The new NZXT AER RGB2 fans Integrate seamlessly into the HUE 2 ecosystem Aer RGB 2 fans deliver optimal airflow & advanced lighting customizations You can connect up to five fans per channel or mix-&-match with any HUE 2 accessory in any channel & synchronize them using CAM for amazing lighting effects that work in perfect harmony With fluid dynamic bearings & winglet tips Aer RGB 2 fans offer enhanced cooling while minimizing noise Features- CAM-powered for seamless software control & nearly infinite customization- Uniquely shaped custom engineered light guide creates stunning visual effects with uniform light dispersion- Compatible with all HUE 2 controllers & accessories
- Daisy chain & group fans together for additional lighting effects- PWM fan with optimized cooling & whisper-low 22 d BA- Fluid dynamic bearing engineered to last over six years HUE 2 supports up to a maximum of 40 LEDs per channel five Aer RGB 2 or six HUE 2 accessories total Elegant Lighting Mix & Match the AER RGB 2 with any HUE 2 Accessory With Addressable LEDS Aer RGB 2 fans provide dramatic lighting effects to complement your system & they sync perfectly with the rest fo yoru HUE 2 accessories Optimal Cooling Each AER RGB features a winglet tip fan blade design producing optimal airflow while keeping the fans as quiet as possible Fluid dynamic bearings in every fan provide long lasting near silent operation Digital control through CAMUsing our intuitive CAM Software you'll choose from preset & custom modes to synchronise the Aer RGB 2 fans with other HUE 2 accessories to create the perfect lighting for your PC Fan

Specification-

Dimensions 140mm 140 x 140 x 26mm- Material (s) Plastic rubber PCB- Output LED Quantity 8 LEDs each- Fan Rated Voltage 12V DC- Fan Airflow 3039 &8211; 9119 CFM- Fan Air Pressure 017 &8211; 152mm-H2O- Fan Speed 500-1500 RPM- Fan Noise Level 22 &8211; 33 d BA- Fan Life 6 years- Fan Bearing Fluid Dynamic Bearing (FDB)- Fan Connector 4-pin PWM- Warranty 2 years- 1 x AER RGB 2 Fan- 1 x Fan Connection Cable
- 500mm- 1 x Fan to Fan Cable
- 500mm- 1 x Fan to Accessory
- 500mm System Requirements PC with HUE 2 RGB lighting controller & Windows&174; 10 operating system Internet connection is needed to download CAM Some CAM features require Internet access a valid email address & acceptance of our current Terms of Service







...

Designed to integrate seamlessly with HUE the Aer RGB fan provides optimal airflow & advanced lighting customizations Group & daisy chain up to five fans per channel from the HUE for extensive lighting modes that work in perfect harmony Select & modify over 10 lighting effects with ease using CAM’s software interface The Aer RGB fans feature fluid dynamic bearings & winglet tips that deliver enhanced performance & minimize noise levels
- HUE & CAM-compatible for seamless software controls & customizations
- Daisy chain & group fans together for additional lighting effects
- PWM fan with optimized cooling & whisper-low 22 d BA
- Fluid dynamic bearing engineered to last over six years
- Uniform light dispersion with unique light guide design Performance Rotational speed (min) 500 RPM Rotational speed (max) 1500 RPM Noise level (low speed) 22 d B Noise level (high speed) 31 d B Type Fan Suitable for Computer case Fan diameter 12 cm Supported processor sockets Not supported Compatible processor series Not supported Minimum airflow 20 cfm Maximum airflow 614 cfm Minimum air pressure 015 mm H2O Maximum air pressure 136 mm H2O Number of fans 3 Design Colour of product Black Weight &

Dimensions Width 120 mm Depth 120 mm Height 26 mm Weight 183 g






...

