The AMP series of power supplies arose from a cooperation between the hardware specialists at PHANTEKS & Seasonic offering a combination of premium quality components as well as unparalleled efficiency The fully modular as well as high-performance supplies include 80 PLUS Gold certification & also happen to be compatible with the Revolt PRO-series of power supplies from PHANTEKS
- meaning that they can be used as an upgrade or expansion A whisper-quiet 120 mm temperature-regulated fan & hybrid operating mode helps to ensure the power supply produces minimal noise THE FEATURES OF THE PHANTEKS AMP 550W POWER SUPPLY AT A GLANCE550 Watt power supply with powerful 45A single rail High efficiency thanks to 80 PLUS Gold certification Quiet 120 mm fan with semi-passive mode Fully modular cable management with flat cables Four 62-pin PCIe connectors for graphics cards Compatible with Revolt Pro Link POWER SUPPLY WITH 80 PLUS GOLD EFFICIENCY & POWERFUL 45A RAILThe PHANTEKS AMP 550W is a high-performance power supply capable of delivering 550 Watts of output meaning that even high-end gaming PCs will have all the power they require The powerful 12 Volt rail delivers a full 45 Ampere & the 80 PLUS Gold certification means users can rest assured that the power supply wastes no heat or power unnecessarily The electrical components are also of exceptionally high quality with PHANTEKS opting instead for premium 105&176;-rated capacitors from Japan The fully modular cable system allows for a clean & tidy interior devoid of excess cabling & thereby helps ensure optimal airflow The PHANTEKS AMP 550W

Includes:: in addition to a 24-pin cable & two 44-pin cables four 62-pin PCIe connectors eight SATA- & thre 4-pin Molex connectors This wide variety of connectivity options means that even enthusiasts' systems will not have to make compromises Visually the black power supply is quite reserved & attractive & the light grey motif means it blends in perfectly with a case like the Enthoo Evolv X for example which has a cut-out in the PSU shroud that would help show off the supply CUSTOMISABLE FAN CONTROLLER & REVOLT PRO LINKThe installed 120 mm fan offers quiet-running Fluid Dynamic Bearings meaning that not only do they produce minimal noise they are also exceptionally durable over time The hybrid switch on the back of the power supply allows users to select a semi-passive mode if needed This means that once again the power supply does not disappoint when it comes to minimising noise & maximising performance depending on the use case scenario The PHANTEKS AMP 550W is certified for use with the Revolt Pro Link & can be used in conjunction with a Revolt Pro power supply PHANTEKS equips the Revolt Pro-series of power supplies with 24-pin- & 8-pin connectors that allow a second Revolt Pro-series- or AMP-series power supply to be connected This means that users can benefit from even greater total output in the future if needed or opt for the peace of mind that comes with having a second redundant power supply on hand It almost goes without saying at this point that the PHANTEKS AMP 550W power supply

Includes:: all the requisite safety features that we have come to expect from modern high-end power supplies in addition the manufacturer also stands confidently behind their product with a guarantee that lasts a full ten years Technical Details Dimensions 150 x 86 x 140 mm (W x H x D) Fan 120 mm (Fluid Dynamic Bearing automatic control with semi-passive mode) Efficiency 879087 2050100 Load 80 PLUS Gold certification Active PFCForm factor ATX12 V Output 550 W33V 20 A5V 20 A33V &38; 5V 100 W12V 45 A 540 W-12V 03 A 36 W5VSB 3 A 15 WConnectivity (removable)1x 24-Pin 2x 44-Pin 4x 62-Pin-PCIe 8x SATA3x 4-Pin Molex 1x Adapter 4-pin Molex to 2x SATA
Includes:1x PHANTEKS AMP PSUPower cable Instructions Cable ties Disposable cable ties Connecting cable Screws Manufacturer's guarantee 10 Years





...

