Level: Experienced Model number: BB801 Manufacturer: Billing Boats This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way!A three-masted galleon launched in 1615. Length 19.50 m, breadth 7.95 m, draught 3.35 m & a displacement of 180 tons. The first information about the Mayflower dates from 6th September 1620. After a number of difficulties, the vessel sailed from Plymouth in England with 102 men, women & children on board. After 67 days at sea, the Mayflower cast anchor at the port later to be called Provincetown
- almost 200 miles further north than planned. Mayflower II was built in l 957 in Brixham, Devon & sailed to the USA, where it is now permanently anchored as a gift to the American nation. Specification: Height
- 52 Length
- 65 Width
- 13.5 Laser Cut Parts Static model not suitable for R/C.



...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. Even though this boat is known as a “ Monterey, ” the design of this craft originated in San Francisco Bay, California, (90 miles from Monterey). This boat was built at Fisherman’s Wharf in San Francisco & was given the nickname “ Monterey”. The immigrant Italian or Sicilian craftsman in San Francisco Bay, patterned the “ Monterey” after the Mediterranean Lateen Sail Felucca, with modifications to accept a gas engine, so this is a true California, USA creation! These boats were “built by eye, ” no plans used, the craftsmen simply started with a general double ended design, with an ample beam, clipper bow, & built the remainder by eye. So, “ All “ Montereys” are alike, but no two are the same.” This 1928 version owned by Angelo Ghio, has all the characteristics of a true “ Monterey, ” as he chose the style of house; stem curvature etc. that he preferred. Several thousand of these boats were built from 1910 to 1950, they proved to be very sturdy (cedar planking) & reliable with much beauty for a work boat! A few are still in use, the “ Monterey” boat is in its 77th year, (its 9th owner). Specifications: Height
- 14.5 Length
- 49 Width
- 12.5 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB522


...

Level: Beginner Manufacturer: Billing Boats Model Number: BB603 Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! The Norden is a typical coaster of the kind which was earlier very commonly used along the Western coast of Denmark. This type of boat was originally designed by local boat builders in the villages of Klitmøller & Vorupør around 1930. It represented an improvement of the existing boats & has remained unchanged, except that the ship now is a few feet longer & has a closed wheel house. Specification: Height
- 28 Length
- 34.5 Width
- 11.5 Laser Cut Parts Static model not suitable for R/C.


...

Level: Experienced Manufacturer: Billing Boats Model Number: BB476 This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way!A typical trawler from the North Sea, built in 1970 at an English shipyard. The model kit is based on the original ship drawings. Specification: Height
- 43 Length – 81 Width – 19 Laser Cut Parts Scale: 1:50 Model suitable for R/C.
...

The well-trained model builder will find many challenges
- & many hours of intensive occupation
- with these large & impressive

...

Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! This shrimp cutter is a typical cutter from the 1960’s used for catching shrimp off the German, Dutch & Danish coasts. The equipment on board

Includes:: the necessary shrimp sieves & cookers for immediate preparation of the catch. Specifications: Height – 23.6 Length – 36.3 Width – 10.7 Plastic Hull 1/40th Scale Manufacturer: Billing Boats Model: BB201

...

Manufaturer: Billing Boats Model Number: BB101 Level: Beginner Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! Built at the Coast Guard shipyard in Curtis Bay, Maryl&, USA. After minor adjustments the vessel is now doing duty in British coastal waters for the Royal National Lifeboat Institution. This former 44-foot Coast Guard is a very seaworthy lifeboat, designed to carry out search & rescue assignments in poor weather & water conditions. With a skilled & experienced crew, this vessel can carry out the most demanding of rescue operations. Specification: Height – 23.6 Length – 36.3 Width – 10.7 Plastic Hull Scale: 1:10 Static model not suitable for R/C. ...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. A Classic American runabout from the mid-1920s. This type of boat was mainly used as racingboats, but in some cases also as tenders, for those who had a lager yacht. Racingboats from that time was build in beautiful classic materials such as teak & mahogany. If you had a 100-150 hp engine back then, you had one of the most powerful engines. The model is based on a fast 34 foot tender. Specifications: Height
- 15 Length
- 69 Width
- 15 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB710


...

Level: Advanced Beginner Model Number: BB706 Manufacturer: Billing Boats Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you Three Mastet Topsail Schooner ’SIR WINSTON CHURCHILL’ The Schooner was built in 1965 at the Richard Dunston Ltd., Shipyard in Hessle, Yorkshire, GB, for the " Sail Training Association" in Bosham. The constructors of this ship were Chamber & Nicholsen Ltd. The ’ Sir Winston Churchill’ is also equiped with a 240 HP help-engine & has a total sailarea of 817 sqm. The main-crew consists of 11 men, of these are 8 officers, & they can carry up to 44 ship-boys. In October 1967 a sistership, the ’ Malcom Miller’ was taken into service, & was immediately in the media as its crew-menbers consisted of women. One of these ships can almost be found at every Windjammer Parade. Specification: Height
- 51.5 Length
- 63.5 Width
- 11 Laser Cut Parts Static model not suitable for R/C.


...

This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! When three men met in early 1949 at a Seattle sailboat shop, none of them could have foreseen the peculiar & far-reaching consequences of their joint venture to build a better race boat. Slo-mo-shun IV was indeed better than any previous race boat. But she was more than that: Slo-mo IV touched the hearts of thousands who cheered her on & changed forever the way generations of Seattleites feel about the first week in August. Slo-mo IV transformed the lives of those most closely associated with her, nearly destroying some of them. She evoked thrills & anger &, ultimately, she prompted tears & inspired poetry. Specifications: Height
- 21.5 Length
- 75 Width
- 31 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB520


...