Level: Beginner Manufacturer: Billing Boats Model Number: BB603 Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! The Norden is a typical coaster of the kind which was earlier very commonly used along the Western coast of Denmark. This type of boat was originally designed by local boat builders in the villages of Klitmøller & Vorupør around 1930. It represented an improvement of the existing boats & has remained unchanged, except that the ship now is a few feet longer & has a closed wheel house. Specification: Height
- 28 Length
- 34.5 Width
- 11.5 Laser Cut Parts Static model not suitable for R/C.


...

Level: Experienced Manufacturer: Billing Boats Model Number: BB476 This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way!A typical trawler from the North Sea, built in 1970 at an English shipyard. The model kit is based on the original ship drawings. Specification: Height
- 43 Length – 81 Width – 19 Laser Cut Parts Scale: 1:50 Model suitable for R/C.
...

The well-trained model builder will find many challenges
- & many hours of intensive occupation
- with these large & impressive

...

Level: Advanced Beginner Model number: BB605 Manufacturer: Billing Boats Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. The St. Roch was built at the Burrard Dry Dock in North Vancouver in 1928, intended for sailing in Arctic waters. It was the first ship to sail through the North-West Passage from the Pacific to the Atlantic. In the summer of 1944 the St. Roch sailed from Halifax to Vancouver, thereby becoming the first ship to complete the journey in both directions. Specification: Height – 32.5 Length – 47 Width – 11 Laser Cut Parts Scale: 1/72nd Static model not suitable for R/C. ...

Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! This shrimp cutter is a typical cutter from the 1960’s used for catching shrimp off the German, Dutch & Danish coasts. The equipment on board

Includes:: the necessary shrimp sieves & cookers for immediate preparation of the catch. Specifications: Height – 23.6 Length – 36.3 Width – 10.7 Plastic Hull 1/40th Scale Manufacturer: Billing Boats Model: BB201

...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. A Classic American runabout from the mid-1920s. This type of boat was mainly used as racingboats, but in some cases also as tenders, for those who had a lager yacht. Racingboats from that time was build in beautiful classic materials such as teak & mahogany. If you had a 100-150 hp engine back then, you had one of the most powerful engines. The model is based on a fast 34 foot tender. Specifications: Height
- 15 Length
- 69 Width
- 15 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB710


...

Level: Advanced Beginner Model Number: BB706 Manufacturer: Billing Boats Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you Three Mastet Topsail Schooner ’SIR WINSTON CHURCHILL’ The Schooner was built in 1965 at the Richard Dunston Ltd., Shipyard in Hessle, Yorkshire, GB, for the " Sail Training Association" in Bosham. The constructors of this ship were Chamber & Nicholsen Ltd. The ’ Sir Winston Churchill’ is also equiped with a 240 HP help-engine & has a total sailarea of 817 sqm. The main-crew consists of 11 men, of these are 8 officers, & they can carry up to 44 ship-boys. In October 1967 a sistership, the ’ Malcom Miller’ was taken into service, & was immediately in the media as its crew-menbers consisted of women. One of these ships can almost be found at every Windjammer Parade. Specification: Height
- 51.5 Length
- 63.5 Width
- 11 Laser Cut Parts Static model not suitable for R/C.


...

This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! When three men met in early 1949 at a Seattle sailboat shop, none of them could have foreseen the peculiar & far-reaching consequences of their joint venture to build a better race boat. Slo-mo-shun IV was indeed better than any previous race boat. But she was more than that: Slo-mo IV touched the hearts of thousands who cheered her on & changed forever the way generations of Seattleites feel about the first week in August. Slo-mo IV transformed the lives of those most closely associated with her, nearly destroying some of them. She evoked thrills & anger &, ultimately, she prompted tears & inspired poetry. Specifications: Height
- 21.5 Length
- 75 Width
- 31 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB520


...

Level: Experienced Model Number: BB528 C Manufacturer: Billing Boats This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! The Smit Nederland was built in 1979 at the BV Scheepswerft & Machinefebriek " De Merwede" in Hardinzveld, Holl&. Length 28.40 m, breadth 8, 85 m, draught 3.85 m. The vessel is driven by two " Stork Werkspoor" diesel engines, whose 1000 rpm yield 1800 HP. Top speed is 12 knots; the acting radius is 2, 250 miles. A special detail of this ship is the propellors, which are equipped with reversible blades in jet streams, & two basin rudders which ensure good manoeuvrability. Specification: Height
- 52 Length – 87 Width – 27 Laser Cut Parts Scale: 1:33 ABS Hull Model suitable for R/C.
...

Level: Experienced Model Number: B478 C Manufacturer: Billing Boats This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! Smit Rotterdam was built in 1975 for Smit International BV in Holl&, & was at the time of its completion the largest & most powerful tugboat in the world
- with a tonnage of 2, 273 tons, a length of 75 m, a 22, 000 HP engine & a top speed of 16.5 knots. The ship is built with bulb stern & stern nozzle; inboard equipment

Includes:: the most modern gear for navigation, steering & radio communication. Specification: Height
- 50 Length
- 90 Width
- 20 Laser Cut Parts Scale 1:75 Model suitable for R/C.





...