Designed to integrate seamlessly with HUE the Aer RGB fan provides optimal airflow & advanced lighting customizations Group & daisy chain up to five fans per channel from the HUE for extensive lighting modes that work in perfect harmony Select & modify over 10 lighting effects with ease using CAM’s software interface The Aer RGB fans feature fluid dynamic bearings & winglet tips that deliver enhanced performance & minimize noise levels
- HUE & CAM-compatible for seamless software controls & customizations
- Daisy chain & group fans together for additional lighting effects
- PWM fan with optimized cooling & whisper-low 22 d BA
- Fluid dynamic bearing engineered to last over six years
- Uniform light dispersion with unique light guide design
-

Includes:: 2 Aer RGB fans & HUE controller Performance Rotational speed (min) 500 RPM Rotational speed (max) 1500 RPM Noise level (low speed) 22 d B Noise level (high speed) 33 d B Type Fan Suitable for Computer case Fan diameter 14 cm Supported processor sockets Not supported Compatible processor series Not supported Minimum airflow 239 cfm Maximum airflow 716 cfm Minimum air pressure 02 mm H2O Maximum air pressure 181 mm H2O Number of fans 1 Power Voltage 12 Colour Colour of product Black Weight &

Dimensions Width 140 mm Depth 140 mm Height 26 mm Weight 213 g









...

Designed to integrate seamlessly with HUE the Aer RGB fan provides optimal airflow & advanced lighting customizations Group & daisy chain up to five fans per channel from the HUE for extensive lighting modes that work in perfect harmony Select & modify over 10 lighting effects with ease using CAM’s software interface The Aer RGB fans feature fluid dynamic bearings & winglet tips that deliver enhanced performance & minimize noise levels
- HUE & CAM-compatible for seamless software controls & customizations
- Daisy chain & group fans together for additional lighting effects
- PWM fan with optimized cooling & whisper-low 22 d BA
- Fluid dynamic bearing engineered to last over six years
- Uniform light dispersion with unique light guide design Performance Rotational speed (min) 500 RPM Rotational speed (max) 1500 RPM Noise level (low speed) 22 d B Noise level (high speed) 33 d B Type Fan Suitable for Computer case Fan diameter 14 cm Supported processor sockets Not supported Compatible processor series Not supported Minimum airflow 239 cfm Maximum airflow 716 cfm Minimum air pressure 02 mm H2O Maximum air pressure 181 mm H2O Number of fans 1 Design Colour of product Black Power Voltage 12 Weight &

Dimensions Width 140 mm Depth 140 mm Height 26 mm Weight 213 g






...

Designed to integrate seamlessly with HUE the Aer RGB fan provides optimal airflow & advanced lighting customizations Group & daisy chain up to five fans per channel from the HUE for extensive lighting modes that work in perfect harmony Select & modify over 10 lighting effects with ease using CAM’s software interface The Aer RGB fans feature fluid dynamic bearings & winglet tips that deliver enhanced performance & minimize noise levels
- HUE & CAM-compatible for seamless software controls & customizations
- Daisy chain & group fans together for additional lighting effects
- PWM fan with optimized cooling & whisper-low 22 d BA
- Fluid dynamic bearing engineered to last over six years
- Uniform light dispersion with unique light guide design Performance Rotational speed (min) 500 RPM Rotational speed (max) 1500 RPM Noise level (low speed) 22 d B Noise level (high speed) 33 d B Type Fan Suitable for Computer case Fan diameter 14 cm Supported processor sockets Not supported Compatible processor series Not supported Minimum airflow 239 cfm Maximum airflow 716 cfm Minimum air pressure 02 mm H2O Maximum air pressure 181 mm H2O Number of fans 3 Power Voltage 12 Colour Colour of product Black Weight &

Dimensions Width 140 mm Depth 140 mm Height 26 mm Weight 213 g






...

The NZXT Sleeved LED Kit re-images the way enthusiasts sets up lighting inside the computer case Traditionally cold cathodes & even solid LED boards take up large amounts of space inside the case Using sleeved wires paired with high density amount of LEDs the NZXT LED kit allows users to hide lights between side panels & under components creating an amazing glow effect Lastly the NZXT Sleeved LED Kit is paired with a three step light sensitivity & onoff light function via PCI keeping the LED kit stealthily hidden away while unused
- Easy Management Designed to take up minimal space & fit in narrow areas in any case the Sleeved LED Kit provides numerous LEDs on one cable to simplify installation
- 5 Kit Colors Set the mood or mix & match with red green white blue or orange kits
- Sleeved LED Kit comes in 2 lengths; 1m & 2m
- 3-Step Light Sensitivity Allows user to turn LEDs on high medium & low settings or turn off



...

