Since the introduction of the original Raptor 30 in 1998, many have been sold around the world. It has helped beginners master the art of RC helicopter flying. This model was designed & engineered by the World-renowned Mr. Shigetada Taya. It combines elements of his previously successful designs with today’s advanced technologies. This is truly a versatile model helicopter for everyone. The Thunder Tiger team of engineers & test pilots have collected feedback from around the world & have made the Raptor 30 an even better helicopter. New molds & tooling for parts & many other areas have subtle changes to increase strength & durability. All production parts use the most modern technology available to meet the standards as set forth by ISO-9001. In the last few years we have spend time & resource to develop a new Thunder Tiger PRO-39H (R) engine for the Raptor 30 v 2 & other 30 size helicopters. Available in ARF or kit form, the new Raptor 30 v 2 & the PRO-39H (R) engine will provide you with many hours of enjoyment. Product
Features: Heavy duty collective pitch arm Enlarged engine starting shaft from 5mm to 6mm Aerodynamic canopy for faster flights Metal alloy spring steel clutch with larger diameter Elevator control arm enhanced to eliminate flex Extended fan shroud increases cooling effectiveness, & strengthens the forward sideframe stiffness at the same time Main rotor blade spindle enlarged to 6mm provides solid hovering, responsive 3-D performance & consistent blade tracking Main rotor blade radial & thrust bearings enlarged from 5mm to 6mm for more precise blade pitch control Thicken the steel ball mounting area on the flybar paddle control arms by 0.5mm eliminates any flexing under extreme 3-D flying Tail rotor grips are the same as the 60 providing more solid control, & larger tail rotor diameter Vertical tail fin lengthened by 10mm to protect tail rotor blades during rough landings, & re-enforced with ribs Swashplate re-designed for longevity & minimal freeplay Fuel tank resigned for Raptor. 30 v 2 with 340cc capacity Tank reduces aircraft CG shift & carburetor sensitivity Rugged aluminum tail boom supports with plastic ends eliminate fatigue & cracking Larger volume 30-size muffler for increased power & low noise Re-designed & strengthened sideframes increase crash survivability, & reduce engine vibrations New frames use Raptor 60 style heavy duty double ball bearing for enginestarting shaft. Frames also include built-in molded clips for gyro wire Product Specifications: Full Length of fuselage: 1150mm (45.27") Full width of fuselage: 140mm (5.51") Total

Height: 400mm (15.75") Main rotor dia: 1245mm (49") Tail rotor dia: 260mm (10.25") Gear ratio: 1:9.56:4.57 Full equipped weight: 3000g (6.6 lbs)


...

The Raptor 50 Titan combines all the key features needed for Extreme 3D flight. Whatever the maneuver we are sure you will feel the performance that the Titan provides. This model was designed & engineered by the World-renowned Mr. Shigetada Taya. It combines elements of his previously successful designs with today’s advanced technologies. Combined with all the features of Raptor 50 V2, the new Raptor 50 Titan adds more new features—longer tail boom to fit 620mm blade, push-pull system for collective pitch control & elevator control, rear mounted tail rotor servo plate, harden main shaft & more. With all the new features included, the Raptor 50 Titan is the best power-to-weight ratio & accuracy control system of any 50 class helicopter in the market. For 3-D pilots, Raptor 50 Titan will make you enjoy executing crisp maneuvers like – Climbing Tic-Toc, Chaos, Death Spirals & any other radical maneuver that pilots can dream of. Beginners & advanced 3-D pilots will be impressed with this new Raptor, The Raptor 50 Titan. Product
Features: Longer tail boom Rear mount tail rotor servo plate Push-Pull collective pitch control system Push-Pull elevator control system Stainless steel flybar rod All stainless linkage rods Harden main shaft Body support post Heavy-duty clutch bell (larger size bearing) New decals Product Specifications: Full Length of fuselage: 1220mm (48.03") Full width of fuselage: 1400mm (5.51") Total

Height: 400mm (15.74") Main rotor dia: 1345mm (52.95") Tail rotor dia: 236mm (9.29") Gear ratio: (STD): 1:8.5:4.56 / (OP): 1:8.73:4.56 Full equipped weight: 3000g (6.6 lbs)


...

If you are looking for a Nitro powered trainer that doesn’t look like the box it came in, then the Ready trainer is the one for you. Featuring a fully blow moulded wing & fuselage, the Ready trainer benefits from high wing stability & ease of construction. With a comprehensive hardware set & eye catching decals, the Ready trainer really is the best choice entry level trainer.
Features:ABS Blow moulded fuselage Moulded main wing Hardware & decals included Specs: Wing Span: 1570mm Length: 1200mm Wing Area: 605 sq.in Weight: 2800g Rec. Engine: GP42/PRO46 Manufacturer: Thunder Tiger Model: TT4591
...

