The Laser 6055 will make sure that your tyre pressures are set accurately. Having properly inflated tyres means better fuel consumption, tyres don’t wear out as quickly. The valve connector is angled & swivels for ease of access & the hose is 550mm in length. Completing this tool is a 2.5 inch (63.5mm) gauge diameter & a brightly coloured face for ease of reading. ...

This handy tool combines all the power & vibration of an air hammer, with all of the attributes of a 1/2" drive impact driver. For a seized fastener, especially if it’s countersunk, the traditional remedy has been the impact driver. But what happens when even an impact driver cannot budge that seized screw? Laser have a new type of impact driver (part number 6064), designed to work with an air hammer, & this new tool combines the massive hammering force with the impact driver’s turning action This bi-directional impact driver also features a half inch square drive, & when used with an impact socket, the tightest nut or bolt will soon yield. It also works with both left & right-hand threads & is particularly suited to the Laser 6031 air hammer (sold separately). The kit

Includes:: a soft rubber coated side handle, the air hammer adaptor & four 5/16" hex shank bits: Phillips PH2 & PH4 & flat 8mm & 10mm.

...

This oil filter spanner has been manufactured from chrome plated vanadium steel, & is designed to be used Euro 6 compliant engines from 2010 onwards, including the Ford Duratorq TDCI (DW12C) diesel engines: S Max/ Mondeo/ Galaxy. ...

The Laser 6071 means that you can speed up the process of thread cutting & cleaning with this innovative tap & die holder. This tap & die holder set from Laser is designed to make the task a lot easier, by featuring comfortable grips & an innovative switching function that means the tool is not released to change from clockwise to anticlockwise direction. Can be used with most taps & dies within the size range. Two tap holders are included, M3-M6 & M6-M12; they fit directly into the ratchet handle & are held in place securely. As the cutting operation starts in a clockwise direction, the adjusting handle is simply flicked up to change to anticlockwise to relieve the metal swarf build-up. Completing this kit is a blow mould case for easy storage. ...

The Laser hose clip pliers are designed to remove turbo boost hose clips fitted to: Volkswagen Passat 2.0 TDi (05)/ Touran/ Golf V Skoda Octavia & Audi A3 cars. This tool

Includes:: a locking function for better grip & a robust build for enhanced reliability.

...

This extension bar set from Laser Tools supplies ten essential tools for driving sockets, making it especially useful for the modern engine bay, where space is at a premium & accessibility can be difficult. As well as the four usefully sized, 3/8" drive extension bars (75mm, 150mm, 250mm & 460mm) this set also

Includes:: a sliding T-bar, universal joint, 5/16" & 1/4" bit adaptors & a 3/8" drive to 1/4" drive reducer. All the tools in this set are also manufactured from chrome vanadium for strength & reliability. The 6081

Includes:: an innovative & functional aluminium quick swivel handle on the 250mm & 460mm, meaning the extension bar goes straight through the centre & allows for speedy fastener removal. This set comes complete is a sturdy blow mould case for easy storage.



...

The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement of run-out on almost any rotating component including: Brake disc run-out Drive flange run-out & end float Differential drive flange run-out End float propeller shaft run-out Flywheel run-out Crankshaft end float Crankshaft & bearing ovality Lathe/turning machine run-out & ovality. The 6084 can also be used on motorcycles. The simple locking pliers allow the tool to be locked to any handy suspension bracket or component, & its unique design allows the DTi gauge to be rigidly mounted in almost any position. ...

The 6092 is an air hammer extractor adaptor for the removal of diesel injectors/bushes & allows effective transmission of impact force & vibration to any adaptor with a 5/8" thread. For diesel injector extraction use this model with with: 4760 Delphi/ Bosch CR kit, 5128 Bosch CR Dual Connection Adaptor, 6118 Siemens M25, 6119 Denso M20, 6120 Siemens M27, 6121 non CR M12 injectors, 6122 Delphi M14 & 6123 off-line adaptor. This tool uses the power of the air hammer to withdraw & extract seized & stuck components such as diesel injectors, pivot pins & small diameter bearings. Once the extractor is screwed on to the injector, & the air hammer connected, the powerful impact & vibration will help extract the most stubborn components. Completing this tool is a robust design & reliable manufacture in Sheffield. ...

The Laser 6094 helmet is suitable for both MIG, TIG & Arc welding. It also has a 98 x 62mm viewing lens for better visibility while working. Completing this helmet is CE certification/EN379/EN175 for ensured safety & a striking design for added style. ...

A combination spanner, made from chrome vanadium. This spanner is part of a range of jumbo spanners in sizes from 55mm up to 105mm ...