The NZXT H510 Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has decided to refresh the front panel with new cutting-edge connectors such as USB (Universal Serial Bus) Type C THE FEATURES OF THE NZXT H510 MIDI-TOWER AT A GLANCEMinimalist case from NZXT in blackred Two Aer F120 fans pre-installed Large tempered glass side window Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives NZXT H510 MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510 complete with smooth & sleek surfaces all in perfect proportion to one another & the changes on the exterior are primarily of a practical nature As such the IO panel was updated & now offers a USB (Universal Serial Bus) 31 connector (Type C) OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510 has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510 offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots There are seven slots available for expansion cards & the graphics card is limited to 381 mm in length As was the case with its predecessors the NZXT H510 does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour Black (outer panels chassis) Red (cable cover) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Maximum CPU cooler height 165 mm Maximum GPU length 381 mm Max radiator size Front 60 mm Rear 60 mm
Includes:1x NZXT H5101x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years
...

The NZXT H510 Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has decided to refresh the front panel with new cutting-edge connectors such as USB (Universal Serial Bus) Type C THE FEATURES OF THE NZXT H510 MIDI-TOWER AT A GLANCEMinimalist case from NZXT in white Two Aer F120 fans pre-installed Large tempered glass side window Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives NZXT H510 MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510 complete with smooth & sleek surfaces all in perfect proportion to one another & the changes on the exterior are primarily of a practical nature As such the IO panel was updated & now offers a USB (Universal Serial Bus) 31 connector (Type C) OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510 has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510 offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots There are seven slots available for expansion cards & the graphics card is limited to 381 mm in length As was the case with its predecessors the NZXT H510 does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour White (outer panels cable cover) black (chassis) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Maximum CPU cooler height 165 mm Maximum GPU length 381 mm Max radiator size Front 60 mm Rear 60 mm
Includes:1x NZXT H5101x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years
...

The NZXT H510i is the successor to the H500i This Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has installed a Smart Device V2 to allow for control over fans & RGB-LED accessories while giving the front panel a refresh with new ports THE FEATURES OF THE NZXT H510I MIDI-TOWER AT A GLANCEMinimalist case from NZXT in black Integrated fan- & RGB-LED controller Two AER F120 fans pre-installed Large tempered glass side window
Includes: two addressable NZXT HUE 2 RGB-LED strips Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives Vertical GPU mounting compatible NZXT H510I MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510i complete with smooth & sleek surfaces all in perfect proportion to one another The changes on the exterior are primarily of a practical nature As a special feature the NZXT H510i Midi-Tower gives users an integrated controller with NZXT CAM support named Smart Device V2 It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips which users can then admire through the tempered glass side window The three PWM connectors can be split with Y-cables to connect up to nine fans in total The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans An acoustic sensor helps to maintain the optimal balance between cooling & noise Control is of course possible via the feature-rich software on PC OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510i has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510i offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots in addition the H510i

Includes:: two additional slots to enable the vertical mounting of graphics cards The graphics card is limited to up to 381 mm in length As was the case with its predecessors the NZXT H510i does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour black (outer panels) black (chassis) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Smart Device V2 Ports 3x 4-Pin PWM (max 10 W per channel)2x 4-Pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-Pin internal)1x SATA-Strom Max CPU cooler height 165 mm Max GPU length 381 mm Max radiator-Tiefe Front 60 mm Rear 60 mm
Includes:1x NZXT H510i 1x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years



...