Redline is a new engine product line of Thunder Tiger. High performance, extreme power will be the main features of this series engine. RL-53H (R) helicopter engine is the first engine in this series. With the biggest displacement & awesome power, RL-53H (R) is the best choice nitro power plant for your. 50 size heli model. Install the new RL-53H (R), you will get the extreme power you never experience before!!
Features: Biggest displacement with large power Fix type Carb. Installed thermal Isolator gasket construction Ringed piston with XC2 cylinder construction Push-Pull throttle lever Anodize Machinery Cylinder Head LU Type RR Ball Bearing Reinforce beam structure Specifications: Displacement (c.c. / cu.in.) 8.67 c.c / 0.529 cu.in Bore (mm / in.) 22.5 mm / 0.886 in Stroke (mm / in.) 21.8 mm / 0.858 in Practical R.P.M. (R.P.M.) 2, 000~21, 000 Output (BHP/RPM) 2.1 BHP / 17, 000 RPM Weight (g/oz) 380 g / 13.40 oz Product Name/ Code:RL-53H TT9606 Manufacturer: Thunder Tiger
...

CHINA TEAM, as the first syndicate ever to carry the Chinese Flag in the history of the America’s Cup. The boat of CHINA TEAM is called ‘ Longtze’, which means son of the dragon. In the 32nd America’s Cup, the Chinese dragon which is the only Asian racing yacht participate in this competition & reconnect with their ancient & prestigious maritime tradition. Product Specifications: Length: 39” (993mm) Beam: 6.75” (172mm) Mast

Height: 51.4” (1306mm) Overall

Height: 67” (1700mm) Overall Weight: 3.5 kg (7.7 lb.)
Features: Quality Factory Pre-painted Fiberglass Hull High Performance Plus “ Tear Resist” Racing Sails Light yet Rigid Extruded Aluminum Booms & Master Stabilized Low Drag Hydrodynamic Steel Ballast Black Anodized Aluminum Stand Included Officially Licensed by China Team Manufacturer: Thunder Tiger Model / Part No: Sailing Yacht Americas Cup Yacht (TT5546)




...

THUNDER TIGER STATIC-DIVING SUBMARINEExperience the mysteries of the deep....... The NEPTUNE SB-1 is the first underwater RC model from Thunder Tiger. Equipped with high technology operating equipment in the inner hull tub, covered by the bright yellow outer hull, the SB-1 will let you enjoy the otherwise hidden wonders of the underwater world. Adopting a static diving system, operating the SB-1 is just like the real thing. The system is driven by a ballast tank with pump & motor unit. Start the pump to induct the water into the ballast tank. Control the amount of water in the ballast tank, the submarine can dive from the surface & stay underwater in static. Using the propulsion power unit & full elevator & rudder control, you can drive the submarine under water with ease. Equipped with an auto detect protection system, if the system detects low battery power, low transmisson signal or leakage, then the roll pump will auto start to flood the water out of the ballast tank & make the SB-1 float back to the surface. Install the optional digital camera & you can watch the amazing underwater scenes as well. Key
Features:ABS Hull 12V propulsion unit Dual static & dynamic diving system Ballast tank with roll pump & motor drive system Full elevator/rudder control Auto detect protection system Basic Specifications: Displacement: 7.7kg surface / 7.95kg submerged Overall length: 774mm Beam: 290mm Draft: 200mm Height: 285mm Motor: 12v Propeller: 40mm pitch:41mm Speed: 1.45knots surface / 1.08 knots submerged Operating diving depth: 5 M Max. Diving depth: 10M (mechanical limit) Manufacturer: Thunder Tiger Model / Part No: Submarine Neptune SB1
...

Recommended Age: 14+CHINA TEAM, as the first syndicate ever to carry the Chinese Flag in the history of the Americas Cup. The boat of CHINA TEAM is called Longtze, which means son of the dragon. In the 32nd America’s Cup, the Chinese dragon which is the only Asian racing yacht participate in this competition & reconnect with their ancient & prestigious maritime tradition. Requires: Assembley Radio Equipment
Features: Quality Factory Pre-painted Fibreglass Hull High Performance Plus “ Tear Resist” Racing Sails Light yet Rigid Extruded Aluminium Booms & Master Stabilized Low Drag Hydrodynamic Steel Ballast Black Anodized Aluminium Stand Included Officially Licensed by China Team Product Specification Length 993mm Beam 172mm Mast Height 306mm Overall Height 1700mm Overall Weight 7.7lb. Manufacturer:THUNDER TIGERModel: TEAM CHINA 1M Racing Yacht (TT5564)
...

The new Thunder Tiger Tomahawk BX 1:10 scale off-road buggy, equipped with it's powerful PRO-18BX pull start engine. The PRO-18BX's 3.0cc will have you clearing jumps & gaps on the track or at your local field. The buggy's optimum weight distribution & ultra wide stance enables the driver full control during the off-road experience. With two differential sets installed & 4WD shaft driven design, the buggy is basically a down scaled 1:8 scale buggy. Many optional parts available to customize your buggy in your individual way. Fully factory assembled chassis with complete ACE RC COUGAR PS3 3CH 2.4 G Hz R/C system installed. Thunder Tiger PRO-18BX (3.0 cc) engine mounted. Pre-cut body with complete printing & decals applied. Batteries not included. Features Preinstalled radio gears in sealed RX box Maximum 3 gear differentials upgradeable (Center diff for option)4WD shaft driven off-road buggy 4 oil-filled coilover shock absorbers Thick 3.0mm anodized countersunk chassis Heavy duty fiberglass disc brake Front & rear universal (CVA) Durable & powerful Pro-18BX (3.0cc) engine w/recoil pull start Aluminum tuned pipe & manifold Full ball bearings on all axles Ultra long racing suspension arms 75cc large capacity fuel tank Pre-printed & trimmed body Wide Varity of Option Parts are separately available.NITRO KITS REQUIRE: Rechargeable Glow Plug Starter & charger Nitro Fuel 12 AA Batteries Manufacturer: Thunder Tiger Model: TT6195F72 Tomahawk BX Yellow 2.4GHZScale: 1/10 ...

Thunder Tiger Tomahawk MX Audi TT (TT6169F76) Introduction: Tomahawk series was designed for those not wanting to yield to barriers placed on speed & performance. This totally new design captures a whole new set of design features only found in the Tomahawk series. The TT 3.0cc racing engine comes ready to burn up the road at exhilarating speeds. Combine the power of the fire breathing 3.0cc engine & a flex free 3.0mm anodized chassis & you have yourself a Tomahawk ready to launch out of turns or leap ahead during those long straight-aways. The silky smooth shaft drive train harness the power & unleash it with the ground hugging fireblade tires. Ultra smooth oil filled shocks deliver on rough terrain or coming out of hairpin turns. Tomahawk has the ability to adapt providing tune-able caster, toe & anti-squat. Ready to cruise at missile speeds, just squeeze for speed. Differences between the Tomahawk MX & the Tomahawk VX 
1. Center spur gear instead of 2-speed transmission 
2. Nylon molded toe blocks instead of aluminum toe blocks 
3. Different style of tuned pipes

Features: 1. Fully assembled shaft driven 4WD chassis 2. Double-wishbone front & rear suspension 
3. Fully ballraced drive train 
4. Covered RX box for electronics protection 
5. Heavy duty oil-filled shocks 
6. Thick 3.0mm anodized aluminum alloy chassis 
7. Fully adjustable racing suspension geometry 
8. Durable & powerful Pro-18BX (3.0 cc) engine 
9. Reinforced center spur gear, 2 speed transmission upgradeable 10. Reinforced one-piece resin steering turnbuckles. 
11. Versatile modular design for ease of maintenance & modification 
12. Race ready slick tires 
13. Fully upgradable Official Licensed R/C Car Body Specification: Wheelbase: 10.43” (265mm) Weight: 3.63 lbs. (1650g approx.) Length: 17.00” (432mm)
Width: 7.87” (200mm)
Height: 4.33” (110mm) Engine: PRO-18BXScale: 1:10 MANUFACTURER: THUNDER TIGER PRODUCT CODE: TT6169F76



...

Thunder Tiger Tomahawk MX BMW M6 (TT6169F74) Introduction: Tomahawk series was designed for those not wanting to yield to barriers placed on speed & performance. This totally new design captures a whole new set of design features only found in the Tomahawk series. The TT 3.0cc racing engine comes ready to burn up the road at exhilarating speeds. Combine the power of the fire breathing 3.0cc engine & a flex free 3.0mm anodized chassis & you have yourself a Tomahawk ready to launch out of turns or leap ahead during those long straight-aways. The silky smooth shaft drive train harness the power & unleash it with the ground hugging fireblade tires. Ultra smooth oil filled shocks deliver on rough terrain or coming out of hairpin turns. Tomahawk has the ability to adapt providing tune-able caster, toe & anti-squat. Ready to cruise at missile speeds, just squeeze for speed. Differences between the Tomahawk MX & the Tomahawk VX 
1. Center spur gear instead of 2-speed transmission 
2. Nylon molded toe blocks instead of aluminum toe blocks 
3. Different style of tuned pipes

Features: 1. Fully assembled shaft driven 4WD chassis 2. Double-wishbone front & rear suspension 
3. Fully ballraced drive train 
4. Covered RX box for electronics protection 
5. Heavy duty oil-filled shocks 
6. Thick 3.0mm anodized aluminum alloy chassis 
7. Fully adjustable racing suspension geometry 
8. Durable & powerful Pro-18BX (3.0 cc) engine 
9. Reinforced center spur gear, 2 speed transmission upgradeable 10. Reinforced one-piece resin steering turnbuckles. 
11. Versatile modular design for ease of maintenance & modification 
12. Race ready slick tires 
13. Fully upgradable Official Licensed R/C Car Body Specification: Wheelbase: 10.43” (265mm) Weight: 3.63 lbs. (1650g approx.) Length: 17.00” (432mm)
Width: 7.87” (200mm)
Height: 4.33” (110mm) Engine: PRO-18BXScale: 1:10 MANUFACTURER: THUNDER TIGER PRODUCT CODE: TT6169F74



...