Female V Figure from Cyberpunk 2077 - Darkhorse Deluxe 36722 Female V Figure from Cyberpunk 2077. It is made by Darkhorse Deluxe and is approx. 21cm / 8.3in tall.
F1 Steering Wheel Advanced Version Keychain AUTOart This F1 Steering Wheel Advanced Version Keychain. It is made by AUTOart and is approx. 4cm / 1.6in wide.
Facehugger Lifesize Foam Replica from Alien - NECA 51355 Facehugger Lifesize Foam Replica from Alien. It is made by NECA and is 1:1 scale (approx. 101cm / 39.8in long).
Facel Vega Excellence 1958 1:43 scale Ex Mag Diecast Model Car This Facel Vega Excellence (1958) diecast model car is sahara grey and features working wheels. It is made by Ex Mag and is 1:43 scale (approx. 11cm / 4.3in long). This model also comes in its own display case to keep it in perfect dust free condition.
This Facel Vega Excellence (1960) Diecast Model Car is Black and features working wheels. It is made by Triple 9 and is 1:43 scale (approx. 11cm / 4.3in long).
Facel Vega Excellence 1960 1:43 scale Ex Mag Diecast Model Car This Facel Vega Excellence (1960) diecast model car is blue and features working wheels. It is made by Ex Mag and is 1:43 scale (approx. 9cm / 3.5in long). This model also comes in its own display case to keep it in perfect dust free condition.
This Facel Vega Excellence Si (1963) Resin Model Car is Burgundy and features comes in a display case. It is made by Neo and is 1:43 scale (approx. 10cm / 3.9in long).
Ex Mag 1:43 Facel Vega FV Diecast Model Car HA23 This model comes on a plastic base with vehicle name and includes an acrylic cover. Features red interior and yellow tinted headlights.
Fairchild Republic A-10C Thunderbolt II USAF 23rd Fighter Wing Flying Tigers 2014 1:100 scale Ex Mag Diecast Model Airplane This Fairchild Republic A-10C Thunderbolt II USAF 23rd Fighter Wing (Flying Tigers 2014) diecast model airplane is grey. It is made by Ex Mag and is 1:100 scale (approx. 16cm / 6.3in long).
Fairchild-Republic A-10 Thunderbolt II (74 TFS 23 TFW Louisiana 1989) (1:72 scale) - Designed especially for close air support missions and with the ability to combine large military loads, long loiter and wide combat radius, the A-10 proved to be vital assets to America and its allies during Operation Desert Storm.
In the Gulf War, A-10s, with a mission capable rate of 95.7 percent, flew 8, 100 sorties and launched 90 percent of the AGM-65 Maverick missiles. A-10s were seldom grounded due to maintenance problems or conditions unsuitable for flying during Operation Desert Storm. No other aircraft could carry as much ordnance over a target for so long, doling out and taking as much punishment, and return to an unimproved field to turn around quickly and strike at an enemy again.
This model depicts an aircraft of 74th Tactical Fighter Sqn., 23rd Tactical Fighter Wing, USAF.
Fairchild-Republic A-10 Thunderbolt II (81 FS 52FW Germany 2006) (1:72 scale) - According the Iraqi POWs, the single most recognizable and feared aircraft at low altitude was the Thunderbolt II. Seen conducting bombing raids three or four times a day, the A-10 was a seemingly ubiquitous threat. Although the actual bomb run was terrifying, the aircraft loitering around the target prior to target acquisition caused as much, if not more, anxiety since the Iraqi soldiers were unsure of the chosen target.
Fairchild-Republic A-10 Thunderbolt II (USAF Jaws) (1:72 scale) - In 1977, the military mirrored the popular film JAWS as its acronym and name for its tactical tests of the A-10 and Army attack helicopters became the ‘Joint Attack Weapons System’ (JAWS).
Air Force Aggressor pilots reported that the A-10"s light celestial camouflage scheme made the ‘Warthog’ easily visible from above, so the 57th Tactical Training Wing developed a new terrestrial camouflage of tan, green, or grey, sprayed and brushed with other earth tones. Two of the camouflages were evaluated at JAWS II in November 1977, and by September 1978 the ‘Lizard’ scheme became a minor, though well-remembered, camouflage oddity.