The NZXT H510i is the successor to the H500i This Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has installed a Smart Device V2 to allow for control over fans & RGB-LED accessories while giving the front panel a refresh with new ports THE FEATURES OF THE NZXT H510I MIDI-TOWER AT A GLANCEMinimalist case from NZXT in blackred Integrated fan- & RGB-LED controller Two AER F120 fans pre-installed Large tempered glass side window
Includes: two addressable NZXT HUE 2 RGB-LED strips Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives Vertical GPU mounting compatible NZXT H510I MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510i complete with smooth & sleek surfaces all in perfect proportion to one another The changes on the exterior are primarily of a practical nature As a special feature the NZXT H510i Midi-Tower gives users an integrated controller with NZXT CAM support named Smart Device V2 It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips which users can then admire through the tempered glass side window The three PWM connectors can be split with Y-cables to connect up to nine fans in total The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans An acoustic sensor helps to maintain the optimal balance between cooling & noise Control is of course possible via the feature-rich software on PC OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510i has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510i offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots in addition the H510i

Includes:: two additional slots to enable the vertical mounting of graphics cards The graphics card is limited to up to 381 mm in length As was the case with its predecessors the NZXT H510i does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour black (outer panels chassis) red (cable cover) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Smart Device V2 Ports 3x 4-Pin PWM (max 10 W per channel)2x 4-Pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-Pin internal)1x SATA-Strom Max CPU cooler height 165 mm Max GPU length 381 mm Max radiator-Tiefe Front 60 mm Rear 60 mm
Includes:1x NZXT H510i 1x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years



...

The NZXT H510i is the successor to the H500i This Midi-Tower offers like its predecessors an attractive & minimalist design NZXT has installed a Smart Device V2 to allow for control over fans & RGB-LED accessories while giving the front panel a refresh with new ports THE FEATURES OF THE NZXT H510I MIDI-TOWER AT A GLANCEMinimalist case from NZXT in white Integrated fan- & RGB-LED controller Two AER F120 fans pre-installed Large tempered glass side window
Includes: two addressable NZXT HUE 2 RGB-LED strips Space for a 280 mm radiator in the front Bays for up to three 25- & three 35 drives Vertical GPU mounting compatible NZXT H510I MIDI-TOWER PERFECT FOR MODDING!NZXT has opted for the tried-&-tested shape of its predecessors in the H510i complete with smooth & sleek surfaces all in perfect proportion to one another The changes on the exterior are primarily of a practical nature As a special feature the NZXT H510i Midi-Tower gives users an integrated controller with NZXT CAM support named Smart Device V2 It is used for controlling the pre-installed NZXT Aer F fans as well as the two included NZXT HUE 2 RGB-LED strips which users can then admire through the tempered glass side window The three PWM connectors can be split with Y-cables to connect up to nine fans in total The RGB connectors support together a total of four HUE 2 strips or up to five NZXT AER RGB fans An acoustic sensor helps to maintain the optimal balance between cooling & noise Control is of course possible via the feature-rich software on PC OPTIONS FOR AIR- & WATER COOLINGThose who prefer to opt for traditional air cooling will find that the NZXT H510i has plenty to offer with two in the front & either a 120- or 140 mm fan in the roof & with space for a 120mm in the back there's plenty of options For CPU coolers there is a maximum of 165 mm height available NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series One black 120 mm model in the back as well as in the roof The fans afford users more than sufficient airflow The side edges the bottom of the front cover & the area beneath the power supply all include removable dust filters NZXT even took into consideration a wide range of custom water cooling options in the front users can install a 280- or 240mm radiator The rear of the case supports a 120 mm radiator The thickness of both radiators is limited to a maximum of 60 mm The cable cover between the motherboard & the front of the case allows reservoirs & pumps with a height of up to 180 mm to be installed ABUNDANT SPACE FOR HARDWAREThe interior of the NZXT H510i offers space for the installation of a range of high-end hardware Mini-ITX Micro-ATX & ATX motherboards can all be installed in the Midi-Tower For expansion cards the case offers seven slots in addition the H510i