The NZXT H210 is the successor of the H200 Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is less under tension THE FEATURES OF THE NZXT H210 MINI-ITX ENCLOSURE AT A GLANCEMini-ITX package from NZXT in black Two Aer F120 fans pre-installed Large side window made from tempered glass Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210 MINI-ITX CASE WITH TEMPERED GLASSNZXT once again relies on a proven design with smooth outer surfaces & a minimalist aesthetic for the H210 Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip & easier access to the inside of the computer OPTIONS FOR AIR & WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover & on the back The fans ensure adequate aiflow Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present & 42 millimetres in the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 59kg Color Black Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) front) (1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) lid) Filter front bottom Radiator mountings 1x 240 mm (front side)1x 120 mm (rear) Drive bays 1x 35 25 inch (internal)3x 25 inch (internal) Power supply 1x standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Back side 42 mm Scope of delivery 1x NZXT H2101x set mounting screws 10x cable ties 1x headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pole) Manufacturer warranty 2 years

...

The NZXT H210 is the successor of the H200 Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is less under tension THE FEATURES OF THE NZXT H210 MINI-ITX ENCLOSURE AT A GLANCEMini-ITX package from NZXT in blackred Two Aer F120 fans pre-installed Large side window made from tempered glass Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210 MINI-ITX CASE WITH TEMPERED GLASSNZXT once again relies on a proven design with smooth outer surfaces & a minimalist aesthetic for the H210 Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip & easier access to the inside of the computer OPTIONS FOR AIR & WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover & on the back The fans ensure adequate aiflow Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present & 42 millimetres in the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 59kg Color Black (outer panels chassis) red (cable cover accents) Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) front) (1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) lid) Filter front bottom Radiator mountings 1x 240 mm (front side)1x 120 mm (rear) Drive bays 1x 35 25 inch (internal)3x 25 inch (internal) Power supply 1x standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Back side 42 mm Scope of delivery 1x NZXT H2101x set mounting screws 10x cable ties 1x headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pole) Manufacturer warranty 2 years

...

The NZXT H210 is the successor of the H200 Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is less under tension THE FEATURES OF THE NZXT H210 MINI-ITX ENCLOSURE AT A GLANCEMini-ITX package from NZXT in white Large side window made from tempered glass Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210 MINI-ITX CASE WITH TEMPERED GLASSNZXT once again relies on a proven design with smooth outer surfaces & a minimalist aesthetic for the H210 Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four thumbscrews On the NZXT H210 on the other hand the side surface is completely flat A single thumbscrew on the back of the case ensures a secure grip & easier access to the inside of the computer OPTIONS FOR AIR & WATER COOLINGIf you rely on traditional air cooling the NZXT H210 offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan respectively For processor coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower from the factory with in-house fans from the Aer series A black 120 mm model is pre-installed in the cover & on the back The fans ensure adequate aiflow Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 radiator In addition a 120 radiator can be installed on the rear wall In the front 85 millimetres of space is present & 42 millimetres in the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWAREThe interior of the NZXT H210 is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters in length Like its predecessors the NZXT H210 has no external drive bays Internally however quite a large number of storage can be installed Under the power supply cover a 35 hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive Behind the motherboard tray lies sufficient space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch drive Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available to enable cables to be cleverly concealed in the back Technical details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 59kg Color White (outer panels cable cover) black (chassis accents) Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover)of which pre-installed 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) front) (1200 rpm) 1x 120 mm Aer F120 (1200 rpm 8566 m&179;h 28 d B (A) lid) Filter front bottom Radiator mountings 1x 240 mm (front side)1x 120 mm (rear) Drive bays 1x 35 25 inch (internal)3x 25 inch (internal) Power supply 1x standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Back side 42 mm Scope of delivery 1x NZXT H2101x set mounting screws 10x cable ties 1x headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pole) Manufacturer warranty 2 years

...

