The NZXT H210 is the successor of the H200 Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is less under tension THE FEATURES OF THE NZXT H210 MINI-ITX ENCLOSURE AT A GLANCEMini-ITX package from NZXT in blackred Two Aer F120 fans pre-installed Large side window made from tempered glass Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210 MINI-ITX CASE WITH TEMPERED GLASSNZXT once again relies on a proven design with smooth outer surfaces & a minimalist aesthetic for the H210 Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip & easier access to the inside of the computer OPTIONS FOR AIR & WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover & on the back The fans ensure adequate aiflow Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present & 42 millimetres in the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 59kg Color Black (outer panels chassis) red (cable cover accents) Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) front) (1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) lid) Filter front bottom Radiator mountings 1x 240 mm (front side)1x 120 mm (rear) Drive bays 1x 35 25 inch (internal)3x 25 inch (internal) Power supply 1x standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Back side 42 mm Scope of delivery 1x NZXT H2101x set mounting screws 10x cable ties 1x headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pole) Manufacturer warranty 2 years

...

The NZXT H210 is the successor of the H200 Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is less under tension THE FEATURES OF THE NZXT H210 MINI-ITX ENCLOSURE AT A GLANCEMini-ITX package from NZXT in white Large side window made from tempered glass Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210 MINI-ITX CASE WITH TEMPERED GLASSNZXT once again relies on a proven design with smooth outer surfaces & a minimalist aesthetic for the H210 Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip & easier access to the inside of the computer OPTIONS FOR AIR & WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover & on the back The fans ensure adequate aiflow Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present & 42 millimetres in the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 59kg Color White (outer panels cable cover) black (chassis accents) Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) front) (1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) lid) Filter front bottom Radiator mountings 1x 240 mm (front side)1x 120 mm (rear) Drive bays 1x 35 25 inch (internal)3x 25 inch (internal) Power supply 1x standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Back side 42 mm Scope of delivery 1x NZXT H2101x set mounting screws 10x cable ties 1x headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pole) Manufacturer warranty 2 years

...

The NZXT H210i is the successor of the H200i Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is under less total tension In addition NZXT has installed a Smart Device V2 to control fans & RGB LED accessories & has also refreshed the front panel with new connectivity options THE FEATURES OF THE NZXT H210I-MINI-ITX PACKAGE AT A GLANCEMini-ITX package from NZXT in blackred Integrated controller for fan & RGB-LEDs Two Aer F120 fans pre-installed Large side window made from tempered glass
Includes: addressable NZXT HUE 2 RGB-LED strip Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210I MINI-ITX CASE WITH TEMPERED GLASSNZXT has opted for the tried & tested shape of the H210i's predecesssor with smooth outer surfaces & attractive proportions Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four knurled screws On the NZXT H210i on the other hand the side surface is completely flat A single thumbscrew on the back of the case provides a secure grip & easier access to the inside of the computer As a special feature the NZXT H210i mini tower has an integrated controller with NZXT CAM support called the Smart Device V2 It is used to control the pre-installed NXZT Aer F fans & the NXZT HUE 2 RGB-LED strips included with the case which are visible through the tempered glass window A total of nine fans can be connected to the three PWM connectors via Y-cables The RGB connectors together support four HUE 2 strips or up to five NZXT Aer RGB fans An acoustic sensor helps to determine the optimum balance between cooling & noise The system is controlled via the feature-rich software on the PC AIR & WATER COOLING OPTIONSIf you rely on traditional air cooling the NZXT H210i offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan each For CPU coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower as standard with in-house fans from the Aer series A black 120 model is pre-installed in the cover & on the back The fans ensure a plentiful supply of fresh air Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 mm radiator In addition a 120 heat exchanger can be installed on the rear wall In the front 85 millimetres of space are provided along with 42 millimetres on the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWARE COMPONENTSThe interior of the NZXT H210i is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters long Like its predecessors the NZXT H210i has no external drive bays Internally however a quite large number of storage drives can be installed Under the power supply cover a 35 inch hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive should you prefer Behind the motherboard tray there is space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch hard disk Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available for discretely stowing away unsightly cables Technical Details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 6kg Colour Black (outer panels chassis) Red (cable cover trim) Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover) Pre-installed 1x 120 mm Aer F120 (1200 RPM 8566 m&179;h 28 d B (A) Rear)1x 120 mm Aer F120 (1200 RPM 8566 m&179;h 28 d B (A) Roof) Filter Front bottom Radiator Mountings 1x 240 mm (front)1x 120 mm (rear) Drive Bays 1x 35 25 (internal)3x 25 (internal)PSU 1x Standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Smart Device V2 Connections 3x 4-pin PWM (max 10W per channel)2x 4-pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-pin internal)1x SATA current Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Rear 42 mm Accessories 1x NZXT H210i 1x Set mounting screws 10x Cable ties 1x Headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pin) Manufacturer warranty 2 years


...

Taking feedback from the community NZXT has applied highly requested feature updates to its acclaimed H440 case with a renewed emphasis on cooling performance & function The new H Series Chassis from NZXT features a doorless ODD-free front panel made entirely of steel while a large full-view window reveals an interior specially engineered to make any build seamless & beautiful This case puts a firm emphasis on the ethos of clean computer builds Every design characteristic has been considered to assist even novice system builders in creating showcase level systems On the inside an integrated power supply shroud completely conceals cables & increases cable management space up to 80 in addition two attached SSD trays mounted above the shroud allow you to easily showcase a remarkably clean interior The H440 comes standard with 360mm of direct CPUGPU cooling behind its front panel offering an unprecedented level of cooling right out of the box Supporting both 140mm & 120mm fans the steel top & front panels come ready for up to 360mm water cooling radiators to offer comprehensive water cooling performance in a sleek minimalist package With its newly designed interior the H440 guarantees a streamlined PC-building experience without sacrificing any features that builders demand in a high performance chassis Features
- Increased height & depth with re-designed ventilation for better airflow
- PWM fan hub
- 8 x SSD storage
- HDD trays re-designed to support top & bottom mounted drives
- Tinted black window
- Newly upgraded scratch resistant paint Technical Details
- Model Number CA-H442W-W1
- Colour White & Black
- Drive Bays External 525" 0 Internal 35"25" 10 18 (Total 7 Combined)
- Cooling System Front 2x 1403x 120mm (3 x 120mm FN V2 Fans Included) Top 2x 1403x 120mm Rear 1x 140120mm (1 x 140mm FN V2 Fan Included)
- Filters Front (Included) Bottom Rear (Included)
- Radiator Support Front 2 x 140 or 3 x 120mm Top 2 x 140 or 3 x 120mm Rear 1 x 140120mm
- Clearance GPU Clearance With HDD Cage 294mm GPU Clearance Without HDD Cage 428mm CPU Cooler 180mm
- Cable Management Lowest Point
- 177mm; Highest Point 325mm
-

Dimensions 220mm x 512mm x 480mm
- Material Steel Plastic Metal plated front panel
- Motherboard Support Mini-ITX Micro ATX ATX
- Expansion Slots 7
- External Electronics USB30 x 2 USB20 x 2 1 x Audio Mic IO Panel LED On Off
- Product Weight 1016 kg
- Warranty 2 Years Case type Midi-Tower Form Factor ATX Micro-ATX Mini-ITX Side panel Windowed Colour White Main colour White Accent colour Black Noise dampening Yes Width (exact) 220 Height (exact) 512 Depth (exact) 480 Width 200
- 300 mm Height 500
- 600 mm Depth 400
- 500 mm Material Plastic Steel Weight (exact) 1016 Weight 10
- 12kg USB (Universal Serial Bus) 4x USB (Universal Serial Bus) 30 2x Audio output 1x Audio input 1x Internal 25" bays 8x Internal 35" bays 11x PCI slots 7x Motherboard tray no Remote no Cable management yes Front LCDTFT display no Filter no Power supply no Power supply format ATX Power supply position Rear Lower Fans pre-installed 1x 140mm 3x 120mm 120mm Fan 7 140mm Fan 5 Fan controller no Card reader no Front door no Hot-swap no Position IO Cover HDD anti-vibration yes Radiator-mounting 1x Single (120mm) 1x Single (140mm) 2x Dual (280mm) 2x Triple (360mm) Lighting no



























...

