The AMP series of power supplies arose from a cooperation between the hardware specialists at PHANTEKS & Seasonic offering a combination of premium quality components as well as unparalleled efficiency The fully modular as well as high-performance supplies include 80 PLUS Gold certification & also happen to be compatible with the Revolt PRO-series of power supplies from PHANTEKS
- meaning that they can be used as an upgrade or expansion A whisper-quiet 120 mm temperature-regulated fan & hybrid operating mode helps to ensure the power supply produces minimal noise THE FEATURES OF THE PHANTEKS AMP 750W POWER SUPPLY AT A GLANCE750 Watt PSU with powerful 62A single rail High efficiency thanks to 80 PLUS Gold certification Quiet 120 mm fan with semi-passive mode Fully modular cable management with flat cables Four 62-pin PCIe connectors for graphics cards Compatible with Revolt Pro Link POWER SUPPLY WITH 80 PLUS GOLD EFFICIENCY & POWERFUL 62A SINGLE RAILThe PHANTEKS AMP 750W is a high-performance power supply capable of delivering 750 Watts of total output meaning that even high-end gaming PCs will have all the power they require The powerful 12 Volt rail delivers a full 62 Ampere & the 80 PLUS Gold certification means users can rest assured that the power supply wastes no heat or power unnecessarily The electrical components are also of exceptionally high quality with PHANTEKS opting instead for premium 105&176;-rated capacitors from Japan The fully modular cable system allows for a clean & tidy interior devoid of excess cabling & thereby helps ensure optimal airflow The PHANTEKS AMP 750W

Includes:: in addition to a 24-pin cable & two 44-pin cables four 62-pin PCIe connectors as well as eight SATA- & three 4-pin Molex connectors This wide variety of connectivity options means that even enthusiasts' systems will not have to make compromises Visually the black power supply is quite reserved & attractive & the light grey motif means it blends in perfectly with a case like the Enthoo Evolv X for example which has a cut-out in the PSU shroud that would help show off the supply ADJUSTABLE FAN CONTROLLER & REVOLT PRO LINKThe installed 120 mm fan offers quiet-running Fluid Dynamic Bearings meaning that not only do they produce minimal noise they are also exceptionally durable over time The hybrid switch on the back of the power supply allows users to select a semi-passive mode if needed This means that once again the power supply does not disappoint when it comes to minimising noise & maximising performance depending on the use case scenario The PHANTEKS AMP 750W is certified for use with the Revolt Pro Link & can be used in conjunction with a Revolt Pro power supply PHANTEKS equips the Revolt Pro-series of power supplies with 24-pin- & 8-pin connectors that allow a second Revolt Pro-series- or AMP-series power supply to be connected This means that users can benefit from even greater total output in the future if needed or opt for the peace of mind that comes with having a second redundant power supply on hand It almost goes without saying at this point that the PHANTEKS AMP 750W power supply

Includes:: all the requisite safety features that we have come to expect from modern high-end power supplies in addition the manufacturer also stands confidently behind their product with a guarantee that lasts a full ten years Technical Details Dimensions 150 x 86 x 140 mm (W x H x D) Fan 120 mm (Fluid Dynamic Bearing automatic control with semi-passive mode) Efficiency 879087 2050100 Load 80 PLUS Gold certification Active PFCForm factor ATX12 V Output 750 W33V 20 A5V 20 A33V &38; 5V 100 W12V 62 A 744 W-12V 03 A 36 W5VSB 3 A 15 WConnectivity (removable)1x 24-Pin 2x 44-Pin 4x 62-Pin-PCIe 8x SATA3x 4-Pol-Molex 1x Adapter 4-pin Molex to 2x SATA
Includes:1x PHANTEKS AMP PSUPower cable Instructions Cable ties Disposable cable ties Connecting cable Screws Manufacturer's guarantee 10 Years





...