The NZXT H210i is the successor of the H200i Like its predecessors the Mini-Tower offers a proven no-frills design The mounting mechanism of the tempered glass side panel has been optimized & now requires only one screw at the rear of the case This gives a cleaner look & the glass is under less total tension In addition NZXT has installed a Smart Device V2 to control fans & RGB LED accessories & has also refreshed the front panel with new connectivity options THE FEATURES OF THE NZXT H210I-MINI-ITX PACKAGE AT A GLANCEMini-ITX package from NZXT in blackred Integrated controller for fan & RGB-LEDs Two Aer F120 fans pre-installed Large side window made from tempered glass
Includes: addressable NZXT HUE 2 RGB-LED strip Place for one 240 & one 120 radiator Slots for up to three 25-inch drives & one 35-inch drive NZXT H210I MINI-ITX CASE WITH TEMPERED GLASSNZXT has opted for the tried & tested shape of the H210i's predecesssor with smooth outer surfaces & attractive proportions Changes in appearance are primarily of a practical nature the tempered glass side panel of the predecessor was attached to the chassis with four knurled screws On the NZXT H210i on the other hand the side surface is completely flat A single thumbscrew on the back of the case provides a secure grip & easier access to the inside of the computer As a special feature the NZXT H210i mini tower has an integrated controller with NZXT CAM support called the Smart Device V2 It is used to control the pre-installed NXZT Aer F fans & the NXZT HUE 2 RGB-LED strips included with the case which are visible through the tempered glass window A total of nine fans can be connected to the three PWM connectors via Y-cables The RGB connectors together support four HUE 2 strips or up to five NZXT Aer RGB fans An acoustic sensor helps to determine the optimum balance between cooling & noise The system is controlled via the feature-rich software on the PC AIR & WATER COOLING OPTIONSIf you rely on traditional air cooling the NZXT H210i offers a lot despite its compact

Dimensions At the front there is room for two 140 or 120 fans & in the roof as well as in the back wall there is room for one 120 mm fan each For CPU coolers a maximum height of 165 millimeters is provided NZXT equips the Mini Tower as standard with in-house fans from the Aer series A black 120 model is pre-installed in the cover & on the back The fans ensure a plentiful supply of fresh air Removable dust filters are mounted on the front & under the power supply unit The installation of a custom water cooling system was also taken into account In front the user can install a 240 mm radiator In addition a 120 heat exchanger can be installed on the rear wall In the front 85 millimetres of space are provided along with 42 millimetres on the rear wall On the cable cover between motherboard & the front of the case a reservoir & pump with up to 150 mm total height can be installed PLENTY OF SPACE FOR HARDWARE COMPONENTSThe interior of the NZXT H210i is limited but well structured Only Mini-ITX format motherboards can be used Two slots are available for expansion cards Graphics cards may be up to 325 millimeters long Like its predecessors the NZXT H210i has no external drive bays Internally however a quite large number of storage drives can be installed Under the power supply cover a 35 inch hard disk can be installed in the bottom of the case The holes are also suitable for a 25-inch drive should you prefer Behind the motherboard tray there is space for two 25-inch drives mounted vertically & another 25-inch drive on the side of the motherboard tray This makes it possible to mount up to four 25-inch drives or three 25-inch SSDs as well as a 35-inch hard disk Behind the motherboard tray there are dedicated rails for cable routing There is about 163 millimeters of space available for discretely stowing away unsightly cables Technical Details Dimensions without feet 210 x 334 x 372 mm (W x H x D) Dimensions with feet 210 x 349 x 372 mm (W x H x D) Material steel tempered glass Weight 6kg Colour Black (outer panels chassis) Red (cable cover trim) Form factor Mini-ITXFans possible in total 2x 120 mm or 2x 140 mm (front side)1x 120 mm (back side)1x 120 mm (cover) Pre-installed 1x 120 mm Aer F120 (1200 RPM 8566 m&179;h 28 d B (A) Rear)1x 120 mm Aer F120 (1200 RPM 8566 m&179;h 28 d B (A) Roof) Filter Front bottom Radiator Mountings 1x 240 mm (front)1x 120 mm (rear) Drive Bays 1x 35 25 (internal)3x 25 (internal)PSU 1x Standard ATX SFX (optional) Expansion slots 2IO Panel 1x USB (Universal Serial Bus) 30 Type A (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio In Out) Smart Device V2 Connections 3x 4-pin PWM (max 10W per channel)2x 4-pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-pin internal)1x SATA current Maximum CPU cooler height 165 mm Maximum length of the graphics card 325 mm Maximum power supply length 311 mm Maximum radiator depth Front 85 mm Rear 42 mm Accessories 1x NZXT H210i 1x Set mounting screws 10x Cable ties 1x Headset adapter (1x 3.5cm 4-pole to 2x 3.5cm 3-pin) Manufacturer warranty 2 years


...