About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
B100 Braided Nylon
Chalk Line 100m
£7.81
For use with powdered chalk for marking between two points to give a straight line. Braided line resists fraying & is also useful for a plumb line as it does not spin round as a conventional twisted cord. Braided nylon has less stretch than other lines & is also the strongest. 100 metre spool. ...
Archived Product
image missing
B100 HSS Hand Reamer
Spiral Flute 10.00mm
£33.56
Hand reamers have a square on the end of the shank which allows placement into a wrench which the user rotates by h&. Used for opening out & finishing existing holes to H7 tolerance in most ferrous & non-ferrous metals. Flute Geometry
- 7° Helix Left hand spiral. To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear & will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.
...
Archived Product
image missing
B100 HSS Hand Reamer
Spiral Flute 12.00mm
£38.26
Hand reamers have a square on the end of the shank which allows placement into a wrench which the user rotates by h&. Used for opening out & finishing existing holes to H7 tolerance in most ferrous & non-ferrous metals. Flute Geometry
- 7° Helix Left hand spiral. To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear & will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.
...
Archived Product
image missing
B100 HSS Hand Reamer
Spiral Flute 4.00mm
£23.68
Hand reamers have a square on the end of the shank which allows placement into a wrench which the user rotates by h&. Used for opening out & finishing existing holes to H7 tolerance in most ferrous & non-ferrous metals. Flute Geometry
- 7° Helix Left hand spiral. To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear & will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.
...
Archived Product
image missing
B100 HSS Hand Reamer
Spiral Flute 5.00mm
£23.89
Hand reamers have a square on the end of the shank which allows placement into a wrench which the user rotates by h&. Used for opening out & finishing existing holes to H7 tolerance in most ferrous & non-ferrous metals. Flute Geometry
- 7° Helix Left hand spiral. To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear & will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.
...
Archived Product
image missing
B11 Bottle 59 Ml
Sunshine Yellow
£3.90
Wide range of colours
- Small bottle size ideal for small craft or hobby projects
- Available in the UK, Irel&, New Zealand

...
Archived Product
image missing
B1109 Replacement Rim
Cylinder Chrome Box
£7.66
The Yale 1109 series replacement rim cylinders are for use with surface mounted locks, such as nightlatches, operating from a tailbar. They are used to provides key access from one side of a door & are suitable for doors 38mm to 57mm in thickness. The tailbar can be cut to suit the thickness of the door. This Yale B1109CH Replacement Rim Cylinder comes in Polished Chrome Keyblank No.8 Supplied with two keys Rim Finish: Polished Chrome Pack: Boxed ...
Archived Product
image missing
B1109 Replacement Rim
Cylinder Polished
Brass Box
£6.98
The Yale 1109 series replacement rim cylinders are for use with surface mounted locks, such as nightlatches, operating from a tailbar. They are used to provides key access from one side of a door & are suitable for doors 38mm to 57mm in thickness. The tailbar can be cut to suit the thickness of the door. This Yale YALB1109PB Replacement Rim Cylinder comes in Polished Brass Keyblank No.8 Supplied with two keys Rim Finish: Polished Brass Pack: Boxed ...
Archived Product
B1109 Replacement Rim Cylinder Satin Chrome Brass Box
B1109 Replacement Rim
Cylinder Satin Chrome
Brass Box
£7.66
The Yale 1109 series replacement rim cylinders are for use with surface mounted locks, such as nightlatches, operating from a tailbar. They are used to provides key access from one side of a door & are suitable for doors 38mm to 57mm in thickness. The tailbar can be cut to suit the thickness of the door. This Yale P1109SC Replacement Rim Cylinder comes in Satin Chrome Supplied with two keys Rim Finish: Satin Chrome Keyblank No.8 Pack: Boxed ...
Archived Product
image missing
B12 Bottle 59 Ml
Buttercup Yellow
£3.27
Wide range of colours
- Small bottle size ideal for small craft or hobby projects
- Available in the UK, Irel&, New Zealand

...
Archived Product

B101 HSS Morse Taper Shank Machine Reamer 18.00mm

Dormer morse taper shank machine reamer - Spiral flute. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and non-ferrous metals. Flute Geometry - 7° Helix Left hand spiral. Bevel Lead - 45° a Side To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear and will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.
RIP - This product is no longer available on our network. It was last seen on 03.07.2013

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£56.08
toys Toys
Description Reviews / Comments Add New

Product Description

Dormer morse taper shank machine reamer
- Spiral flute. Used for opening out & finishing existing holes to H7 tolerance in most ferrous & non-ferrous metals. Flute Geometry
- 7° Helix Left hand spiral. Bevel Lead
- 45° a Side To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear & will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
Flute - A long silver instrument with buttons to press to make different notes.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Supplier Information

OneClickTools
Page Updated: 2012-12-03 20:01:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu