The PRO engine series feature aerospace-technology ball bearings for supporting the crankshaft at high RPM while the Schnuerle-boost combustion porting delivers greater power & fuel economy. The Pro Series engines are equipped with twin ball bearings, twin needles & ABN-type piston & cylinder for years of trouble-free performance. All Pro Series engines deliver exceptional power-to-weight ratio & value, making them fantastic 2-stroke power plants for model airplanes.

Features: Side exhaust ABN construction: Aluminium piston with Nickel-plated brass cylinder liner Hypereutectic machined Al-Si ringed piston High-strength connecting rod with bushings pre-installed One-piece crankcase with squared-off cooling fins Dual ball bearing-supported crankshaft Vertical fins heat sink head for optimum air cooling 3- Chamber muffler included 2 Needle valves carburettor Swept back needle valve for added safety adjustment State of the art CNC machined components Redline R2 glow plug included Specifications: Displacement: 7.47 cc. / 0.456 cu. in. Bore: 21.8 mm. / 0.858 in. Stroke: 20.0 mm. / 0.787 in. Crankshaft: UNF 1/4 / 28 Practical RPM: 2, 000 ~ 17, 000 Output: 1.43 BHP / 16, 000 RPM Weight: 455 g. w/muffler / 16.05 oz. Product Name/ Code:PRO-46 TT9141 Manufacturer: Thunder Tiger

...

The PRO engine series feature aerospace-technology ball bearings for supporting the crankshaft at high RPM while the Schnuerle-boost combustion porting delivers greater power & fuel economy. The Pro Series engines are equipped with twin ball bearings, twin needles & ABN-type piston & cylinder for years of trouble-free performance. All Pro Series engines deliver exceptional power-to-weight ratio & value, making them fantastic 2-stroke power plants for model airplanes.

Features: Side exhaust ABN construction: Aluminium piston with Nickel-plated brass cylinder liner Hypereutectic machined Al-Si ringed piston High-strength connecting rod with bushings pre-installed One-piece crankcase with squared-off cooling fins Dual ball bearing-supported crankshaft Vertical fins heat sink head for optimum air cooling 3- Chamber muffler included 2 Needle valves carburettor Swept back needle valve for added safety adjustment State of the art CNC machined components Redline R2 glow plug included Specifications: Displacement: 9.98 cc. / 0.609 cu. in. Bore: 23.5 mm. / 0.925 in. Stroke: 23.0 mm. / 0.906 in. Crankshaft: UNF 5/16 / 24 Practical RPM: 2, 000 ~ 16, 000 Output: 1.85 BHP / 15, 000 RPM Weight: 758 g. w/muffler / 26.75 oz. Product Name/ Code:PRO-61 TT9160 Manufacturer: Thunder Tiger

...

The PRO engine series feature aerospace-technology ball bearings for supporting the crankshaft at high RPM while the Schnuerle-boost combustion porting delivers greater power & fuel economy. The Pro Series engines are equipped with twin ball bearings, twin needles & ABN-type piston & cylinder for years of trouble-free performance. All Pro Series engines deliver exceptional power-to-weight ratio & value, making them fantastic 2-stroke power plants for model airplanes. The latest Pro-91 is a ringed-type engine equipped with a massive forged aluminum connecting rod & dual bushings. Its unique "squared" cylinder head design allows for cooler runs. Note that the pro-91 requires a muffler sold separately. (No. TT9225)
Features: Side exhaust ABN construction: Aluminium piston with Nickel-plated brass cylinder liner Hypereutectic machined Al-Si ringed piston High-strength connecting rod with bushings pre-installed One-piece crankcase with squared-off cooling fins Dual ball bearing-supported crankshaft Vertical fins heat sink head for optimum air cooling 2 Needle valves carburettor Swept back needle valve for added safety adjustment State of the art CNC machined components Redline R2 glow plug included Specifications: Displacement: 14.96 cc. / 0.913 cu. in. Bore: 28 mm. / 1.102 in. Stroke: 24.3 mm. / 0.957 in. Crankshaft: UNF 5/16 / 24 Practical RPM: 2, 000 ~ 16, 000 Output: 2.75 BHP / 15, 000 RPM Weight: 562 g. w/muffler / 19.83 oz. Product Name/ Code:PRO-91 TT9190 Manufacturer: Thunder Tiger
...