The NZXT H510 Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has decided to refresh the front panel with new cutting-edge connectors such as USB (Universal Serial Bus) Type C THE FEATURES OF THE NZXT H510 MIDI-TOWER AT A GLANCEMinimalist case from NZXT in black Two Aer F120 fans pre-installed Large tempered glass side window Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives NZXT H510 MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510 complete with smooth & sleek surfaces all in perfect proportion to one another & the changes on the exterior are primarily of a practical nature As such the IO panel was updated & now offers a USB (Universal Serial Bus) 31 connector (Type C) OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510 has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510 offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots There are seven slots available for expansion cards & the graphics card is limited to 381 mm in length As was the case with its predecessors the NZXT H510 does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour Black Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Maximum CPU cooler height 165 mm Maximum GPU length 381 mm Max radiator size Front 60 mm Rear 60 mm
Includes:1x NZXT H5101x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years
...

The NZXT H510 Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has decided to refresh the front panel with new cutting-edge connectors such as USB (Universal Serial Bus) Type C THE FEATURES OF THE NZXT H510 MIDI-TOWER AT A GLANCEMinimalist case from NZXT in white Two Aer F120 fans pre-installed Large tempered glass side window Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives NZXT H510 MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510 complete with smooth & sleek surfaces all in perfect proportion to one another & the changes on the exterior are primarily of a practical nature As such the IO panel was updated & now offers a USB (Universal Serial Bus) 31 connector (Type C) OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510 has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510 offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots There are seven slots available for expansion cards & the graphics card is limited to 381 mm in length As was the case with its predecessors the NZXT H510 does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour White (outer panels cable cover) black (chassis) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Maximum CPU cooler height 165 mm Maximum GPU length 381 mm Max radiator size Front 60 mm Rear 60 mm
Includes:1x NZXT H5101x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years
...

The NZXT H510i is the successor to the H500i This Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has installed a Smart Device V2 to allow for control over fans & RGB-LED accessories while giving the front panel a refresh with new ports THE FEATURES OF THE NZXT H510I MIDI-TOWER AT A GLANCEMinimalist case from NZXT in black Integrated fan- & RGB-LED controller Two AER F120 fans pre-installed Large tempered glass side window
Includes: two addressable NZXT HUE 2 RGB-LED strips Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives Vertical GPU mounting compatible NZXT H510I MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510i complete with smooth & sleek surfaces all in perfect proportion to one another The changes on the exterior are primarily of a practical nature As a special feature the NZXT H510i Midi-Tower gives users an integrated controller with NZXT CAM support named Smart Device V2 It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips which users can then admire through the tempered glass side window The three PWM connectors can be split with Y-cables to connect up to nine fans in total The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans An acoustic sensor helps to maintain the optimal balance between cooling & noise Control is of course possible via the feature-rich software on PC OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510i has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510i offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots in addition the H510i

Includes:: two additional slots to enable the vertical mounting of graphics cards The graphics card is limited to up to 381 mm in length As was the case with its predecessors the NZXT H510i does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour black (outer panels) black (chassis) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Smart Device V2 Ports 3x 4-Pin PWM (max 10 W per channel)2x 4-Pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-Pin internal)1x SATA-Strom Max CPU cooler height 165 mm Max GPU length 381 mm Max radiator-Tiefe Front 60 mm Rear 60 mm
Includes:1x NZXT H510i 1x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years



...

The NZXT H510i is the successor to the H500i This Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has installed a Smart Device V2 to allow for control over fans & RGB-LED accessories while giving the front panel a refresh with new ports THE FEATURES OF THE NZXT H510I MIDI-TOWER AT A GLANCEMinimalist case from NZXT in blackred Integrated fan- & RGB-LED controller Two AER F120 fans pre-installed Large tempered glass side window
Includes: two addressable NZXT HUE 2 RGB-LED strips Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives Vertical GPU mounting compatible NZXT H510I MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510i complete with smooth & sleek surfaces all in perfect proportion to one another The changes on the exterior are primarily of a practical nature As a special feature the NZXT H510i Midi-Tower gives users an integrated controller with NZXT CAM support named Smart Device V2 It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips which users can then admire through the tempered glass side window The three PWM connectors can be split with Y-cables to connect up to nine fans in total The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans An acoustic sensor helps to maintain the optimal balance between cooling & noise Control is of course possible via the feature-rich software on PC OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510i has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510i offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots in addition the H510i

Includes:: two additional slots to enable the vertical mounting of graphics cards The graphics card is limited to up to 381 mm in length As was the case with its predecessors the NZXT H510i does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour black (outer panels chassis) red (cable cover) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Smart Device V2 Ports 3x 4-Pin PWM (max 10 W per channel)2x 4-Pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-Pin internal)1x SATA-Strom Max CPU cooler height 165 mm Max GPU length 381 mm Max radiator-Tiefe Front 60 mm Rear 60 mm
Includes:1x NZXT H510i 1x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years



...

The NZXT H510i is the successor to the H500i This Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has installed a Smart Device V2 to allow for control over fans & RGB-LED accessories while giving the front panel a refresh with new ports THE FEATURES OF THE NZXT H510I MIDI-TOWER AT A GLANCEMinimalist case from NZXT in white Integrated fan- & RGB-LED controller Two AER F120 fans pre-installed Large tempered glass side window
Includes: two addressable NZXT HUE 2 RGB-LED strips Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives Vertical GPU mounting compatible NZXT H510I MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510i complete with smooth & sleek surfaces all in perfect proportion to one another The changes on the exterior are primarily of a practical nature As a special feature the NZXT H510i Midi-Tower gives users an integrated controller with NZXT CAM support named Smart Device V2 It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips which users can then admire through the tempered glass side window The three PWM connectors can be split with Y-cables to connect up to nine fans in total The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans An acoustic sensor helps to maintain the optimal balance between cooling & noise Control is of course possible via the feature-rich software on PC OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510i has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510i offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots in addition the H510i

Includes:: two additional slots to enable the vertical mounting of graphics cards The graphics card is limited to up to 381 mm in length As was the case with its predecessors the NZXT H510i does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour White (outer panels) black (chassis) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Smart Device V2 Ports 3x 4-Pin PWM (max 10 W per channel)2x 4-Pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-Pin internal)1x SATA-Strom Max CPU cooler height 165 mm Max GPU length 381 mm Max radiator-Tiefe Front 60 mm Rear 60 mm
Includes:1x NZXT H510i 1x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years



...

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit It delivers a 40 increase in cooling capacity over stock cooling & features a newly designed bracket with an easier installation process versus the Kraken G10 Plus the G12 is compatible with more than 30 liquid coolers on the market
- Supports the latest Kraken X42X52X6272- Convert GPU’s stock cooling to liquid cooling with 40 increase in cooling capacity- Supports both AMD & NVIDIA graphics cards–reference & non-reference design- Compatible with over 30 liquid coolers & 40 different GPUs- 92mm fan for active VRM cooling with space for aftermarket VRM heatsinks

Specification-

Dimensions 201 x 113 x 32 mm- Material (s) Steel & Plastic-Weight 282 g- Fan

Dimensions 92 x 92 x 25 mm- Fan Speed 1500 RPM- Fan Connector 3-pin- Fan Bearing Rifle Bearing- Fan Rated Voltage 12V DC 018A 216W- Warranty 2 years Compatibility
- Graphic Cards Nvidia Titan X Titan Geforce GTX 1080 1070 1060 980 Ti 980 970 960 780 Ti 780 770 760 680 670 660 Ti 660 580 570AMDRX 480 470 R9 390X 390 380X 380 290X 290 285 280X 280 270X 270 R7 370 HD7970 7950 7870 7850 6970 6950 6870 6850 6790 6770 5870 5850 5830 Compatibility
- AIO Liquid Coolers NZXTKraken X72 X62 X52 X42 X61 X41 X31 X60 X40 (Not compatible with M22) Corsair H105 H110 H90 H75 H55 H50 (CW-906006-WW only) Thermaltake Water 30 Riing RGB 360 280 240 Red 280 140 Water 30 Ultimate Extreme S Extreme Pro Performer Water 20 Extreme Pro Performer Antec KUHLER H2O 920V4 620V4 920 620 Zalman LQ-320 LQ-315 LQ-310








...