Also part of Phanteks& growing array of accessories is the Phanteks 3-pin Digital RGB LED Y Extension Cable featuring two Phanteks digital RGB LED products on compatible ASUS & MSI motherboards & the Phanteks Digital RGB Controller Hub can be connected for addressable LEDs The Y extension cable is about 40 cm long & ends in two 3-pin connectors The 3-pin Digital RGB LED Y extension cable from Phanteks is specially designed for use on motherboards with ASUS Aura Sync Addressable & MSI Mystic Light Sync Rainbow certified Thus the illumination of the individual LEDs of a corresponding digital RGB LED product such as the Phanteks Halos Digital can be controlled directly from the motherboard software These allow an extreme customization of the lighting effects in all colours of the rainbow Technical details- Length approx 400 mm- Colour Black- Connections 2x 3-pin digital RGB plug 1x 3-pin digital RGB socket ...

Go beyond RGB with Digital-RGB from Phanteks With Digital-RGB each LED is controlled individually (addressable) featuring more patterns & color modes With Phantek’s D-RGB starter kit you’ll have everything you need to get started with Digital RGB lighting The starter kit comes included with the D-RGB controller hub a remote & 2x D-RGB LED strips to light up your PC enclosure right away Take immediate control of your lighting using the remote & choose from the best selection of custom color mode or sync the controller hub with a compatible motherboard & take control through the motherboard’s software Features- Customize your lighting with Phantek’s D-RGB controller- Preprogrammed with the best selection of colour modes & patterns- Easy control with a simple 3-button remote- Works right away without the installation of additional third party software
- Sync your Digital RGB controller to your (addressable) motherboard with the included D-RGB Motherboard adapter
- Expand the motherboard supported power output from 3 to 9 Phanteks Digital RGB products Specifications- Model NO PH-DRGBSKT- UPC Code 886523001348- Mounting Magnets- Connector Input 3 pin female Extension male to female extension cable MB Adapter Digital RGB adapter 3pin (5 V Data NAGND)- Input Voltage 5V- Current 072A 400mm- Wattage 36W 400mm- Compatibility Phanteks 3 pin connector MB 3 pin DRGB Header (5VDATANAGND)- LED Spec Digital RGB- LED count 30 LED 400mm- MTBF 20000 hr

...

Phanteks’ Digital RGB LED Combo Kit provides lighting solution that seamlessly integrate to your Phanteks’ D-RGB products & compatible D-RGB motherboards to enhance your lighting experiences Our kit

Includes:: two 40cm D-RGB LED Strips & a MB D-RGB adapter to offer a simple & convenient way to light up your build Features- Comes with 2x included 40CM D-RGB LED strips- Each strip is equipped with 30x LED’s to spread light bright & evenly with smooth colour transitions
- Daisy-chain connectors for more D-RGB connections- Sync with compatible D-RGB Motherboard or Phanteks Digital RGB Controller- Compatible with Asus Aura Sync & MSI Mystic Light Sync Specifications- Model NO PH-DRGBLEDCMBO- UPC Code 886523001133- Mounting Magnets- Connector Input 3 pin female Extension male to female extension cable MB Adapter Digital RGB adapter 3pin (5 V Data NAGND)- Input Voltage 5V- Current 072A 400mm- Wattage 36W 400mm- Compatibility Phanteks 3 pin connector MB 3 pin DRGB Header (5VDATANAGND)- LED Spec Digital RGB- LED count 30 LED 400mm- MTBF 20000 hr- Contents 2x 400mm Strip 1x Extension 1x MB RGB Adapter 4x 3M Strip Stickers


...

Phanteks dual 525” bay bracket features a metal housing with an aluminum faceplate & is specifically designed for the Enthoo Luxe 2 The dual 525” bay provides placement for an optional ODD bay to your Enthoo Luxe 2 case Easy to install & allows for 2x ODD or other 525" devices to be mounted inside the Enthoo Luxe 2 Technical Details- Model NO PH-ODDBAY01-

Dimensions 165 x 168 x 230mm 65 x 661 x 91 in

...