Includes:: two additional slots to enable the vertical mounting of graphics cards The graphics card is limited to up to 381 mm in length As was the case with its predecessors the NZXT H510i does not offer external drive support Internally however users are free to install a large number of drives if needed beneath the PSU shroud lies a hard drive cage This enables users to install up to three 35 hard drives Behind the motherboard tray two 25 drives can be mounted vertically Another 25 drive can be installed on the PSU shroud This means that up to three 35 drives- & three 25 drives are possible Behind the motherboard tray users will find dedicated rails for cable guidance There are between 19 & 23 mm of space available to help stow away unsightly cables Technical Details Dimensions without feet 210 x 435 x 428 mm (W x H x D) Dimensions with feet 210 x 460 x 428 mm (W x H x D) Material Steel tempered glass Weight 68kg Colour White (outer panels) black (chassis) Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm or 2x 140 mm (front)1x 120 mm (rear)1x 120 or 1x 140 mm (roof) Pre-installed 1x 120 mm AER F120 (1200 RPM 8566 m&179;h 28 d B (A) rear)1x 120 mm AER F120 (1200 Umin 8566 m&179;h 28 d B (A) roof) Filter Front bottom Radiator Mountings 1x 280 or 1x 240 mm (front)1x 120 mm (rear) Drive Bays 3x 35 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7 2 (vertical)IO Panel 1x USB (Universal Serial Bus) 30 (USB 31 Gen 1 internal connection)1x USB (Universal Serial Bus) 31 Type C (USB 31 Gen 2 internal connection)1x 3.5cm jack (4-pin TRRS Audio-In Out) Smart Device V2 Ports 3x 4-Pin PWM (max 10 W per channel)2x 4-Pin RGB (NZXT HUE 2 proprietary)1x USB (Universal Serial Bus) 20 (9-Pin internal)1x SATA-Strom Max CPU cooler height 165 mm Max GPU length 381 mm Max radiator-Tiefe Front 60 mm Rear 60 mm
Includes:1x NZXT H510i 1x Set mounting screws 10x Cable binders 1x Headset adapter (1x 3.5cm 4-pin to 2x 3.5cm 3-pin) Manufacturer's guarantee 2 Years



...

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit It delivers a 40 increase in cooling capacity over stock cooling & features a newly designed bracket with an easier installation process versus the Kraken G10 Plus the G12 is compatible with more than 30 liquid coolers on the market
- Supports the latest Kraken X42X52X6272- Convert GPU&8217;s stock cooling to liquid cooling with 40 increase in cooling capacity- Supports both AMD & NVIDIA graphics cards&8211;reference & non-reference design- Compatible with over 30 liquid coolers & 40 different GPUs- 92mm fan for active VRM cooling with space for aftermarket VRM heatsinks

Specification-

Dimensions 201 x 113 x 32 mm- Material (s) Steel & Plastic-Weight 282 g- Fan

Dimensions 92 x 92 x 25 mm- Fan Speed 1500 RPM- Fan Connector 3-pin- Fan Bearing Rifle Bearing- Fan Rated Voltage 12V DC 018A 216W- Warranty 2 years Compatibility
- Graphic Cards Nvidia Titan X Titan Geforce GTX 1080 1070 1060 980 Ti 980 970 960 780 Ti 780 770 760 680 670 660 Ti 660 580 570AMDRX 480 470 R9 390X 390 380X 380 290X 290 285 280X 280 270X 270 R7 370 HD7970 7950 7870 7850 6970 6950 6870 6850 6790 6770 5870 5850 5830 Compatibility
- AIO Liquid Coolers NZXTKraken X72 X62 X52 X42 X61 X41 X31 X60 X40 (Not compatible with M22) Corsair H105 H110 H90 H75 H55 H50 (CW-906006-WW only) Thermaltake Water 30 Riing RGB 360 280 240 Red 280 140 Water 30 Ultimate Extreme S Extreme Pro Performer Water 20 Extreme Pro Performer Antec KUHLER H2O 920V4 620V4 920 620 Zalman LQ-320 LQ-315 LQ-310








...

The Kraken M22 features two individually addressable RGB channels & our signature infinite-mirror effect for stunning lighting ...

The refreshed Kraken X Series is a must-have for any build providing better cooling stunning visual effects & intuitive installation ...

The Kraken X63 RGB is a stunning must-have for any build with the addition of NZXT RGB fans You can fine-tune settings with ...

The Kraken X73 RGB is a stunning must-have for any build with the addition of NZXT RGB fans You can fine-tune settings with ...