Also part of Phanteks& growing array of accessories is the Phanteks 3-pin Digital RGB LED Y Extension Cable featuring two Phanteks digital RGB LED products on compatible ASUS & MSI motherboards & the Phanteks Digital RGB Controller Hub can be connected for addressable LEDs The Y extension cable is about 40 cm long & ends in two 3-pin connectors The 3-pin Digital RGB LED Y extension cable from Phanteks is specially designed for use on motherboards with ASUS Aura Sync Addressable & MSI Mystic Light Sync Rainbow certified Thus the illumination of the individual LEDs of a corresponding digital RGB LED product such as the Phanteks Halos Digital can be controlled directly from the motherboard software These allow an extreme customization of the lighting effects in all colours of the rainbow Technical details- Length approx 400 mm- Colour Black- Connections 2x 3-pin digital RGB plug 1x 3-pin digital RGB socket ...

Go beyond RGB with Digital-RGB from Phanteks With Digital-RGB each LED is controlled individually (addressable) featuring more patterns & color modes With Phantek’s D-RGB starter kit you’ll have everything you need to get started with Digital RGB lighting The starter kit comes included with the D-RGB controller hub a remote & 2x D-RGB LED strips to light up your PC enclosure right away Take immediate control of your lighting using the remote & choose from the best selection of custom color mode or sync the controller hub with a compatible motherboard & take control through the motherboard’s software Features- Customize your lighting with Phantek’s D-RGB controller- Preprogrammed with the best selection of colour modes & patterns- Easy control with a simple 3-button remote- Works right away without the installation of additional third party software
- Sync your Digital RGB controller to your (addressable) motherboard with the included D-RGB Motherboard adapter
- Expand the motherboard supported power output from 3 to 9 Phanteks Digital RGB products Specifications- Model NO PH-DRGBSKT- UPC Code 886523001348- Mounting Magnets- Connector Input 3 pin female Extension male to female extension cable MB Adapter Digital RGB adapter 3pin (5 V Data NAGND)- Input Voltage 5V- Current 072A 400mm- Wattage 36W 400mm- Compatibility Phanteks 3 pin connector MB 3 pin DRGB Header (5VDATANAGND)- LED Spec Digital RGB- LED count 30 LED 400mm- MTBF 20000 hr

...

Phanteks’ Digital RGB LED Combo Kit provides lighting solution that seamlessly integrate to your Phanteks’ D-RGB products & compatible D-RGB motherboards to enhance your lighting experiences Our kit

Includes:: two 40cm D-RGB LED Strips & a MB D-RGB adapter to offer a simple & convenient way to light up your build Features- Comes with 2x included 40CM D-RGB LED strips- Each strip is equipped with 30x LED’s to spread light bright & evenly with smooth colour transitions
- Daisy-chain connectors for more D-RGB connections- Sync with compatible D-RGB Motherboard or Phanteks Digital RGB Controller- Compatible with Asus Aura Sync & MSI Mystic Light Sync Specifications- Model NO PH-DRGBLEDCMBO- UPC Code 886523001133- Mounting Magnets- Connector Input 3 pin female Extension male to female extension cable MB Adapter Digital RGB adapter 3pin (5 V Data NAGND)- Input Voltage 5V- Current 072A 400mm- Wattage 36W 400mm- Compatibility Phanteks 3 pin connector MB 3 pin DRGB Header (5VDATANAGND)- LED Spec Digital RGB- LED count 30 LED 400mm- MTBF 20000 hr- Contents 2x 400mm Strip 1x Extension 1x MB RGB Adapter 4x 3M Strip Stickers


...

Phanteks dual 525” bay bracket features a metal housing with an aluminum faceplate & is specifically designed for the Enthoo Luxe 2 The dual 525” bay provides placement for an optional ODD bay to your Enthoo Luxe 2 case Easy to install & allows for 2x ODD or other 525" devices to be mounted inside the Enthoo Luxe 2 Technical Details- Model NO PH-ODDBAY01-

Dimensions 165 x 168 x 230mm 65 x 661 x 91 in

...