The cases of the Eclipse P300 series provide entry-level prices with professional-level features prfect for newbies & PC enthusiasts alike with an array of interesting features With an illuminated power button as well as an LED strip on the left side the Dutch company brings the goods when it comes to RGB lighting
- just as you'd expect What makes the Eclipse P300A special however is without doubt the stunning side window that comes in tinted & tempered real glass meaning that users will enjoy a breathtaking view of the full interior of their PC Needless to say this leaves quite an impression THE PHANTEKS ECLIPSE P300 AIR MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass side window Mesh front with optimised structure for maximum airflow Compatible with motherboards up to ATX form factor Plenty of space for air- or water cooling A 120 mm fan comes pre-installed as standard 1x 25 slot &38; 2x 25-35 slot Graphics cards up to 355 mm long supported Removable magnetic dust filter in roof PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; MESH FRONTThe PHANTEKS Eclipse P300 Air Midi-Tower from the PHANTEKS Eclipse series makes quite the impression with its use of clean lines with a premium yet reserved design in satin-black The large tinted & tempered glass side window lends the case an undeniably high-end enthusiast look The front of the case is equipped with optimised mesh to help take airflow up another level as such cooling has been front & centre of PHANTEKS' development process Located in the centre of the roof & towards the front users will see the illuminated power button while both audio connectors & USB (Universal Serial Bus) 30 ports of the front panel are angled towards the right side The majority of the roof is taken up by the presence of a large removable dust filter which has the look of a kind of mesh grid & is situated over the top of the requisite air inlets MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDSThe black interior of the Eclipse P300A also manages to distinguish itself from the competition with its ultra-premium looks & the PSU shroud that is subdivided into two sections This means that the PSU shroud is able to conceal the drive bays which are rotated to a 90-degree angle These enable tool-free installation of two 35- or 25 drives via the front after removing the front cover of course Behind the motherboard tray users will be pleased to know that an SSD can be mounted using the Drop-N-Lock SSD bracket with a second bracket also possible as an upgrade In terms of cable management the case reserves 3.5cm of space meaning that there's more than enough room to stow things away neatly Hook & loop fastener cable guides also help users get an extremely clean case interior For casual- & hardcore gamers the PHANTEKS Eclipse P300 Air offers all the mod-cons for high-end gaming hardware that you could expect for example graphics cards up to 355 mm in length are compatible & the presence of radiator mountings for Ai O- & custom water cooling solutions The rear of the case offers a mounting point for one 120 mm fan or similar-sized radiator while the front supports either two 120 mm fans or 140 mm fans As an alternative to the front-mounted fans either a 240- or 280 mm radiator can be installed instead In addition to the pre-installed 120 mm fan in the rear a 120- or 140 mm case fan can be mounted in the roof of the case Those who prefer to use tall CPU coolers are well taken care of thanks to compatibility for coolers up to a height of 165 cm Power supplies up to 200 mm in length are compatible for powering your new high-end gaming system Technical Details Dimensions 200 x 455 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black Form factor ATX Micro-ATX Mini-ITXTotal fans possible 2x 120140 mm (Front)1x 120140 mm (Roof)1x 120 mm (Rear) Pre-installed 1x 120 mm (rear) Radiator Mountings (partially forfeits HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front PSU roof (removable) Drive bays 1x 25 Zoll (behind motherboard tray 1x additional possible via optional SSD bracket)2x 2535 (internal; tool-free installation) Power supply 1x Standard ATX (optional) Expansion slots 7IO Panel 1x Power Button 2x USB (Universal Serial Bus) 302x Audio Max GPU length 355 mm Max CPU cooler height 165 mm Max PSU length 200 mm Front Radiator 240 122 x 315 mm 280 142 x 315 mm