Fairchild-Republic A-10 Warthog (USAF Peanut Camouflage) (1:48 scale) - 917 TFW.
- the definitive die-cast re-creation of the plane that revolutionized the use of close air support for ground forces.
- hand-painted in authentic desert camouflage.
- assembled by hand in 1:48 scale.
- features fully removable cockpit canopy and rolling wheels.
- complete with a full complement of scale-size Maverick missiles.
- an absolute must for any military aircraft collection
Fairey Gannet (Australian Navy) (1:72 scale) - The Fairey Gannet was a British carrier-borne anti-submarine warfare and airborne early warning aircraft of the post Second World War era developed for the Royal Navy"s Fleet Air Arm by the Fairey Aviation Company. It is a mid-wing monoplane with a tricycle undercarriage manned by a crew of three and double turbo-prop engine driving two contra-rotating propellers.
Fairey Gannet AS14 (Indonesian Navy) (1:72 scale) - The Fairey Gannet was a British carrier-borne anti-submarine warfare and airborne early warning aircraft of the post Second World War era developed for the Royal Navy"s Fleet Air Arm by the Fairey Aviation Company. It is a mid-wing monoplane with a tricycle undercarriage manned by a crew of three and double turbo-prop engine driving two contra-rotating propellers.
Fairey Gannet Mk4 XA454 (RAF 849 Sqn HMS Hermes 1970) (1:72 scale) - The Fairey Gannet was a British carrier-borne anti-submarine warfare and airborne early warning aircraft of the post Second World War era developed for the Royal Navy"s Fleet Air Arm by the Fairey Aviation Company. It is a mid-wing monoplane with a tricycle undercarriage manned by a crew of three and double turbo-prop engine driving two contra-rotating propellers
Fairey Gannet Mk4 XG797/277 (Royal Navy IWM Duxford) (1:72 scale) - The Fairey Gannet was a British carrier-borne anti-submarine warfare and airborne early warning aircraft of the post Second World War era developed for the Royal Navy"s Fleet Air Arm by the Fairey Aviation Company. It is a mid-wing monoplane with a tricycle undercarriage manned by a crew of three and double turbo-prop engine driving two contra-rotating propellers.
Falconer Predator Figure (1:6 scale) - Sideshow Collectibles and Hot Toys are proud to present the 1/6th scale Falconer Predator Collectible Figure from the Predators movie. The movie-accurate Falconer Predator collectible is specially crafted based on his image in the movie, highlighting the highly detailed head and body armory, facemask, armor and weapons.
The Falconer Predator 12 inch Figure features:
•Authentic and fully detailed likeness of Falconer Predator in the movie Predators
•Realistic and accurate 1/6th scale of 14 inches tall
•Over 22 points of articulations
•Highly detailed head and body armory
•Two pairs of interchangeable palms including:
•One pair of fists
•One pair of relaxed palms
•Three interchangeable metal blades of different lengths
•Newly sculpted Predator skull
•Falcon accessory
•Faux-leather skirt and straps
•One pair of forearm armor with right one for inserting blade
•One pair of thigh armor
•One left waist armor
•Facemask with LED light-up function (non-detachable)
•Figure stand with Falconer Predator nameplate and Predators movie logo
Falconer Predator Maquette - Sideshow is proud to partner with KNB EFX GROUP to bring you the Predators Collectible line from the 2010 film release. Each piece is individually painted and finished, each with its own unique quality and detail that is the trademark of a handcrafted Sideshow Collectibles product. Presenting a scaled full-figure study of the newly developed Predator creature designs for the film by KNB, The Falconer Predator Maquette is an incredible and detailed addition to any Predator legacy display.
A warrior race of alien creatures known as Predators travel to Earth to abduct a group of humans, all ruthless killers, and deposit them on a dangerous jungle planet that serves as their game preserve. Banding together, the humans soon realize that they have been gathered as prey for a new breed of Predators. As the technologically and physically superior Predators systematically eliminate members of the group, they must find a way to work together to escape or face their own extinction.
Falconer Predator Mask Prop Replica - Sideshow is proud to partner with KNB EFX GROUP to bring you the Predators Collectible line from the 2010 film release. Each prop replica is an exact full-scale reproduction of the original on-screen prop, as created by KNB. Each piece is individually painted and finished, each with its own unique quality and detail that is the trademark of a handcrafted Sideshow Collectibles product. The Falconer Predator Mask Prop Replica is an incredible addition to any Predator legacy display, an outstanding beginning to Sideshow"s new Predators collectible line.
Please note: While the item is a prop replica, it is intended for display purposes only. Wearing the item or active physical use of the item is not recommended.
A warrior race of alien creatures known as Predators travel to Earth to abduct a group of humans, all ruthless killers, and deposit them on a dangerous jungle planet that serves as their game preserve. Banding together, the humans soon realize that they have been gathered as prey for a new breed of Predators. As the technologically and physically superior Predators systematically eliminate members of the group, they must find a way to work together to escape or face their own extinction.
During a hunt, Predators wear technologically advanced masks that offer protection and add to their sensory abilities. Each mask is equipped with multiple vision modes, including night vision and thermal vision. Fellow warriors appear white while targets appear red or green. Predators can use their masks as a targeting device, zooming in on their prey for precise kills at long range. Protecting the Predators, the masks act as a pollution filter while shields their faces, and Predator warriors embellish their masks to demonstrate honor and status.
Famers Market Figure Set 1:64 scale American Diorama Diorama Accessory This Famers Market Figure Set diorama accessory. It is made by American Diorama and is 1:64 scale (approx. 3cm / 1.2in tall).
Family With 5 Figures and Bench 1:64 scale American Diorama Diecast Model Car Diorama This Family (With 5 Figures and Bench) diecast model car diorama. It is made by American Diorama and is 1:64 scale (approx. 2.5cm / 1in tall).
Family Restaurant Table and Chair 1:12 scale Hasegawa Diorama Accessory Kit This Family Restaurant Table and Chair diorama accessory kit. It is a self assembly kit made by Hasegawa and is 1:12 scale (approx. 5cm / 2in wide).
Fantasic Beasts Bookmarks Gift Set from Fantastic Beasts And Where To Find Them - Noble Collection NN7553 Fantasic Beasts Bookmarks Gift Set from Fantastic Beasts And Where To Find Them. It is made by Noble Collection and is approx. 7cm / 2.8in tall.
Albus Dumbledore's Wand Prop Replica from Fantastic Beasts The Crimes of Grindelwald - Noble Collection NN8594 Albus Dumbledore's Wand Prop Replica from Fantastic Beasts The Crimes of Grindelwald. It is made by Noble Collection and is approx. 35cm / 13.8in long.
Fwooper Statue from Fantastic Beasts And Where To Find Them - Noble Collection NN5258 Fwooper Statue from Fantastic Beasts And Where To Find Them. It is made by Noble Collection and is approx. 18cm / 7.1in high.
Gellert Grindelwald Character Wand Prop Replica from Fantastic Beasts - Noble Collection NN8230 Gellert Grindelwald Character Wand Prop Replica from Fantastic Beasts. It is made by Noble Collection and is approx. 30cm / 11.8in long.
Gellert Grindelwald Figure from Fantastic Beasts The Crimes of Grindelwald - Star Ace SA8013 Gellert Grindelwald Figure from Fantastic Beasts The Crimes of Grindelwald. It is made by Star Ace and is 1:8 scale (approx. 22.5cm / 8.9in tall).
Leta Lestrange Wand Prop Replica from Fantastic Beasts The Crimes of Grindelwald - Noble Collection NN8071-DAMAGEDITEM DAMAGES: Outer packaging damaged
Leta Lestrange Wand Prop Replica from Fantastic Beasts The Crimes of Grindelwald. It is made by Noble Collection and is approx. 35cm / 13.8in long.
Newt Scamander Figure from Fantastic Beasts The Crimes of Grindelwald - Star Ace SA8012 Newt Scamander Figure from Fantastic Beasts The Crimes of Grindelwald. It is made by Star Ace and is 1:8 scale (approx. 22.5cm / 8.9in tall).
Newt Scamander's Wand Wand Collection Prop Replica from Fantastic Beasts And Where To Find Them - Noble Collection NN8580 Newt Scamander's Wand Wand Collection Prop Replica from Fantastic Beasts And Where To Find Them. It is made by Noble Collection and is approx. 36cm / 14.2in long.