The cases of the Eclipse P300 series are directed towards beginners while also offering interesting features for experienced PC enthusiasts With an RGB-LED power button as well as an LED strip on the left side the Dutch manufacturer offer a range of colourful highlights as you would expect! The unique feature of the Eclipse P300 is without doubt the modern side panel in tempered- as well as tinted glass which offers you a breathtaking view of the installed hardware & an all-round premium appearance THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water-cooling 120 Millimetre fan pre-installed 1x 25 slot &38; 2x 25-35 slots Graphics cards up to 330 mm in length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower offered here hails from the Phanteks Eclipse series & makes a striking visual impression with its clean lines & premium perhaps even somewhat reserved design in black The unibody front panel as well as the large side panel in tinted tempered glass lends the case a very premium look which with the help of the LED lighting beneath the large tempered glass window looks even better The fins on the top in the front which also help with ventilation offer a welcome contrast to the sleek uniformity of the front panel In the middle of the front of the lid is located an RGB-LED backlit power button while both audio connectors & USB (Universal Serial Bus) 30 ports are situated parallel to the front panel Even the button for controlling the LEDs is located here on the Eclipse P300 The roof also holds a large removable mesh grill that acts as a dust filter & air vent MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER-COOLINGThanks to the black paintwork even the interior of the black Eclipse P300 gives off a premium look the interior is also divided into two parts by means of a PSU shroud This PSU shroud also conveniently hides the drive bays which are rotated to a 90&176; angle & these bays allow for tool-free installation of two 35 or 25 data storage devices on the front after removal of the front cover An SSD can be installed behind the motherboard tray with the help of a Drop-N-Lock SSD bracket & a second bracket can be optionally installed With 3.5cm of space there is plenty of room for cable management Hook & loop fastener cable ties also enable users to guide cables cleanly through the case Gamers & enthusiasts will be well catered for by the high-end gamer hardware options compatible with the Phanteks Eclipse P300 including compatibility with graphics cards up to 330 mm in length & radiator mounting for Ai O coolers & custom water-cooling The rear of the case enables 120 mm installation of a 120 mm fan while the front can hold two 120- or 140 mm fans As an alternative to the front fans a 240 or 280 mm heat exchanger can be installed in the front instead Besides the pre-installed 120 mm fans in the rear a 120- or 140 mm case fan can be installed in the roof For those who would like to use a regular CPU cooler on their processor coolers up to 16 cm in height are compatible while power supplies up to 197 mm in length can be installed to provide the gaming system with power The LED lighting is powered via 12 Volt SATA cable & a 4-pin connector allows the case's LED lighting to be connected to an optional LED controller or motherboard with compatible RGB connectors Furthermore the case is with the help of the optional RGB motherboard adapters compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light These allow the motherboard's lighting to be adjusted to coordinate with the lighting installed within the case the result of this is a gaming PC that can have a matching colour scheme alongside matching LED effects Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel Plastic Tempered Glass Colour Black Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (Front)1x 140 120 mm (Top)1x 120 mm (Rear) Pre-Installed Fans 1x 120 mm (Rear) Radiator Mountings (may partly occlude HDD andor fan slots)1x max 240280 mm (Front)1x max 120 mm (Rear) Filter Front PSU Roof (removable) Drive Bays 1x 25 (behind motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-free installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black Red Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Hook & loop fastener cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour Black White Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse P300 Series cases from Phanteks are directed towards those who might be new arrivals to the world of PC hardware but while that may be the case there's no doubt as to the pedigree of this housing & the extensive features & expandability it offers Equipped with an RGB-LED power button as well as an LED strip on the left hand side the Netherlands-based