The AMP series of power supplies arose from a cooperation between the hardware specialists at PHANTEKS & Seasonic offering a combination of premium quality components as well as unparalleled efficiency The fully modular as well as high-performance supplies include 80 PLUS Gold certification & also happen to be compatible with the Revolt PRO-series of power supplies from PHANTEKS
- meaning that they can be used as an upgrade or expansion A whisper-quiet 120 mm temperature-regulated fan & hybrid operating mode helps to ensure the power supply produces minimal noise THE FEATURES OF THE PHANTEKS AMP 650W POWER SUPPLY AT A GLANCE650 Watt PSU with powerful 54A single rail High efficiency thanks to 80 PLUS Gold certification Quiet 120 mm fan with semi-passive mode Fully modular cable management with flat cables Four 62-pin PCIe connectors for graphics cards Compatible with Revolt Pro Link POWER SUPPLY WITH 80 PLUS GOLD EFFICIENCY & POWERFUL 54A RAILThe PHANTEKS AMP 650W is a high-performance power supply capable of delivering 650 Watts of total output meaning that even high-end gaming PCs will have all the power they require The powerful 12 Volt rail delivers a full 54 Ampere & the 80 PLUS Gold certification means users can rest assured that the power supply wastes no heat or power unnecessarily The electrical components are also of exceptionally high quality with PHANTEKS opting instead for premium 105&176;-rated capacitors from Japan The fully modular cable system allows for a clean & tidy interior devoid of excess cabling & thereby helps ensure optimal airflow The PHANTEKS AMP 650W

Includes:: in addition to a 24-pin cable & two 44-pin cables four 62-pin PCIe connectors as well as eight SATA- & three 4-pin Molex connectors This wide variety of connectivity options means that even enthusiasts' systems will not have to make compromises Visually the black power supply is quite reserved & attractive & the light grey motif means it blends in perfectly with a case like the Enthoo Evolv X for example which has a cut-out in the PSU shroud that would help show off the supply ADJUSTABLE FAN CONTROLLER & REVOLT PRO LINKThe installed 120 mm fan offers quiet-running Fluid Dynamic Bearings meaning that not only do they produce minimal noise they are also exceptionally durable over time The hybrid switch on the back of the power supply allows users to select a semi-passive mode if needed This means that once again the power supply does not disappoint when it comes to minimising noise & maximising performance depending on the use case scenario The PHANTEKS AMP 650W is certified for use with the Revolt Pro Link & can be used in conjunction with a Revolt Pro power supply PHANTEKS equips the Revolt Pro-series of power supplies with 24-pin- & 8-pin connectors that allow a second Revolt Pro-series- or AMP-series power supply to be connected This means that users can benefit from even greater total output in the future if needed or opt for the peace of mind that comes with having a second redundant power supply on hand It almost goes without saying at this point that the PHANTEKS AMP 650W power supply

Includes:: all the requisite safety features that we have come to expect from modern high-end power supplies in addition the manufacturer also stands confidently behind their product with a guarantee that lasts a full ten years Technical Details Dimensions 150 x 86 x 140 mm (W x H x D) Fan 120 mm (Fluid Dynamic Bearing automatic control with semi-passive mode) Efficiency 879087 2050100 Load 80 PLUS Gold certification Active PFCForm factor ATX12 V Output 650 W33V 20 A5V 20 A33V &38; 5V 100 W12V 54 A 648 W-12V 03 A 36 W5VSB 3 A 15 WConnectivity (removable)1x 24-Pin 2x 44-Pin 4x 62-Pin PCIe 8x SATA3x 4-Pin Molex 1x Adapter 4-pin Molex to 2x SATA
Includes:1x PHANTEKS AMP PSUPower cable Instructions Cable ties Disposable cable ties Connecting cable Screws Manufacturer's guarantee 10 Years





...

The AMP series of power supplies arose from a cooperation between the hardware specialists at PHANTEKS & Seasonic offering a combination of premium quality components as well as unparalleled efficiency The fully modular as well as high-performance supplies include 80 PLUS Gold certification & also happen to be compatible with the Revolt PRO-series of power supplies from PHANTEKS
- meaning that they can be used as an upgrade or expansion A whisper-quiet 120 mm temperature-regulated fan & hybrid operating mode helps to ensure the power supply produces minimal noise THE FEATURES OF THE PHANTEKS AMP 750W POWER SUPPLY AT A GLANCE750 Watt PSU with powerful 62A single rail High efficiency thanks to 80 PLUS Gold certification Quiet 120 mm fan with semi-passive mode Fully modular cable management with flat cables Four 62-pin PCIe connectors for graphics cards Compatible with Revolt Pro Link POWER SUPPLY WITH 80 PLUS GOLD EFFICIENCY & POWERFUL 62A SINGLE RAILThe PHANTEKS AMP 750W is a high-performance power supply capable of delivering 750 Watts of total output meaning that even high-end gaming PCs will have all the power they require The powerful 12 Volt rail delivers a full 62 Ampere & the 80 PLUS Gold certification means users can rest assured that the power supply wastes no heat or power unnecessarily The electrical components are also of exceptionally high quality with PHANTEKS opting instead for premium 105&176;-rated capacitors from Japan The fully modular cable system allows for a clean & tidy interior devoid of excess cabling & thereby helps ensure optimal airflow The PHANTEKS AMP 750W

