30A PWM shunt battery charging SOC battery regulation or programmable to voltage based regulation Boost equalisation and float charging cycles Automatic load disconnection when battery state of charge is low Automatic load reconnection Temperature compensation Field adjustable parameters High and low voltage disconnect LED displays showing battery condition and system status Reverse polarity protection Maximum self-consumption of 5mA Suitable for flooded lead acid or gel batteries Terminal size 16mm Order Code N08GW is for 12V systems Order Code N00HW is for 24V systems This 30 amp shunt charge controller provides a versatile and cost effective solution for small scale battery based systems using the Wren micro turbine as a power input. Samray have taken well proven and trusted PV charge controller technology and adapted it for use with the Wren micro turbine range.Thanks to the unique design of the permanent magnet alternators used on the Wren it is possible to use shunt regulation to prevent the turbine from overcharging the batteries without the need for dump loads. The heart of the controller is based around a microprocessor control providing a selection of different charging cycles using Pulse Width Modulation PWM. The controller also features a self-learning algorithm to provide accurate state-of-charge SOC metering of the battery - The best insurance for a long battery lifetime. The controller also features a load disconnect facility to prevent the battery from becoming discharged too deeply and therefore further helps protect your battery bank. All of these features are packed into a compact anodised aluminium enclosure requiring a minimal mounting footprint. This allows hassle free connection and operation of the controller and Wren micro turbine.The shunt controller is available for 12V systems Order Code N08GW and for 24V systems Order Code N00HW
30A PWM shunt battery charging SOC battery regulation or programmable to voltage based regulation Boost equalisation and float charging cycles Automatic load disconnection when battery state of charge is low Automatic load reconnection Temperature compensation Field adjustable parameters High and low voltage disconnect LED displays showing battery condition and system status Reverse polarity protection Maximum self-consumption of 5mA Suitable for flooded lead acid or gel batteries Terminal size 16mm Order Code N08GW is for 12V systems Order Code N00HW is for 24V systems This 30 amp shunt charge controller provides a versatile and cost effective solution for small scale battery based systems using the Wren micro turbine as a power input. Samray have taken well proven and trusted PV charge controller technology and adapted it for use with the Wren micro turbine range.Thanks to the unique design of the permanent magnet alternators used on the Wren it is possible to use shunt regulation to prevent the turbine from overcharging the batteries without the need for dump loads. The heart of the controller is based around a microprocessor control providing a selection of different charging cycles using Pulse Width Modulation PWM. The controller also features a self-learning algorithm to provide accurate state-of-charge SOC metering of the battery - The best insurance for a long battery lifetime. The controller also features a load disconnect facility to prevent the battery from becoming discharged too deeply and therefore further helps protect your battery bank. All of these features are packed into a compact anodised aluminium enclosure requiring a minimal mounting footprint. This allows hassle free connection and operation of the controller and Wren micro turbine.The shunt controller is available for 12V systems Order Code N08GW and for 24V systems Order Code N00HW
Ideal for motor homes camping marine and outdoor use Compact design with no spinning blades No mounting hardware required Not sensitive to wind direction Effective with wind speed of 8 - 10ms Includes 2m cables with alligator clips Does not need a separate charge controller Conventional wind generators have the disadvantage that they occupy a lot of space with their spinning blades and large poles. This vertical axis generator solves the problem this by taking up much less space. It can be mounted on a boat mobile home caravan or small building. It is also more suitable for areas where the wind direction changes as they dont need to be pointed in the wind direction to work. The telescopic design means you can fold the generator to half its length when not in use or when there are high wind speeds and an LED display give you a readout of output voltage so you know when its working effectively.Cables mounting bars and a strong magnetic base are included so this is a complete portable wind generator solution for camping boating fishing etc.There is no need to use a charge controller when charging the battery. The battery can be connected directly to the battery terminal of the Wind generator for charging. When the battery is fully charged the generator will automatically cut off the power to battery and the display will go out. Technical specifications Voltage outputDC 12-16VCurrent output4A maximumWeight4.5kgDimensions455655h x 280w x 150dmm
Uses wind power to charge its built-in battery Charges MP3 players digital cameras mobile phones and more Supplied with 5 phone connectors a retractable USB lead and a mains charger Includes a clamp to catch the wind while on your bike The HYmini is a portable hybrid universal power unit that stores energy to its built in 1200mAh rechargeable lithium polymer battery. The HYmini can be charged using wind power mains power or via USB. It can charge a number of digital devices including MP3 players digital cameras and mobile phones. On average its fully charged battery can completely charge your mobile phone twice. It comes with a clamp for use on your bike beach wind break poles boat or car. It is a great alternative to solar for eco powering your devices especially if there is generally more wind than sun Technical specifications Cell typeEmbedded Lithium ion polymer batteryCell capacity1200mAhCharging current from mains1000mACharging current from wind25mA to 120mACharging current from USB500mABattery technologyLithium Ion Polymer 500 cyclesPower typeBuilt in switch modeAC input100 - 240VLED charge indicatorWall plug amp wind turbineLED status indicatorWind GreenCharging Wall plug RedCharging GreenChargedExtra featuresLED night light