manufacturer provides the case with a range of colour options! The special feature of the Eclipse P300 is undoubtedly the stylish tinted- tempered glass side window that makes for a breathtaking view of your installed hardware Needless to say your entire PC will become a veritable picture of RGB gaming perfection THE PHANTEKS ECLIPSE P300 MIDI-TOWER WITH TEMPERED GLASS AT A GLANCEPremium Midi-Tower with tempered glass window Compatible with motherboards up to E-ATXPlenty of space for air- or water cooling 120 mm fan pre-installed 1x 25 slots &38; 2x 25-35 slots Graphics cards up to 330 mm length Compatible with AURA Sync RGB Fusion &38; Mystic Light Sync PREMIUM TEMPERED GLASS WINDOW MIDI-TOWER &38; LED LIGHTINGThe Phanteks Eclipse P300 Midi-Tower on offer here is from the Phanteks Eclipse series & offers impressive aesthetics with its clean lines & premium perhaps even somewhat reserved black design with a red interior The one-piece front panel & the large tinted tempered glass side window lends the case an exceptionally premium look & this is enhanced yet further with the help of the LED lighting below the huge tempered glass window The fins on the upper section of the front which conveniently also serve as vents offer a welcome contrast to the sleek uniformity of the front panel Towards the front of the top of the case is located the RGB-LED illuminated power button while both audio jacks along with the front panel USB (Universal Serial Bus) 30 ports are located on the sides & angled towards the right The button for controlling the LEDs is also located on this part of the Eclipse P300 The majority of the top of the case is taken up with a large removable dust filter that has the appearance of a large mesh grille & also rests on a large ventilation grille MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS &38; AIO WATER COOLINGEven the black interior of the Eclipse P300 impresses thanks to the black paintwork & the overall look remains tidy & clean thanks in part to the power supply shroud which divides the interior into two chambers In this way the power supply shroud also covers the 90&176;-angled drive bays These enable the tool-less installation of two 35- or 25 storage devices in the front after removing the front cover Behind the motherboard tray an SSD can be installed in the Drop-N-Lock-style SSD bracket A second bracket may be fitted optionally In terms of cable management the 3.5cm of space offers plenty of opportunities for an incredibly clean layout Velcro cable ties also go a long way towards making the cable management as clean as possible The Phanteks Eclipse P300 offers enthusiasts & hardcore gamers an extensive array of options in terms of installing high-end gaming hardware in the case for example graphics cards up to 330 mm long & radiator mountings for Ai O- & custom water cooling The rear of the case offers the option of installing a 120 mm fan or compatible radiator while the front allows for two 120- or 140 mm fans Alternatively the front-facing fans can be replaced with a 240- or 280 mm radiator In addition to the pre-installed 120 mm fan in the back a 120- or 140 mm case fan can be mounted in the top For those who would prefer to mount a regular CPU cooler on their processor can opt for a model up to 16 cm in height while power supplies up to 197 mm long can be installed to supply the gaming system with the requisite power The LED lighting is powered by means of a 12 V SATA cable & the case's LED lighting can be supplemented with the addition of an optional LED controller or a motherboard which offers a compatible RGB connector Furthermore the case is with the addition of an optional RGB motherboard adapter compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light which allows the motherboard's lighting to be synchronised with that of the case The end result is an RGB gaming PC whose lighting can be customised & coordinated to your heart's content Technical Details Dimensions 200 x 450 x 400 mm (W x H x D) Weight approx 6kg Material Steel plastic tempered glass Colour White Black Form Factor E-ATX (up to 275 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140 2x 120 mm (front)1x 140 120 mm (top)1x 120 mm (rear) Pre-Installed 1x 120 mm (rear) Radiator Mountings (partially blocks HDD- andor fan slots)1x max 240280 mm (front)1x max 120 mm (rear) Filter Front power supply top (removable) Drive Bays 1x 25 (behind the motherboard tray 1x additional via optional SSD bracket)2x 2535 (internal; tool-less installation) Power Supply 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button (with RGB-LED)1x LED Controller 2x USB (Universal Serial Bus) 302x Audio Maximum GPU Length 330 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 197 mm ...

