This handy tool combines all the power & vibration of an air hammer, with all of the attributes of a 1/2" drive impact driver. For a seized fastener, especially if it’s countersunk, the traditional remedy has been the impact driver. But what happens when even an impact driver cannot budge that seized screw? Laser have a new type of impact driver (part number 6064), designed to work with an air hammer, & this new tool combines the massive hammering force with the impact driver’s turning action This bi-directional impact driver also features a half inch square drive, & when used with an impact socket, the tightest nut or bolt will soon yield. It also works with both left & right-hand threads & is particularly suited to the Laser 6031 air hammer (sold separately). The kit

Includes:: a soft rubber coated side handle, the air hammer adaptor & four 5/16" hex shank bits: Phillips PH2 & PH4 & flat 8mm & 10mm.

...

This oil filter spanner has been manufactured from chrome plated vanadium steel, & is designed to be used Euro 6 compliant engines from 2010 onwards, including the Ford Duratorq TDCI (DW12C) diesel engines: S Max/ Mondeo/ Galaxy. ...

The Laser 6071 means that you can speed up the process of thread cutting & cleaning with this innovative tap & die holder. This tap & die holder set from Laser is designed to make the task a lot easier, by featuring comfortable grips & an innovative switching function that means the tool is not released to change from clockwise to anticlockwise direction. Can be used with most taps & dies within the size range. Two tap holders are included, M3-M6 & M6-M12; they fit directly into the ratchet handle & are held in place securely. As the cutting operation starts in a clockwise direction, the adjusting handle is simply flicked up to change to anticlockwise to relieve the metal swarf build-up. Completing this kit is a blow mould case for easy storage. ...

The Laser hose clip pliers are designed to remove turbo boost hose clips fitted to: Volkswagen Passat 2.0 TDi (05)/ Touran/ Golf V Skoda Octavia & Audi A3 cars. This tool

Includes:: a locking function for better grip & a robust build for enhanced reliability.

...

The Torch with Heat Shrink Tubing Set features 162 pieces & is the ideal kit for customers who are rewiring or repairing a vehicles wiring loom or just wanting to tidy up old cables. ...

The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement of run-out on almost any rotating component including: Brake disc run-out Drive flange run-out & end float Differential drive flange run-out End float propeller shaft run-out Flywheel run-out Crankshaft end float Crankshaft & bearing ovality Lathe/turning machine run-out & ovality. The 6084 can also be used on motorcycles. The simple locking pliers allow the tool to be locked to any handy suspension bracket or component, & its unique design allows the DTi gauge to be rigidly mounted in almost any position. ...

The 6092 is an air hammer extractor adaptor for the removal of diesel injectors/bushes & allows effective transmission of impact force & vibration to any adaptor with a 5/8" thread. For diesel injector extraction use this model with with: 4760 Delphi/ Bosch CR kit, 5128 Bosch CR Dual Connection Adaptor, 6118 Siemens M25, 6119 Denso M20, 6120 Siemens M27, 6121 non CR M12 injectors, 6122 Delphi M14 & 6123 off-line adaptor. This tool uses the power of the air hammer to withdraw & extract seized & stuck components such as diesel injectors, pivot pins & small diameter bearings. Once the extractor is screwed on to the injector, & the air hammer connected, the powerful impact & vibration will help extract the most stubborn components. Completing this tool is a robust design & reliable manufacture in Sheffield. ...

The Laser 6094 helmet is suitable for both MIG, TIG & Arc welding. It also has a 98 x 62mm viewing lens for better visibility while working. Completing this helmet is CE certification/EN379/EN175 for ensured safety & a striking design for added style. ...

A combination spanner, made from chrome vanadium. This spanner is part of a range of jumbo spanners in sizes from 55mm up to 105mm ...

The Laser inverter MIG welder is a comfortable, ergonomic torch offering professional control & performance & its inverter design allows high-current welding from a 230V single phase supply. This conveniently sized unit welds steel or alloy & convenient internal 100mm wire spools are available in steel, aluminium or MIG braze-welding (not supplied). Completing this tool is easy adjustment of voltage & wire feed or use multi-function welding programmes for repeat work, material type, thickness & a durable manufacture in Italy for added reliability. ...