Nicolas Flamel Wand Prop Replica from Fantastic Beasts The Crimes of Grindelwald - Noble Collection NN8079-DAMAGEDITEM DAMAGES: Cracked handle
Nicolas Flamel Wand Prop Replica from Fantastic Beasts The Crimes of Grindelwald. It is made by Noble Collection and is approx. 35cm / 13.8in long.
Niffler Statue from Fantastic Beasts And Where To Find Them - Noble Collection NN5248-DAMAGEDITEM DAMAGES: Broken Case
Niffler Statue from Fantastic Beasts And Where To Find Them. It is made by Noble Collection and is approx. 18cm / 7.1in high.
Seraphina Picquery Wand Prop Replica from Fantastic Beasts And Where To Find Them - Noble Collection NN5630-DAMAGEDITEM DAMAGES: Box damge, wand is undamaged
Seraphina Picquery Wand Prop Replica from Fantastic Beasts And Where To Find Them. It is made by Noble Collection and is approx. 35cm / 13.8in long.
Seraphina Picquery's Wand Prop Replica from Fantastic Beasts And Where To Find Them - Noble Collection NN8582 Seraphina Picquery's Wand Prop Replica from Fantastic Beasts And Where To Find Them. It is made by Noble Collection and is approx. 35cm / 13.8in long.
Farewell To Arms Ash Figure - After a relaxing cabin vacation does not go as planned, Ash is left with three dead friends, an undead girlfriend and an angry evil spirit on the loose. As nightfall approaches, Ash must prepare to battle the legions of the damned if he wants to make it to dawn.
Comes with interchangeable right forearms, severed possessed hand, shotgun, and axe accessories.
Farm Boy Luke Skywalker Mini Bust - Before he joined the Rebellion, before he met Yoda and trained to become a Jedi, before he knew his father was the Dark Lord Vader; Luke Skywalker spent his days on his Uncle Owen"s Moisture Farm. As a teenager he dreamed of adventures beyond Tatooine, primarily joining the Imperial Academy and becoming the greatest pilot in the galaxy. In Star Wars: A New Hope, Obi Wan Kenobi hands Luke his fathers Light Saber for the first time, as depicted here in this new mini bust capturing the youthful essence of the soon to be Jedi Knight. Luke stands approx. 6> tall and includes a detailed lightsaber raised up over his head. This high quality polystone strictly limited edition hand numbered collectible comes complete with a matching certificate of authenticity.
SpecCast 1:16 Farmall 544 Gas Narrow Front Tractor with Four Row Cultivator Diecast Model 647 ZJD1709 This Farmall 544 Gas Narrow Front Tractor with Four Row Cultivator is red and features working steering, wheels. It is made by SpecCast and is 1:16 scale (approx. 20cm / 7.9in long).
Nano Hollywood Rides Dom's Dodge Charger, Brian's Mitsubishi Eclipse, Brian's Ford F-150 Diecast Model Car from Fast And Furious - Jada JAN31123 Nano Hollywood Rides Dom's Dodge Charger, Brian's Mitsubishi Eclipse, Brian's Ford F-150 Diecast Model Car from Fast And Furious. It is made by Jada and is approx. 4cm / 1.6in long.
Faun Figure from Pan`s Labyrinth, NECA 33153 NECA's new collaboration with renowned movie director Guillermo Del Toro brings select characters from Del Toro's films to life in premium action figure format with deluxe added elements. From the dark fantasy film Pan's Labyrinth, the mysterious Faun stands over 9" tall, is superposeable and comes with detailed satchels, bone flute, dagger, and more. Collectible deluxe window boxed packaging.
Fawkes 12 Inch Plush from Harry Potter - Noble Collection NN8873 Fawkes 12 Inch Plush from Harry Potter. It is made by Noble Collection and is approx. 30cm / 11.8in high.
Fawkes Figure from Harry Potter - Noble Collection NN7540 Fawkes Figure from Harry Potter. It is made by Noble Collection and is approx. 18cm / 7.1in high.
Fawkes Plush from Harry Potter - Noble Collection NN7559 A soft plush representation of Fawkes, Dumbledore’s noble and loyal phoenix companion. Notably, his tail feathers formed the core of both Harry and Voldemort’s wands. This plush is a smaller version of our Fawkes Collector’s Plush.
Fawkes Statue (Damaged Item) from Harry Potter - Noble Collection NN7200-DAMAGEDITEM DAMAGE: Legs have broken off of the Phoenix.
Fawkes Statue (Damaged Item) from Harry Potter. It is made by Noble Collection and is approx. 35cm / 13.8in tall.
Felix Felicis Pendant from Harry Potter and The Half Blood Prince - Noble Collection NN8599 Felix Felicis Pendant from Harry Potter and The Half Blood Prince. It is made by Noble Collection and is approx. 6cm / 2.4in high.
Feltham UCC 1931 1:76 scale Ex Mag Diecast Model Tram This Feltham UCC (1931) diecast model tram is red and cream. It is made by Ex Mag and is 1:76 scale.
Fendt 1050 Universal Hobbies Keychain Tractor This Fendt 1050 keychain tractor is green. It is made by Universal Hobbies and is approx. 3.5cm / 1.4in long.
Fendt 1050 Vario 1:32 scale Bburago Diecast Model Tractor This Fendt 1050 Vario diecast model tractor is green and features working wheels. It is made by Bburago and is 1:50 scale (approx. 10cm / 3.9in long).
Fendt 1050 Vario With 3 Trailer Set 1:50 scale Bburago Diecast Model Tractor Set This Fendt 1050 Vario (With 3 Trailer Set) diecast model tractor set is green and features working hook, wheels. It is made by Bburago and is 1:50 scale (approx. 10cm / 3.9in long).
Fendt 2 with Amazone S300 Sprayer 1:32 scale Universal Hobbies Diecast Model This Fendt 2 with Amazone S300 Sprayer diecast model is green and features working wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 14cm / 5.5in long). Limited edition of 1000 pieces worldwide.
Fendt 516 Vario Tractor with Front Loader 1:32 scale Universal Hobbies Diecast Model This Fendt 516 Vario Tractor with Front Loader diecast model is green and features working bucket, front lift, wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 18cm / 7.1in long).
Universal Hobbies 1:32 Fendt 5255L Combine Harvester Diecast Model J4193 This Fendt 5255L Combine Harvester is green and features working grain chute, wheels, reel. It is made by Universal Hobbies and is 1:32 scale (approx. 25cm / 9.8in long).
Universal Hobbies 1:32 Fendt 724 Vario 2017 Diecast Model J5231 This Fendt 724 Vario (2017) diecast model is nature green and features working wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 15cm / 5.9in long).
Fendt 939 Vario Universal Hobbies Keychain Tractor This Fendt 939 Vario keychain tractor is green. It is made by Universal Hobbies and is approx. 9cm / 3.5in long.
Fendt Farmer 105S 2WD Tractor 1:32 scale Universal Hobbies Diecast Model This Fendt Farmer 105S 2WD Tractor diecast model is green and features working wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 12cm / 4.7in long).
Fendt Farmer 3S 2WD Tractor 1:32 scale Universal Hobbies Diecast Model This Fendt Farmer 3S 2WD Tractor diecast model is green and features working wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 11cm / 4.3in long).
Fendt Katana 65 Universal Hobbies Keychain Harvester This Fendt Katana 65 keychain harvester is green. It is made by Universal Hobbies and is approx. 11cm / 4.3in long.
Fendt Vario 1050 With Combination Trailer Bburago Diecast Model This Fendt Vario 1050 (With Combination Trailer) diecast model is green and features working linkage, arms, wheels. It is made by Bburago and is approx. 25cm / 9.8in long.
Fendt Vario 1050 With Livestock Forwarder Bburago Diecast Model This Fendt Vario 1050 (With Livestock Forwarder) diecast model is green and features working wheels, linkage and opening trailer doors. It is made by Bburago and is approx. 28cm / 11in long. With Motorised Wheels.
Fendt Vario 1050 With Tipping Trailer Bburago Diecast Model This Fendt Vario 1050 (With Tipping Trailer) diecast model is green and features working linkage, wheels and opening trailer doors. It is made by Bburago and is approx. 27cm / 10.6in long. With Motorised Wheels.
Fendt Vario 1050 With Tree Forwarder Bburago Diecast Model This Fendt Vario 1050 (With Tree Forwarder) diecast model is green and features working wheels, linkage, arms. It is made by Bburago and is approx. 30cm / 11.8in long. With Motorised Wheels.
Fendt Vario 722 Tractor with Front Loader 1:32 scale Universal Hobbies Diecast Model This Fendt Vario 722 Tractor with Front Loader diecast model is green and features working bucket, front lift, wheels. It is made by Universal Hobbies and is 1:32 scale.
Fenrir Greyback Character Wand Prop Replica from Harry Potter - Noble Collection NN8296 Fenrir Greyback Character Wand Prop Replica from Harry Potter. It is made by Noble Collection and is approx. 30cm / 11.8in long.
Ferguson FE35 Tractor 1956 1:16 scale Universal Hobbies Diecast Model This Ferguson FE35 Tractor (1956) diecast model is grey and features working linkage, steering, wheels. It is made by Universal Hobbies and is 1:16 scale (approx. 20cm / 7.9in long).
Ferguson Implements Tiller/2 Row Potato Planter/Transport Box With Milk Churns/2 Furrow Plough 1:32 scale Universal Hobbies Diecast Model This Ferguson Implements (Tiller/2 Row Potato Planter/Transport Box With Milk Churns/2 Furrow Plough) diecast model is grey. It is made by Universal Hobbies and is 1:32 scale (approx. 24cm / 9.4in wide).
Ferguson Super Major New Performance 1964 1:32 scale Universal Hobbies Diecast Model This Ferguson Super Major New Performance (1964) diecast model is blue and features working linkage, wheels and opening bonnet with engine. It is made by Universal Hobbies and is 1:32 scale (approx. 10cm / 3.9in long).
Ferguson TE 20 With Sirocco Cab Including Rumptstad 2-Furrow Plough Set 1:32 scale Universal Hobbies Diecast Model This Ferguson TE 20 With Sirocco Cab (Including Rumptstad 2-Furrow Plough Set) diecast model is grey and features working wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 14cm / 5.5in long). Limited edition of 1000 pieces worldwide.
Ferguson TEA 20 Tractor 1:32 scale Universal Hobbies Diecast Model This Ferguson TEA 20 Tractor diecast model is grey and features working wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 10cm / 3.9in long).
Ferguson TEA 20 Tractor with High Lift Loader 1:32 scale Universal Hobbies Diecast Model This Ferguson TEA 20 Tractor with High Lift Loader diecast model is grey and features working front lift, wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 12cm / 4.7in long).
Ferguson TEA-20 Tractor with Half-Tracks 1:16 scale Universal Hobbies Diecast Model This Ferguson TEA-20 Tractor with Half-Tracks diecast model is grey and features working tracks, wheels and opening bonnet with engine. It is made by Universal Hobbies and is 1:16 scale (approx. 18cm / 7.1in long).
This Ferguson TO 35 (1957) Diecast Model Tractor is Cream and features working linkage, wheels. It is made by Universal Hobbies and is 1:32 scale (approx. 13cm / 5.1in long).
Ferrari 126 c2 Italian GP 1982 1:43 scale Ex Mag Diecast Model Grand Prix Car This Ferrari 126 c2 (Italian GP 1982 driven by Mario Andretti) diecast model grand prix car is red/black/silver and features working wheels. It is made by Ex Mag and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 156 (John Surtees Winner German GP 1963) in Red (1:43 scale) - >La Storia> is IXO"s celebration of the unrivalled racing history of Ferrari"s Grand Prix cars. Each model comes in its own custom labelled metal, book-shaped box complete with booklet detailing the car"s history and specifications. This is a fine addition to the collection of any Ferrari or GP fan.
Ferrari 156 F1 Dino (Plain Colour) in Red (1:18 scale) - The 1961 Formula 1 season came up with a completely new rule type. The racing teams had to switch their engines from 2.5 to 1.5 litres. Ferrari found itself in a very good position. They had developed a V6 mid-mounted engine with a 120 degrees cylinder angle and a maximum output of 190 hp. The new 156 F1 had a very unusual front design. So pretty soon, many people gave it the nickname Sharknose. Technically and ostensibly, the 156F1 was the most successful development in 1961.
The season ended for the Scuderia with a large success but also with a disastrous tragedy. Phil Hill became the first American Formula 1 World Champion. The German Ferrari star Wolfgang Graf Berghe von Trips, that led the ranking for most of the season, became involved in a deadly accident in Monza. Never before joy and teariness was that close on just one day.
Annotation: It is factual that no original Ferrari 156 F1 exists in the whole world. But after months of meticulous research and contacting countless Ferrari experts, CMC was able to get all necessary data for a harmonious model development. Thanks to that kind of knowledge about the car and its famous drivers, we are in a position to accomplish this mission impossible with true-to-the-original details and the well known CMC craftsmanship and quality.
Ferrari 158 (John Surtees Winner Monza GP 1964) in Red (1:43 scale) - >La Storia> is IXO"s celebration of the unrivalled racing history of Ferrari"s Grand Prix cars. Each model comes in its own custom labelled metal, book-shaped box complete with booklet detailing the car"s history and specifications. This is a fine addition to the collection of any Ferrari or GP fan.
Ferrari 212 Inter Coupe Vignale 1953 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 212 Inter Coupe Vignale (1953) resin model car is black and green. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). Limited edition of 408 pieces worldwide. This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 212/225 Inter Barchetta Touring 0253 1952 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 212/225 Inter Barchetta Touring 0253 (1952) resin model car is black. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 248 (Michael Schumacher Anatomy Of A Champion) in Red (1:18 scale) - Features a Ferrari (half red, half carbon fibre effect) attached to a vertical display plinth. This limited edition of 7676 pieces comes with leaping Schumi figure and engine piece.
Ferrari 250 GT Berlinetta (Eric Clapton) in Silver (1:18 scale) - The 250 GT Berlinetta Lusso, which made its debut at the 1962 Paris Salon, was the final model in the 250 GT series in pure road-car form and continued in production until the latter part of 1964. It was the direct replacement for the previous Berlinetta. The body styling from Pininfarina won immediate praise and featured a front-end design with a wide and low egg crate grille similar to the 250 GT ‘SWB’ Berlinetta. The chassis construction was similar to that of the concurrent 250 GT Passo Corto ‘SWB’ berlinettas: two large, oval section longitudinal members with cross bracing, but with the engine mounted further forward in the frame to increase cabin space. Like their stable mates, they were available as right- or left-hand drive.
The 250 GT Berlinetta owned by guitar legend Eric Clapton, in its luxury version, is one of a limited run of 350 models produced by Ferrari. Thanks to its elegance and uniqueness, in 2004 Sports Car International placed this car tenth on a list of Top Sports Cars of the 1960s. The 1:18th scale model will reward even the most judicious collector with its extraordinary accuracy and elegance!
Ferrari 250 GT Berlinetta Competizione (SWB) in Red (1:18 scale) - Handmounted, all-metal precision model made of more than 1100 individual parts. The quality and the level of detail of that model is equal to its successful predecessor, the Ferrari 250 GT/SWB street version (item number M-046).
Ferrari has remained the most prestigious manufacturer of Gran Turismo motorcars to this day. From the mid-1950s through to the beginning of the 1960s, the Ferrari 250 GT Berlinettas dominated the GT-class races around the world. The production of Berlinettas started with a long wheel base version, followed by a short wheel base version, which was introduced in 1959 and became a fixture until the 250 Series was eventually phased out of production.
The >Competizione> comes with many distinctive features compared to the street version:
· The bumpers have been removed
· Additional front air inlets for the cooling of the disk brakes
· Big 16 inch wheel in the dimensions 6 x 16 (front) and 6.5 x 16 (rear)
· Different exhaust pipes with chromed SNAP extractors
· Underside including cover plate
· Quick lifting jacks in the front
· Movable racing tank with quick opening / closing device (without fuel tank cap)
· Rearranged boot with a larger tank (130 litres) and removable spare wheel
· Different dashboard with a black varnish surface
· Door side trim panel is uncovered (without window crank mechanism)
· Carburettor system with open induction funnels and air shield
Ferrari 250 GT Berlinetta Competizione SWB (Le Mans 1961) in Silver (1:18 scale) - In 2008, a Ferrari 250 GT landed one of the highest bids that had every been made in an automobile auction. Including all charges and surcharges, the bidder was willing to pay 7.04 Million Euros (approx. 10 Million US Dollars) for the vehicle. Why? Just two words, which happened to be the title of the auction: Leggenda e passione or >legend and passion>. By the end of the 1950’s, the 250 GT was already a much demanded car. Aristocrats or Hollywood stars -- the ones who could afford it -- tried to lay their hands on a street version. Famous race drivers, such as Stirling Moss, Wolfgang Graf Berghe von Trips, John Surtees and Maurice Trintignant, virtually felt obliged to drive a racing version of the 250 GT called >Competizione>. Perhaps no other car has had such an impact on the history of the Scuderia Ferrari.
Ferrari 250 GT Berlinetta Speciale 1956 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 250 GT Berlinetta Speciale (1956) resin model car is metallic grey. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 250 GT Berlinetta Speciale 1956 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 250 GT Berlinetta Speciale (1956) resin model car is silver. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 250 GT Cabriolet Series I Pininfarina 1957 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 250 GT Cabriolet Series I Pininfarina (1957) resin model car is blue. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 250 GT Cabriolet Series I Pininfarina 1957 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 250 GT Cabriolet Series I Pininfarina (1957) resin model car is red. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 250 GT California Spyder Short Wheelbase in Black (1:18 scale) - Many Ferrari aficionados consider the 250 California Short Wheel Base Spyder one of the most beautiful and functional cars ever made. This model was constructed in two distinct series: the ‘LWB’ (long wheelbase), between 1958 and 1960, and the ‘SWB’ (short wheelbase) from 1960 to 1962. The latter example wasn"t actually completed until early 1963, with sub-divisions relative to body and mechanical details. A removable hard-top was available for both series.
Certainly the actor James Coburn very much loved this car. With body work designed by Pininfarina and built by Scaglietti, the car was a collaboration between the very best. The car sold for more than 10 million US dollars at a recent auction and Hot Wheels EliteTM reproduces it in 1:18th scale!
Ferrari 250 GT Coupe Pininfarina 1958 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 250 GT Coupe Pininfarina (1958) resin model car is red. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). Limited edition of 408 pieces worldwide. This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 250 GT Coupe Pininfarina 1958 1:43 scale Matrix Scale Models Resin Model Car This Ferrari 250 GT Coupe Pininfarina (1958) resin model car is silver. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). Limited edition of 408 pieces worldwide. This model also comes in its own display case to keep it in perfect dust free condition.
Ferrari 250 GT Passo Corto Elite Version (1961) in Red (1:18 scale) - One of the most important GT car of its time, the Ferrari 250 GT Berlinetta passo corto >SWB> was first unveiled at the 1959 Paris Salon. The designation >SWB> indicated the short wheelbase chassis designed for better handling compared to the former long wheelbase version. The car was available in competition specification with an aluminum body, lightweight interior trim and with the engine in a higher state of tune.
The car was hugely successful in racing, capable of beating many larger-engine vehicles. In 2004, Sports Car International placed the 250 GT Berlinetta passo corto >SWB> seventh on a list of Top Sports Cars of the 1960s. Motor Trend Classic placed it fifth on a list of the ten >Greatest Ferraris of All Time>. The 1:18th replica is a must for any Ferrari collector!
Ferrari 250 GT Passo Corto Elite Version (1961) in Dark Blue (1:18 scale) - One of the most important GT car of its time, the Ferrari 250 GT Berlinetta passo corto >SWB> was first unveiled at the 1959 Paris Salon. The designation >SWB> indicated the short wheelbase chassis designed for better handling compared to the former long wheelbase version. The car was available in competition specification with an aluminum body, lightweight interior trim and with the engine in a higher state of tune.
The car was hugely successful in racing, capable of beating many larger-engine vehicles. In 2004, Sports Car International placed the 250 GT Berlinetta passo corto >SWB> seventh on a list of Top Sports Cars of the 1960s. Motor Trend Classic placed it fifth on a list of the ten >Greatest Ferraris of All Time>. The 1:18th replica is a must for any Ferrari collector!
Ferrari 250 GT Passo Corto Stirling Moss Winner RAC Tourist Trophy 1960 1:43 scale Matrix Scale Models Resin Model This Ferrari 250 GT Passo Corto (Winner RAC Tourist Trophy 1960 driven by Stirling Moss) resin model is dark blue. It is made by Matrix Scale Models and is 1:43 scale (approx. 10cm / 3.9in long). This model also comes in its own display case to keep it in perfect dust free condition.