More From Contributor

Park Tool CN10C
- Pro Cable & Housing Cutter. The CN10C
- Pro Cable & Housing Cutter are a pair of finest top quality

...

Available

The CNW-2 makes chainring bolt set installation & removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts. ...

Available

Full stainless Steel tools in a forged aluminium case, the Park Tool Corkscrew Bottle Opener is perfect for the toolbox, workbench or wine bar. The BO-4 is a combination corkscrew & bottle opener complete with knife/ foil cutter. Made in the tradition of our premium quality fold up tools, it folds for storage & features all stainless-steel mechanisms housed in a forged aluminum case. This is a finest top quality beverage tool perfect for the workbench, toolbox or wine bar. ...

Available

Secure engagement, easy to use, & fast! The CP-1 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1 is 13.7 (35cm) long & can be used with one hand to hold cassettes solidly during lock ring removal. Forged steel construction with a spring loaded return & comfortable dual density grips. ...

Available

To ensure proper headset performance & longevity, special attention must be given to accurately machine the fork’s crown race seat. The CRC-1 is a professional quality machining tool for milling both the outer edge & lower surfaces of the crown race seat.

Includes:: high speed steel cutters & adjustable collets to machine 26.5mm & 27.1mm crown race seats on 1” forks & 30.1mm crown race seats on 1-1/8 forks. Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut & proper alignment of the fork in the frame.

...

Available

The CRP-2 is a precision tool for quickly & easily removing the headset crown race from the crown race seat of the fork. New for 2013, the tool is fully adjustable, allowing precise, independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions. ...

Available

The CRS-1 offers a six inserts with to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube & into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube & seat the race into its proper place safely & accurately. The CRS-1 set

Includes:: one universal setting tube, three 1 inserts, & three 1-1/8 inserts. The CRS-1 will work on forks of 340mm column length or less.

...

Available

The CRS-15 uses two different insert rings to install bearing races on the 1.5 & 1-1/4 forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube & seat the race into its proper place safely & accurately. The CRS-15 will work on forks with column length of 330mm or less. ...

Available

12 Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Fits Park Tool SAW-1 Hacksaw & most 12” hacksaws. The CSB-1 is designed for use with the SG-8 Saw Guide. NOTE: Similar to a grinding stone, do not use this blade on aluminium. ...

Available

After pressing the special connecting rivet into a Campagnolo 11-Speed Chain & breaking off the pilot, Campagnolo requires the end of the connecting rivet to be peened or deformed to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. Note: The CT-11 will not install or remove chain rivets. Its sole function is to peen & secure the end of the Campagnolo 11-speed connecting rivet. The Park Tool CT-4.2 Master Chain Tool (or previous model CT-4) is used for rivet installation & removal. ...

Available

Park Tool CRC-15 Crown Race Cutter Adaptor

Used in conjunction with the CRC-1 Crown Race Cutting Tool to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. Includes precision-machined adaptor body and 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5 taper of 4.25 inches.

Availability: In Stock
Supplier: Rutland Cycling
SKU: 303644

Description Reviews / Comments Add New

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Available

Park Tool CRC-1 Crown Race Cutting Tool Rutland Cycling

£399.99

Available

Park Tool CRS-15 1.5 Inch Crown Race Setter Rutland Cycling

£53.99

More From Contributor

Park Tool CRC-15 Crown Race Cutter Adaptor

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account