The Eclipse Series' P350X from Phanteks is targeted at new arrivals to the world of PC building while also offering a variety of ingenious features for experienced PC enthusiasts Equipped with RGB-LED strips along the front panel & an additional strip along the side panel beneath the tempered glass window the case provides the vibrant colours & highlights that we've come to expect from the Dutch manufacturer over the years! When compared to its smaller siblings in the P300 series rather than growing taller the P350X has expanded towards the back This drastically expands users' options for installing cooling & the support for motherboards up to E-ATX in size is also a welcome addition The upper area of this attractive case also comes complete with tempered glass which enables an unobstructed view of the tidy interior as well as your chosen hardware The lower section also serves as an inbuilt shroud for the power supply THE ECLIPSE P350X MIDI-TOWER FROM PHANTEKS AT A GLANCEStylish Midi-style case with tempered glass side panel Compatible with E-ATX motherboards (up to 280 mm) Plenty of space for fans & radiators 3x 25 slots &38; 2x 25-35 slots Graphics cards up to 40 cm long Striking front complete with side-facing air inlets & RGB-LED lighting IMPROVED AIRFLOW & PLENTY OF SPACE FOR HARDWAREThe black Eclipse P350X Midi-Tower with white interior from Phanteks' Eclipse series offers a premium-looking & pleasantly reserved aesthetic with plenty of clean lines The smooth uninterrupted lines of the front panel lend the case a high-end look that is off-set by the addition of RGB-LED lighting The side-facing air inlets have been expanded in this version making them somewhat larger than those of the P300 They also come equipped with dust covers All in all while they make a noticeable improvement in terms of airflow they also add a certain something to the case's overall appearance as well The IO panel is located towards the front of the case along the upper edge with a power switch located in the centre that also serves as the reset button Two switches for controlling RGB modes & speeds are located next to this The digitally addressable RGB-LED strips can also be if you prefer connected directly to the motherboard by means of the 3-pin connector Both audio jacks are located just behind these along with both USB (Universal Serial Bus) 30 ports The majority of the case's roof is covered by a large removable magnetic dust filter that has the appearance of a large mesh grid One of the case's large air flow inlets is located beneath this PLENTY OF SPACE FOR FANS & RADIATORSThe interior of this version of the Eclipse P350X is exceptionally easy on the eye thanks to the white paintwork & the power supply's shroud also functions to break up the interior into two sections This enables the PSU shroud to also cover both drive bays which themselves allow for tool-free installation of up to two 35 HDDs via the front Installation of course requires the front first be removed Up to two SSDs can be installed into Drop-N-Lock-style SSD brackets behind the motherboard tray There is also space for an optional third bracket The case offers a generous 36 mm of space for cable management Hook & loop fastener cable guides also help to make keeping the interior nice & tidy a breeze Casual- & hardcore gamers enjoy a range of options when it comes to high-end gaming hardware in the Phanteks Eclipse P350X with support for graphics cards up to 400 mm in length as well as radiator mountings for Ai O water coolers & custom cooling As such the rear of the case offers space for a 120 mm fan or a similarly proportioned radiator while the front sets aside space for two 120 mm- or 140 mm fans As an alternative to front-facing fans users are also free to install 240 mm- or 280 mm radiators in the front Apart from the pre-installed 120 mm front-facing fan up to two 120 mm or 140 mm case fans may be installed in the roof of the case Those preferring to equip their processor with standard-style CPU cooling are well catered for with compatibility for coolers up to 16 cm in height while power supplies up to 240 mm long can also be installed to ensure your gaming system is supplied with all the necessary power A further dust filter is to be found beneath the PSU Technical Details Dimensions 200 x 450 x 455 mm (W x H x D) Weight approx 7kg Material Steel plastic tempered glass Colour Black (case) White (interior) Form Factor E-ATX (up to 280 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 2x 140120 mm (Front)2x 140120 mm (Top)1x 120 mm (Rear) Pre-Installed Fans 1x 120 mm (Front) Radiator Mountings (forfeits HDD- andor fan slots)1x max 240280 mm (Front)1x max 120 mm (Rear) Filter Front PSU Top (removable) Drive Bays 3x 25 (internal; tool-free installation)2x 35 (internal; tool-free installation)PSU 1x Standard ATX (optional) Expansion Slots 7IO Panel 1x Power Button 1x RGB-LED Controller (mode)1x RGB-LED Controller (speed)2x USB (Universal Serial Bus) 302x Audio Maximum Graphics Card Length 400 mm Maximum CPU Cooler Height 160 mm Maximum PSU Length 240 mm ...