Includes:: in addition to a 24-pin cable & two 44-pin cables four 62-pin PCIe connectors as well as eight SATA- & three 4-pin Molex connectors This wide variety of connectivity options means that even enthusiasts' systems will not have to make compromises Visually the black power supply is quite reserved & attractive & the light grey motif means it blends in perfectly with a case like the Enthoo Evolv X for example which has a cut-out in the PSU shroud that would help show off the supply ADJUSTABLE FAN CONTROLLER & REVOLT PRO LINKThe installed 120 mm fan offers quiet-running Fluid Dynamic Bearings meaning that not only do they produce minimal noise they are also exceptionally durable over time The hybrid switch on the back of the power supply allows users to select a semi-passive mode if needed This means that once again the power supply does not disappoint when it comes to minimising noise & maximising performance depending on the use case scenario The PHANTEKS AMP 750W is certified for use with the Revolt Pro Link & can be used in conjunction with a Revolt Pro power supply PHANTEKS equips the Revolt Pro-series of power supplies with 24-pin- & 8-pin connectors that allow a second Revolt Pro-series- or AMP-series power supply to be connected This means that users can benefit from even greater total output in the future if needed or opt for the peace of mind that comes with having a second redundant power supply on hand It almost goes without saying at this point that the PHANTEKS AMP 750W power supply

Includes:: all the requisite safety features that we have come to expect from modern high-end power supplies in addition the manufacturer also stands confidently behind their product with a guarantee that lasts a full ten years Technical Details Dimensions 150 x 86 x 140 mm (W x H x D) Fan 120 mm (Fluid Dynamic Bearing automatic control with semi-passive mode) Efficiency 879087 2050100 Load 80 PLUS Gold certification Active PFCForm factor ATX12 V Output 750 W33V 20 A5V 20 A33V &38; 5V 100 W12V 62 A 744 W-12V 03 A 36 W5VSB 3 A 15 WConnectivity (removable)1x 24-Pin 2x 44-Pin 4x 62-Pin-PCIe 8x SATA3x 4-Pol-Molex 1x Adapter 4-pin Molex to 2x SATA
Includes:1x PHANTEKS AMP PSUPower cable Instructions Cable ties Disposable cable ties Connecting cable Screws Manufacturer's guarantee 10 Years





...

Also part of Phanteks& growing array of accessories is the Phanteks 3-pin Digital RGB LED Y Extension Cable featuring two Phanteks digital RGB LED products on compatible ASUS & MSI motherboards & the Phanteks Digital RGB Controller Hub can be connected for addressable LEDs The Y extension cable is about 40 cm long & ends in two 3-pin connectors The 3-pin Digital RGB LED Y extension cable from Phanteks is specially designed for use on motherboards with ASUS Aura Sync Addressable & MSI Mystic Light Sync Rainbow certified Thus the illumination of the individual LEDs of a corresponding digital RGB LED product such as the Phanteks Halos Digital can be controlled directly from the motherboard software These allow an extreme customization of the lighting effects in all colours of the rainbow Technical details- Length approx 400 mm- Colour Black- Connections 2x 3-pin digital RGB plug 1x 3-pin digital RGB socket ...