Produced in semi scale, this scale ABS model of the Cessna 177 is made using modern polymers & sophisticated moulding technologies. If you are looking for a durable sport scale plane then look no further.

Features: Semi scale sport plane ABS blow moulded fuselage Moulded main wing Comprehensive hardware pack Semi-symmetrical airfoil Specs: Wing Span: 1700mm Length: 1250mm Wing Area: 682sq.in Weight: 3000g Rec. Engine: PRO-61 Manufacturer: Thunder Tiger Model: TT4595

...

Since the introduction of the original Raptor 30 in 1998, many have been sold around the world. It has helped beginners master the art of RC helicopter flying. This model was designed & engineered by the World-renowned Mr. Shigetada Taya. It combines elements of his previously successful designs with today’s advanced technologies. This is truly a versatile model helicopter for everyone. The Thunder Tiger team of engineers & test pilots have collected feedback from around the world & have made the Raptor 30 an even better helicopter. New molds & tooling for parts & many other areas have subtle changes to increase strength & durability. All production parts use the most modern technology available to meet the standards as set forth by ISO-9001. In the last few years we have spend time & resource to develop a new Thunder Tiger PRO-39H (R) engine for the Raptor 30 v 2 & other 30 size helicopters. Available in ARF or kit form, the new Raptor 30 v 2 & the PRO-39H (R) engine will provide you with many hours of enjoyment. Product
Features: Heavy duty collective pitch arm Enlarged engine starting shaft from 5mm to 6mm Aerodynamic canopy for faster flights Metal alloy spring steel clutch with larger diameter Elevator control arm enhanced to eliminate flex Extended fan shroud increases cooling effectiveness, & strengthens the forward sideframe stiffness at the same time Main rotor blade spindle enlarged to 6mm provides solid hovering, responsive 3-D performance & consistent blade tracking Main rotor blade radial & thrust bearings enlarged from 5mm to 6mm for more precise blade pitch control Thicken the steel ball mounting area on the flybar paddle control arms by 0.5mm eliminates any flexing under extreme 3-D flying Tail rotor grips are the same as the 60 providing more solid control, & larger tail rotor diameter Vertical tail fin lengthened by 10mm to protect tail rotor blades during rough landings, & re-enforced with ribs Swashplate re-designed for longevity & minimal freeplay Fuel tank resigned for Raptor. 30 v 2 with 340cc capacity Tank reduces aircraft CG shift & carburetor sensitivity Rugged aluminum tail boom supports with plastic ends eliminate fatigue & cracking Larger volume 30-size muffler for increased power & low noise Re-designed & strengthened sideframes increase crash survivability, & reduce engine vibrations New frames use Raptor 60 style heavy duty double ball bearing for enginestarting shaft. Frames also include built-in molded clips for gyro wire Product Specifications: Full Length of fuselage: 1150mm (45.27") Full width of fuselage: 140mm (5.51") Total

Height: 400mm (15.75") Main rotor dia: 1245mm (49") Tail rotor dia: 260mm (10.25") Gear ratio: 1:9.56:4.57 Full equipped weight: 3000g (6.6 lbs)


...

If you are looking for a Nitro powered trainer that doesn’t look like the box it came in, then the Ready trainer is the one for you. Featuring a fully blow moulded wing & fuselage, the Ready trainer benefits from high wing stability & ease of construction. With a comprehensive hardware set & eye catching decals, the Ready trainer really is the best choice entry level trainer.
Features:ABS Blow moulded fuselage Moulded main wing Hardware & decals included Specs: Wing Span: 1570mm Length: 1200mm Wing Area: 605 sq.in Weight: 2800g Rec. Engine: GP42/PRO46 Manufacturer: Thunder Tiger Model: TT4591
...

