United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
NZXT H210 Mini-ITX Gaming Case - Black/Red Tempered Glass
The NZXT H210 is the successor of the H200 Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized and now requires only one screw at the rear of the case This gives a cleaner look and the glass is less under tension THE FEATURES OF THE NZXT H210 MINI-ITX ENCLOSURE AT A GLANCEMini-ITX package from NZXT in blackredTwo Aer F120 fans pre-installedLarge side window made of tempered glassPlace for one 240 and one 120 radiatorSlots for up to three 25-inch drives and one 35-inch driveNZXT H210 MINI-ITX CASE WITH TEMPERED GLASSNZXT once again relies on a proven design with smooth outer surfaces and a minimalist aesthetic for the H210 Changes in appearance are primarily of a practical nature the tempered glass
side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip and easier access to the inside of the computer OPTIONS FOR AIR AND WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact dimensions At the front there is room for two 140 or 120 fans and in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover and on the back The fans ensure adequate aiflow Removable
dust filters are mounted on the front and under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present and 42 millimetres in the rear wall On the cable cover between motherboard and the front of the case a reservoir and pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large
number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically and another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical detailsDimensions without feet 210 x 334 x 372 mm (W x H x D)Dimensions with feet 210 x 349 x 372 mm (W x H x D)Material steel tempered glassWeight 59 kgColor Black (outer panels
chassis) red (cable cover accents)Form factor Mini-ITXFans possible in total2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 dB(A) front)(1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 dB(A) lid)Filter front bottomRadiator mountings1x 240 mm (front side)1x 120 mm (rear)Drive bays1x 35 25 inch (internal)3x 25 inch (internal)Power supply 1x standard ATX SFX (optional)Expansion slots 2IO Panel1x USB 30 Type A (USB 31 Gen 1 internal connection)1x USB 31 Type C (USB 31 Gen 2 internal connection)1x 35 mm jack (4-pin TRRS Audio InOut)Maximum CPU cooler height 165 mmMaximum length of the graphics card 325 mmMaximum power supply length 311 mmMaximum radiator depthFront 85 mmBack side 42 mmScope of
delivery1x NZXT H2101x set mounting screws10x cable ties1x headset adapter (1x 35 mm 4-pole to 2x 35 mm 3-pole)Manufacturer warranty 2 years
side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip and easier access to the inside of the computer OPTIONS FOR AIR AND WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact dimensions At the front there is room for two 140 or 120 fans and in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover and on the back The fans ensure adequate aiflow Removable
dust filters are mounted on the front and under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present and 42 millimetres in the rear wall On the cable cover between motherboard and the front of the case a reservoir and pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large
number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically and another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical detailsDimensions without feet 210 x 334 x 372 mm (W x H x D)Dimensions with feet 210 x 349 x 372 mm (W x H x D)Material steel tempered glassWeight 59 kgColor Black (outer panels
chassis) red (cable cover accents)Form factor Mini-ITXFans possible in total2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 dB(A) front)(1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 dB(A) lid)Filter front bottomRadiator mountings1x 240 mm (front side)1x 120 mm (rear)Drive bays1x 35 25 inch (internal)3x 25 inch (internal)Power supply 1x standard ATX SFX (optional)Expansion slots 2IO Panel1x USB 30 Type A (USB 31 Gen 1 internal connection)1x USB 31 Type C (USB 31 Gen 2 internal connection)1x 35 mm jack (4-pin TRRS Audio InOut)Maximum CPU cooler height 165 mmMaximum length of the graphics card 325 mmMaximum power supply length 311 mmMaximum radiator depthFront 85 mmBack side 42 mmScope of
delivery1x NZXT H2101x set mounting screws10x cable ties1x headset adapter (1x 35 mm 4-pole to 2x 35 mm 3-pole)Manufacturer warranty 2 years
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark