachment Mark 2
(Shank Diameter 1/4 Hex)

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account