Level: Beginner Model Number: BB604 Manufacturer: Billing Boats Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! This ship is a 50-foot steam pinnace from around the middle of the 19th Century. These boats had a small forecastle, a room for the crew, a boiler room & a cabin. Above the crews’ quarters was a conical steel base with a permanent universal ring, on which a 3-lb quick-firing cannon or maxim machine gun could be mounted. Specification: Height
- 14 Length
- 45 Width
- 9.5 Laser Cut Parts Static model Not Suitable for R/C.


...

Billing Boats HMS Victory (Limited Edition) The Billing Boats HMS Victory is a Classic model boat recreation. HMS Victory was launched in 1765 at Chatham Dockyard & was commissioned in 1778. She continued in active service for the next 34 years which included her most famous moment “the Battle of Trafalgar” in 1805. In 1812 the HMS Victory was retired from frontline duty & anchored in Portsmouth Harbour, on the south coast of Engl&. For the next 110 years the Victory remained at her moorings in Portsmouth Harbour fulfilling a combination of practical & ceremonial roles. In 1922, amid fears for her continued survival, the Victory was moved into Portsmouth’s Royal Naval Dockyard & placed in No 2 Dry Dock. Her Majesty’s Ship Victory is the only surviving naval warship that represents the skill of naval dockyard shipwrights, ship designers & the industrial ability of Britain during the mid 18th century. Billing Boats HMS Victory Specifications: Double Planked do-it-yourself Lasercut Wooden Boatkit Scale 1:75
- Length 134 cm (52.75 inches) Parts in wood & brass Full step by step instruction & plans Manufacturer: Billing Boats Model: HMS Victory Part No: BB498
...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. The Cux 87 is a typical German trawler from the Deutsche Krabbenkutter Werft. This type of boat is often seen in the small harbours along the North German coast. Specifications: Height – 43 Length – 55 Width – 16 Laser Cut 1/33rd Scale Manufacturer: Billing Boats Model: BB474 ...

This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! Lilla Dan was built in 1951 at the well-known shipyard in Svendborg, Denmark, by J. Ring Andersen, & constructed mainly of oak & beach. Lilla Dan is owned by the shipping company Lauritzen in Copenhagen & does duty today both as a training ship & for chartered tours. Specifications: Height
- 49 Length – 68 Width – 12 Laser Cut Parts 1/50th Scale Manufacturer: Billing Boats Model: BB578
...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. Built as the 19th Century was drawing to a close. This is a "dundee" of 50-60 tons & equipped with many sails, making necessary a ballast of 20-25 tons & a 12-man crew. Tuna fishing requires robust, seaworthy & relatively fastsailing vessels. Specifications: Height
- 50 Length
- 57 Width
- 13 Laser Cut Parts Not suitable for RC Manufacturer: Billing Boats Model: BB580


...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. Even though this boat is known as a “ Monterey, ” the design of this craft originated in San Francisco Bay, California, (90 miles from Monterey). This boat was built at Fisherman’s Wharf in San Francisco & was given the nickname “ Monterey”. The immigrant Italian or Sicilian craftsman in San Francisco Bay, patterned the “ Monterey” after the Mediterranean Lateen Sail Felucca, with modifications to accept a gas engine, so this is a true California, USA creation! These boats were “built by eye, ” no plans used, the craftsmen simply started with a general double ended design, with an ample beam, clipper bow, & built the remainder by eye. So, “ All “ Montereys” are alike, but no two are the same.” This 1928 version owned by Angelo Ghio, has all the characteristics of a true “ Monterey, ” as he chose the style of house; stem curvature etc. that he preferred. Several thousand of these boats were built from 1910 to 1950, they proved to be very sturdy (cedar planking) & reliable with much beauty for a work boat! A few are still in use, the “ Monterey” boat is in its 77th year, (its 9th owner). Specifications: Height
- 14.5 Length
- 49 Width
- 12.5 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB522


...

Level: Beginner Manufacturer: Billing Boats Model Number: BB603 Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! The Norden is a typical coaster of the kind which was earlier very commonly used along the Western coast of Denmark. This type of boat was originally designed by local boat builders in the villages of Klitmøller & Vorupør around 1930. It represented an improvement of the existing boats & has remained unchanged, except that the ship now is a few feet longer & has a closed wheel house. Specification: Height
- 28 Length
- 34.5 Width
- 11.5 Laser Cut Parts Static model not suitable for R/C.


...

Level: Experienced Manufacturer: Billing Boats Model Number: BB476 This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way!A typical trawler from the North Sea, built in 1970 at an English shipyard. The model kit is based on the original ship drawings. Specification: Height
- 43 Length – 81 Width – 19 Laser Cut Parts Scale: 1:50 Model suitable for R/C.
...

The well-trained model builder will find many challenges
- & many hours of intensive occupation
- with these large & impressive

...

Level: Advanced Beginner Model number: BB605 Manufacturer: Billing Boats Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. The St. Roch was built at the Burrard Dry Dock in North Vancouver in 1928, intended for sailing in Arctic waters. It was the first ship to sail through the North-West Passage from the Pacific to the Atlantic. In the summer of 1944 the St. Roch sailed from Halifax to Vancouver, thereby becoming the first ship to complete the journey in both directions. Specification: Height – 32.5 Length – 47 Width – 11 Laser Cut Parts Scale: 1/72nd Static model not suitable for R/C. ...