Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! This shrimp cutter is a typical cutter from the 1960’s used for catching shrimp off the German, Dutch & Danish coasts. The equipment on board

Includes:: the necessary shrimp sieves & cookers for immediate preparation of the catch. Specifications: Height – 23.6 Length – 36.3 Width – 10.7 Plastic Hull 1/40th Scale Manufacturer: Billing Boats Model: BB201

...

Manufaturer: Billing Boats Model Number: BB101 Level: Beginner Choose this level if you have never tried model building before. These models all have a simple construction. But remember: Even the easiest model takes more than one evening to build! Built at the Coast Guard shipyard in Curtis Bay, Maryl&, USA. After minor adjustments the vessel is now doing duty in British coastal waters for the Royal National Lifeboat Institution. This former 44-foot Coast Guard is a very seaworthy lifeboat, designed to carry out search & rescue assignments in poor weather & water conditions. With a skilled & experienced crew, this vessel can carry out the most demanding of rescue operations. Specification: Height – 23.6 Length – 36.3 Width – 10.7 Plastic Hull Scale: 1:10 Static model not suitable for R/C. ...

Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. A Classic American runabout from the mid-1920s. This type of boat was mainly used as racingboats, but in some cases also as tenders, for those who had a lager yacht. Racingboats from that time was build in beautiful classic materials such as teak & mahogany. If you had a 100-150 hp engine back then, you had one of the most powerful engines. The model is based on a fast 34 foot tender. Specifications: Height
- 15 Length
- 69 Width
- 15 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB710


...

Level: Advanced Beginner Model Number: BB706 Manufacturer: Billing Boats Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you Three Mastet Topsail Schooner ’SIR WINSTON CHURCHILL’ The Schooner was built in 1965 at the Richard Dunston Ltd., Shipyard in Hessle, Yorkshire, GB, for the " Sail Training Association" in Bosham. The constructors of this ship were Chamber & Nicholsen Ltd. The ’ Sir Winston Churchill’ is also equiped with a 240 HP help-engine & has a total sailarea of 817 sqm. The main-crew consists of 11 men, of these are 8 officers, & they can carry up to 44 ship-boys. In October 1967 a sistership, the ’ Malcom Miller’ was taken into service, & was immediately in the media as its crew-menbers consisted of women. One of these ships can almost be found at every Windjammer Parade. Specification: Height
- 51.5 Length
- 63.5 Width
- 11 Laser Cut Parts Static model not suitable for R/C.


...

This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! When three men met in early 1949 at a Seattle sailboat shop, none of them could have foreseen the peculiar & far-reaching consequences of their joint venture to build a better race boat. Slo-mo-shun IV was indeed better than any previous race boat. But she was more than that: Slo-mo IV touched the hearts of thousands who cheered her on & changed forever the way generations of Seattleites feel about the first week in August. Slo-mo IV transformed the lives of those most closely associated with her, nearly destroying some of them. She evoked thrills & anger &, ultimately, she prompted tears & inspired poetry. Specifications: Height
- 21.5 Length
- 75 Width
- 31 Laser Cut Parts Suitable for RC Manufacturer: Billing Boats Model: BB520


...

Level: Experienced Model Number: B478 C Manufacturer: Billing Boats This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! Smit Rotterdam was built in 1975 for Smit International BV in Holl&, & was at the time of its completion the largest & most powerful tugboat in the world
- with a tonnage of 2, 273 tons, a length of 75 m, a 22, 000 HP engine & a top speed of 16.5 knots. The ship is built with bulb stern & stern nozzle; inboard equipment

Includes:: the most modern gear for navigation, steering & radio communication. Specification: Height
- 50 Length
- 90 Width
- 20 Laser Cut Parts Scale 1:75 Model suitable for R/C.





...

Level: Advanced Beginner Model Number: BB700 Manufacturer: Billing Boats Once you’ve built a few models, you’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. Built in l 93l at the Frederikshavn Shipyard in Denmark, St. Canute sailed for many years as a tugboat & icebreaker in the Odense harbour under its original name St. Knud. St. Canute is 28 m long, 7.6 m broad, draws 3.80 m. Specification: Height
- 42 Length
- 56 Width – 15.5 Laser Cut Parts Scale: 1:50 Model Suitable for R/C.

...

A typical English cod fishing trawler from the 1950’s to the 1970’s sailing along the east coast of England from Ipswich to North Sunderland & Northumberland just below the Scottish border. The boats where equipped with a 150 HK Diesel Engine. The boats where hauled up on shore via a line fastened to the bow. The crew on these vessels where between 3-5 men. Manufacturer: Billing Boats Model: BB524 ...

Level: Experienced Model number: BB586 Manufacturer: Billing boats This level is for those who have tried to build a model ship before, or perhaps one of plastic. These models also have a simple construction, though you will meet a number of ’challenges’ on the way! This 44-foot Coast Guard is a very seaworthy lifeboat, designed to carry out search & rescue assignments in poor weather & water conditions. With a skilled & experienced crew, this vessel can carry out the most demanding of rescue operations. The vessel is self stabilizing. Built in 1961 at the Coast Guard shipyard in Curtis Bay, Maryl&, USA. Specification: Height
- 47 Length – 73 Width – 22 Laser Cut Parts Scale: 1:20ABS Hull Model suitable for R/C.
...

The well-trained model builder will find many challenges
- & many hours of intensive occupation
- with these large & impressive

...