Redline is a new engine product line of Thunder Tiger. High performance, extreme power will be the main features of this series engine. RL-53H (R) helicopter engine is the first engine in this series. With the biggest displacement & awesome power, RL-53H (R) is the best choice nitro power plant for your. 50 size heli model. Install the new RL-53H (R), you will get the extreme power you never experience before!!
Features: Biggest displacement with large power Fix type Carb. Installed thermal Isolator gasket construction Ringed piston with XC2 cylinder construction Push-Pull throttle lever Anodize Machinery Cylinder Head LU Type RR Ball Bearing Reinforce beam structure Specifications: Displacement (c.c. / cu.in.) 8.67 c.c / 0.529 cu.in Bore (mm / in.) 22.5 mm / 0.886 in Stroke (mm / in.) 21.8 mm / 0.858 in Practical R.P.M. (R.P.M.) 2, 000~21, 000 Output (BHP/RPM) 2.1 BHP / 17, 000 RPM Weight (g/oz) 380 g / 13.40 oz Product Name/ Code:RL-53H TT9606 Manufacturer: Thunder Tiger
...

CHINA TEAM, as the first syndicate ever to carry the Chinese Flag in the history of the America’s Cup. The boat of CHINA TEAM is called ‘ Longtze’, which means son of the dragon. In the 32nd America’s Cup, the Chinese dragon which is the only Asian racing yacht participate in this competition & reconnect with their ancient & prestigious maritime tradition. Product Specifications: Length: 39” (993mm) Beam: 6.75” (172mm) Mast

Height: 51.4” (1306mm) Overall

Height: 67” (1700mm) Overall Weight: 3.5 kg (7.7 lb.)
Features: Quality Factory Pre-painted Fiberglass Hull High Performance Plus “ Tear Resist” Racing Sails Light yet Rigid Extruded Aluminum Booms & Master Stabilized Low Drag Hydrodynamic Steel Ballast Black Anodized Aluminum Stand Included Officially Licensed by China Team Manufacturer: Thunder Tiger Model / Part No: Sailing Yacht Americas Cup Yacht (TT5546)




...

Impressive & dramatic details make the Odyssey II stand out as a painstakingly reproduced scale model. Beauty & grace are abundant in the confident lines of this fine vessel, from the sails & deck all the way down to the keel. You will be proud to take this beauty to the lake or display it at home or in the office. Key
Features: One-Peice blow molded hull & deck Scale fittings Aluminum mast Stand included Specifications: Length: 610mm Sail Area: 17.3dm 2 Overall Weight: 1.8kg Beam: 200mm Mast Height: 790mm Overall Height: 1050mm Manufacturer: Thunder Tiger Model / Part No: Sailing Yacht Odyssey II (TT5553)
...

THUNDER TIGER STATIC-DIVING SUBMARINEExperience the mysteries of the deep....... The NEPTUNE SB-1 is the first underwater RC model from Thunder Tiger. Equipped with high technology operating equipment in the inner hull tub, covered by the bright yellow outer hull, the SB-1 will let you enjoy the otherwise hidden wonders of the underwater world. Adopting a static diving system, operating the SB-1 is just like the real thing. The system is driven by a ballast tank with pump & motor unit. Start the pump to induct the water into the ballast tank. Control the amount of water in the ballast tank, the submarine can dive from the surface & stay underwater in static. Using the propulsion power unit & full elevator & rudder control, you can drive the submarine under water with ease. Equipped with an auto detect protection system, if the system detects low battery power, low transmisson signal or leakage, then the roll pump will auto start to flood the water out of the ballast tank & make the SB-1 float back to the surface. Install the optional digital camera & you can watch the amazing underwater scenes as well. Key
Features:ABS Hull 12V propulsion unit Dual static & dynamic diving system Ballast tank with roll pump & motor drive system Full elevator/rudder control Auto detect protection system Basic Specifications: Displacement: 7.7kg surface / 7.95kg submerged Overall length: 774mm Beam: 290mm Draft: 200mm Height: 285mm Motor: 12v Propeller: 40mm pitch:41mm Speed: 1.45knots surface / 1.08 knots submerged Operating diving depth: 5 M Max. Diving depth: 10M (mechanical limit) Manufacturer: Thunder Tiger Model / Part No: Submarine Neptune SB1
...