...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black Red Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black White Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Velcro cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour White Black Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse Series' P350X from Phanteks is targeted at new arrivals to the world of PC building while also offering a variety of ingenious features for experienced PC enthusiasts Equipped with RGB-LED strips along the front panel & an additional strip along the side panel beneath the tempered glass window the case provides the vibrant colours & highlights that we've come to expect from the Dutch manufacturer over the years! When compared to its smaller siblings in the P300 series rather than growing taller the P350X has expanded towards the back This drastically expands users' options for installing cooling & the support for motherboards up to E-ATX in size is also a welcome addition The upper area of this attractive case also comes complete with tempered glass which enables an unobstructed view of the tidy interior as well as your chosen hardware The lower section also serves as an inbuilt shroud for the power supply THE ECLIPSE P350X MIDI-TOWER FROM PHANTEKS AT A GLANCEStylish Midi-style case with tempered glass side panel Compatible with E-ATX motherboards (up to 280 mm) Plenty of space for fans & radiators 3x 25 slots &38; 2x 25-35 slots Graphics cards up to 40 cm long Striking front complete with side-facing air inlets & RGB-LED lighting IMPROVED AIRFLOW & PLENTY OF SPACE FOR HARDWAREThe black Eclipse P350X Midi-Tower with white interior from Phanteks' Eclipse series offers a premium-looking & pleasantly reserved aesthetic with plenty of clean lines The smooth uninterrupted lines of the front panel lend the case a high-end look that is off-set by the addition of RGB-LED lighting The side-facing air inlets have been expanded in this version making them somewhat larger than those of the P300 They also come equipped with dust covers All in all while they make a noticeable improvement in terms of airflow they also add a certain something to the case's overall appearance as well The IO panel is located towards the front of the case along the upper edge with a power switch located in the centre that also serves as the reset button Two switches for controlling RGB modes & speeds are located next to this The digitally addressable RGB-LED strips can also be if you prefer connected directly to the motherboard by means of the 3-pin connector Both audio jacks are located just behind these along with both USB (Universal Serial Bus) 30 ports The majority of the case's roof is covered by a large removable magnetic dust filter that has the appearance of a large mesh grid One of the case's large air flow inlets is located beneath this PLENTY OF SPACE FOR FANS & RADIATORSThe interior of this version of the Eclipse P350X is exceptionally easy on the eye thanks to the white paintwork & the power supply's shroud also functions to break up the interior into two sections This enables the PSU shroud to also cover both drive bays which themselves allow for tool-free installation of up to two 35 HDDs via the front Installation of course requires the front first be removed Up to two SSDs can be installed into Drop-N-Lock-style SSD brackets behind the motherboard tray There is also space for an optional third bracket The case offers a generous 36 mm of space for cable management Hook & loop fastener cable guides also help to make keeping the interior nice & tidy a breeze Casual- & hardcore gamers enjoy a range of options when it comes to high-end gaming hardware in the Phanteks Eclipse P350X with support for graphics cards up to 400 mm in length as well as radiator mountings for Ai O water coolers & custom cooling As such the rear of the case offers space for a 120 mm fan or a similarly proportioned radiator while the front sets aside space for two 120 mm- or 140 mm fans As an alternative to front-facing fans users are also free to install 240 mm- or 280 mm radiators in the front Apart from the pre-installed 120 mm front-facing fan up to two 120 mm or 140 mm case fans may be installed in the roof of the case Those preferring to equip their processor with standard-style CPU cooling are well catered for with compatibility for coolers up to 16 cm in height while power supplies up to 240 mm long can also be installed to ensure your gaming system is supplied with all the necessary power A further dust filter is to be found beneath the PSU Technical Details Dimensions 200 x 450 x 455 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black (case) White (interior) Form Factor E-ATX (up to 280 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140120 mm (Front)2x 140120 mm (Top)1x 120 mm (Rear) Pre-Installed Fans 1x 120 mm (Front) Radiator Mountings (forfeits HDD- andor fan slots)1x max 240280 mm (Front)1x max 120 mm (Rear) Filter Front PSU Top (removable) Drive Bays 3x 25 (internal; tool-free installation)2x 35 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button 1x RGB-LED Controller (mode)1x RGB-LED Controller (speed)2x USB (Universal Serial Bus) 302x Audio Maximum Graphics Card Length 400 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 240 mm ...

ECLIPSE P360 AIR MID TOWER CASE TEMPERED GLASS DRGB
- SATIN BLACKs P360A is the newest member of the Elispe line of PC cases It
...