Go beyond RGB with Digital-RGB from Phanteks With Digital-RGB each LED is controlled individually (addressable) featuring more patterns & color modes With Phantek’s D-RGB starter kit you’ll have everything you need to get started with Digital RGB lighting The starter kit comes included with the D-RGB controller hub a remote & 2x D-RGB LED strips to light up your PC enclosure right away Take immediate control of your lighting using the remote & choose from the best selection of custom color mode or sync the controller hub with a compatible motherboard & take control through the motherboard’s software Features- Customize your lighting with Phantek’s D-RGB controller- Preprogrammed with the best selection of colour modes & patterns- Easy control with a simple 3-button remote- Works right away without the installation of additional third party software
- Sync your Digital RGB controller to your (addressable) motherboard with the included D-RGB Motherboard adapter
- Expand the motherboard supported power output from 3 to 9 Phanteks Digital RGB products Specifications- Model NO PH-DRGBSKT- UPC Code 886523001348- Mounting Magnets- Connector Input 3 pin female Extension male to female extension cable MB Adapter Digital RGB adapter 3pin (5 V Data NAGND)- Input Voltage 5V- Current 072A 400mm- Wattage 36W 400mm- Compatibility Phanteks 3 pin connector MB 3 pin DRGB Header (5VDATANAGND)- LED Spec Digital RGB- LED count 30 LED 400mm- MTBF 20000 hr

...

Phanteks dual 525” bay bracket features a metal housing with an aluminum faceplate & is specifically designed for the Enthoo Luxe 2 The dual 525” bay provides placement for an optional ODD bay to your Enthoo Luxe 2 case Easy to install & allows for 2x ODD or other 525" devices to be mounted inside the Enthoo Luxe 2 Technical Details- Model NO PH-ODDBAY01-

Dimensions 165 x 168 x 230mm 65 x 661 x 91 in

...

The cases of the Eclipse P300 series provide entry-level prices with professional-level features prfect for newbies & PC enthusiasts alike with an array of interesting features With an illuminated power button as well as an LED strip on the left side the Dutch company brings the goods when it comes to RGB lighting
- just as you'd expect What makes the Eclipse P300A special however is without doubt the stunning side window that comes in tinted & tempered real glass meaning that users will enjoy a breathtaking view of the full interior of their PC Needless to say this leaves quite an impression THE PHANTEKS ECLIPSE P300 AIR MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass side window Mesh front with optimised structure for maximum airflow Compatible with motherboards up to ATX form factor Plenty of space for air- or water cooling A 120 mm fan comes pre-installed as standard 1x 25 slot &38; 2x 25-35 slot Graphics cards up to 355 mm long supported Removable magnetic dust filter in roof PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; MESH FRONTThe PHANTEKS Eclipse P300 Air Midi-Tower from the PHANTEKS Eclipse series makes quite the impression with its use of clean lines with a premium yet reserved design in satin-black The large tinted & tempered glass side window lends the case an undeniably high-end enthusiast look The front of the case is equipped with optimised mesh to help take airflow up another level as such cooling has been front & centre of PHANTEKS' development process Located in the centre of the roof & towards the front users will see the illuminated power button while both audio connectors & USB (Universal Serial Bus) 30 ports of the front panel are angled towards the right side The majority of the roof is taken up by the presence of a large removable dust filter which has the look of a kind of mesh grid & is situated over the top of the requisite air inlets MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDSThe black interior of the Eclipse P300A also manages to distinguish itself from the competition with its ultra-premium looks & the PSU shroud that is subdivided into two sections This means that the PSU shroud is able to conceal the drive bays which are rotated to a 90-degree angle These enable tool-free installation of two 35- or 25 drives via the front after removing the front cover of course Behind the motherboard tray users will be pleased to know that an SSD can be mounted using the Drop-N-Lock SSD bracket with a second bracket also possible as an upgrade In terms of cable management the case reserves 3.5cm of space meaning that there's more than enough room to stow things away neatly Hook & loop fastener cable guides also help users get an extremely clean case interior For casual- & hardcore gamers the PHANTEKS Eclipse P300 Air offers all the mod-cons for high-end gaming hardware that you could expect for example graphics cards up to 355 mm in length are compatible & the presence of radiator mountings for Ai O- & custom water cooling solutions The rear of the case offers a mounting point for one 120 mm fan or similar-sized radiator while the front supports either two 120 mm fans or 140 mm fans As an alternative to the front-mounted fans either a 240- or 280 mm radiator can be installed instead In addition to the pre-installed 120 mm fan in the rear a 120- or 140 mm case fan can be mounted in the roof of the case Those who prefer to use tall CPU coolers are well taken care of thanks to compatibility for coolers up to a height of 165 cm Power supplies up to 200 mm in length are compatible for powering your new high-end gaming system Technical Details Dimensions 200 x 455 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black Form factor ATX Micro-ATX Mini-ITXTotal fans possible 2x 120140 mm (Front)1x 120140 mm (Roof)1x 120 mm (Rear) Pre-installed 1x 120 mm (rear) Radiator Mountings (partially forfeits HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive bays 1x 25 Zoll (behind motherboard tray 1x additional possible via optional SSD bracket)2x 2535 (internal; tool-free installation) Power supply 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power Button 2x USB (Universal Serial Bus) 302x Audio Max GPU length 355 mm Max CPU cooler height 165 mm Max PSU length 200 mm Front Radiator 240 122 x 315 mm 280 142 x 315 mm
...

The cases of the Eclipse P300 series are directed towards beginners while also offering interesting features for experienced PC enthusiasts With an RGB-LED power button as well as an LED strip on the left side the Dutch manufacturer offer a range of colourful highlights as you would expect! The unique feature of the Eclipse P300 is without doubt the modern side panel in tempered- as well as tinted glass which offers you a breathtaking view of the installed hardware & an all-round premium appearance THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water-cooling 120 Millimetre fan pre-installed 1x 25 slot &38; 2x 25-35 slots Graphics cards up to 330 mm in length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower offered here hails from the Phanteks Eclipse series & makes a striking visual impression with its clean lines & premium perhaps even somewhat reserved design in black The unibody front panel as well as the large side panel in tinted tempered glass lends the case a very premium look which with the help of the LED lighting beneath the large tempered glass window looks even better The fins on the top in the front which also help with ventilation offer a welcome contrast to the sleek uniformity of the front panel In the middle of the front of the lid is located an RGB-LED backlit power button while both audio connectors & USB (Universal Serial Bus) 30 ports are situated parallel to the front panel Even the button for controlling the LEDs is located here on the Eclipse P300 The roof also holds a large removable mesh grill that acts as a dust filter & air vent MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER-COOLINGThanks to the black paintwork even the interior of the black Eclipse P300 gives off a premium look the interior is also divided into two parts by means of a PSU shroud This PSU shroud also conveniently hides the drive bays which are rotated to a 90&176; angle & these bays allow for tool-free installation of two 35 or 25 data storage devices on the front after removal of the front cover An SSD can be installed behind the motherboard tray with the help of a Drop-N-Lock SSD bracket & a second bracket can be optionally installed With 3.5cm of space there is plenty of room for cable management Hook & loop fastener cable ties also enable users to guide cables cleanly through the case Gamers & enthusiasts will be well catered for by the high-end gamer hardware options compatible with the Phanteks Eclipse P300 including compatibility with graphics cards up to 330 mm in length & radiator mounting for Ai O coolers & custom water-cooling The rear of the case enables 120 mm installation of a 120 mm fan while the front can hold two 120- or 140 mm fans As an alternative to the front fans a 240 or 280 mm heat exchanger can be installed in the front instead Besides the pre-installed 120 mm fans in the rear a 120- or 140 mm case fan can be installed in the roof For those who would like to use a regular CPU cooler on their processor coolers up to 16 cm in height are compatible while power supplies up to 197 mm in length can be installed to provide the gaming system with power The LED lighting is powered via 12 Volt SATA cable & a 4-pin connector allows the case's LED lighting to be connected to an optional LED controller or motherboard with compatible RGB connectors Furthermore the case is with the help of the optional RGB motherboard adapters compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light These allow the motherboard's lighting to be adjusted to coordinate with the lighting installed within the case the result of this is a gaming PC that can have a matching colour scheme alongside matching LED effects Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel Plastic Tempered Glass Colour Black Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (Front)1x 140 120 mm (Top)1x 120 mm (Rear) Pre-Installed Fans 1x 120 mm (Rear) Radiator Mountings (may partly occlude HDD andor fan slots)1x max 240280 mm (Front)1x max 120 mm (Rear) Filter Front PSU Roof (removable) Drive Bays 1x 25 (behind motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-free installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black Red Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black White Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...