About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Park Tool CP-1 Chain Whip Pliers
Park Tool CP-1 Chain
Whip Pliers
£53.99
Secure engagement, easy to use, & fast! The CP-1 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1 is 13.7 (35cm) long & can be used with one hand to hold cassettes solidly during lock ring removal. Forged steel construction with a spring loaded return & comfortable dual density grips. ...
Available
Park Tool CRC-1 Crown Race Cutting Tool
Park Tool CRC-1 Crown
Race Cutting Tool
£399.99
To ensure proper headset performance & longevity, special attention must be given to accurately machine the fork’s crown race seat. The CRC-1 is a professional quality machining tool for milling both the outer edge & lower surfaces of the crown race seat.

Includes:: high speed steel cutters & adjustable collets to machine 26.5mm & 27.1mm crown race seats on 1” forks & 30.1mm crown race seats on 1-1/8 forks. Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut & proper alignment of the fork in the frame.

...
Available
Park Tool CRC-15 Crown Race Cutter Adaptor
Park Tool CRC-15 Crown
Race Cutter Adaptor
£199.99
Used in conjunction with the CRC-1 Crown Race Cutting Tool to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes.

Includes:: precision-machined adaptor body & 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5 taper of 4.25 inches.

...
Available
Park Tool CRP-2 Adjustable Crown Race Puller
Park Tool CRP-2
Adjustable Crown Race
Puller
£202.50
The CRP-2 is a precision tool for quickly & easily removing the headset crown race from the crown race seat of the fork. New for 2013, the tool is fully adjustable, allowing precise, independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions. ...
Available
Park Tool CRS-1 Crown Race Setting System
Park Tool CRS-1 Crown
Race Setting System
£62.99
The CRS-1 offers a six inserts with to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube & into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube & seat the race into its proper place safely & accurately. The CRS-1 set

Includes:: one universal setting tube, three 1 inserts, & three 1-1/8 inserts. The CRS-1 will work on forks of 340mm column length or less.

...
Available
Park Tool CSB-1 Carbon Cutting Saw Blade
Park Tool CSB-1 Carbon
Cutting Saw Blade
£8.99
12 Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Fits Park Tool SAW-1 Hacksaw & most 12” hacksaws. The CSB-1 is designed for use with the SG-8 Saw Guide. NOTE: Similar to a grinding stone, do not use this blade on aluminium. ...
Available
Park Tool CT-11 Rivet Peening Tool For Campagnolo 11 Speed Chain
Park Tool CT-11 Rivet
Peening Tool For
Campagnolo 11
Speed Chain
£44.99
After pressing the special connecting rivet into a Campagnolo 11-Speed Chain & breaking off the pilot, Campagnolo requires the end of the connecting rivet to be peened or deformed to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. Note: The CT-11 will not install or remove chain rivets. Its sole function is to peen & secure the end of the Campagnolo 11-speed connecting rivet. The Park Tool CT-4.2 Master Chain Tool (or previous model CT-4) is used for rivet installation & removal. ...
Available
Park Tool CT-3.2 Chain Tool
Park Tool CT-3.2 Chain
Tool
£34.99
A shop favourite, the Park Tool CT-3.2 Chain Tool has been updated to work with almost any chain including 1/8, 3/16, single-speed & 5-11 speed chains. Due to the forces needed to remove chain pins, the CT-3.2 is made from investment cast stell for long life. ...
Available
Park Tool CT-5 Mini Chain Brute Chain Tool
Park Tool CT-5 Mini
Chain Brute Chain Tool
£14.99
This small chain tool goes anywhere & actually performs like a shop quality tool. The fine thread, special “V”- shaped handle, & super strong replaceable pin make chain removal & installation a breeze. ...
Available
Park Tool CT-6.3 Folding Chain Tool With Peening Anvil
Park Tool CT-6.3
Folding Chain Tool
With Peening Anvil
£31.49
Now 11-speed compatible, the CT-6.3 removes & installs chain pins in all derailleur chains. Smooth & powerful, this handy take along is encased in a stainless steel shell, which becomes a comfortable handle when opened. Also included is a peening anvil that allows for peening of Campagnolo 11-speed chains, which pivots out of the way when not in use. ...
Available

Park Tool CRS-15 1.5 Inch Crown Race Setter

The CRS-15 uses two different insert rings to install bearing races on the 1.5 and 1-1/4 forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-15 will work on forks with column length of 330mm or less.
Buy
Availability: In Stock
£53.99
cycling 252
Description Reviews / Comments Add New

Product Description

The CRS-15 uses two different insert rings to install bearing races on the 1.5 & 1-1/4 forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube & seat the race into its proper place safely & accurately. The CRS-15 will work on forks with column length of 330mm or less.

Reviews/Comments

Add New

Intelligent Comparison

Available
Park Tool CRS-1 Crown Race Setting System
Park Tool CRS-1 Crown Race Setting System Rutland Cycling
£62.99
Available
Park Tool CRC-15 Crown Race Cutter Adaptor
Park Tool CRC-15 Crown Race Cutter Adaptor Rutland Cycling
£199.99

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Inch - Equivalent to approximately 2.5cm
tap - A device used to control the release of gas or liquid.
Hammer - A tool used for providing impact to an object such as a nail
Install - A process of putting materials together to create a finished product.

Supplier Information

Rutland Cycling
Page Updated: 2021-08-13 03:14:02

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu