More From Contributor

The Laser 6071 means that you can speed up the process of thread cutting & cleaning with this innovative tap & die holder. This tap & die holder set from Laser is designed to make the task a lot easier, by featuring comfortable grips & an innovative switching function that means the tool is not released to change from clockwise to anticlockwise direction. Can be used with most taps & dies within the size range. Two tap holders are included, M3-M6 & M6-M12; they fit directly into the ratchet handle & are held in place securely. As the cutting operation starts in a clockwise direction, the adjusting handle is simply flicked up to change to anticlockwise to relieve the metal swarf build-up. Completing this kit is a blow mould case for easy storage. ...

Available

The Laser hose clip pliers are designed to remove turbo boost hose clips fitted to: Volkswagen Passat 2.0 TDi (05)/ Touran/ Golf V Skoda Octavia & Audi A3 cars. This tool

Includes:: a locking function for better grip & a robust build for enhanced reliability.

...

Available

The Torch with Heat Shrink Tubing Set features 162 pieces & is the ideal kit for customers who are rewiring or repairing a vehicles wiring loom or just wanting to tidy up old cables. ...

Available

This extension bar set from Laser Tools supplies ten essential tools for driving sockets, making it especially useful for the modern engine bay, where space is at a premium & accessibility can be difficult. As well as the four usefully sized, 3/8" drive extension bars (75mm, 150mm, 250mm & 460mm) this set also

Includes:: a sliding T-bar, universal joint, 5/16" & 1/4" bit adaptors & a 3/8" drive to 1/4" drive reducer. All the tools in this set are also manufactured from chrome vanadium for strength & reliability. The 6081

Includes:: an innovative & functional aluminium quick swivel handle on the 250mm & 460mm, meaning the extension bar goes straight through the centre & allows for speedy fastener removal. This set comes complete is a sturdy blow mould case for easy storage.

...

Available

The Laser 6084 is a 3 piece kit designed to allow a Dial Test Indicator (DTi) gauge to be mounted securely in position against the brake disc to measure disc warp. This kit is ideal for the measurement of run-out on almost any rotating component including: Brake disc run-out Drive flange run-out & end float Differential drive flange run-out End float propeller shaft run-out Flywheel run-out Crankshaft end float Crankshaft & bearing ovality Lathe/turning machine run-out & ovality. The 6084 can also be used on motorcycles. The simple locking pliers allow the tool to be locked to any handy suspension bracket or component, & its unique design allows the DTi gauge to be rigidly mounted in almost any position. ...

Available

The Laser 6094 helmet is suitable for both MIG, TIG & Arc welding. It also has a 98 x 62mm viewing lens for better visibility while working. Completing this helmet is CE certification/EN379/EN175 for ensured safety & a striking design for added style. ...

Available

A combination spanner, made from chrome vanadium. This spanner is part of a range of jumbo spanners in sizes from 55mm up to 105mm ...

Available

The Laser inverter MIG welder is a comfortable, ergonomic torch offering professional control & performance & its inverter design allows high-current welding from a 230V single phase supply. This conveniently sized unit welds steel or alloy & convenient internal 100mm wire spools are available in steel, aluminium or MIG braze-welding (not supplied). Completing this tool is easy adjustment of voltage & wire feed or use multi-function welding programmes for repeat work, material type, thickness & a durable manufacture in Italy for added reliability. ...

Available

The Laser 0.5kg spool of 1mm aluminium wire is specifically to be used with the Laser 6102 MIG welder. (MM Code 010116112). ...

Available

The Laser aluminium wire is 1mm aluminium wire 1kg designed to be used with the Laser 6102 (MM Code 010116112). ...

Available

Laser Laser 6092 Air Hammer Injector Extractor

The 6092 is an air hammer extractor adaptor for the removal of diesel injectors/bushes and allows effective transmission of impact force and vibration to any adaptor with a 5/8" thread. For diesel injector extraction use this model with with: 4760 Delphi/Bosch CR kit, 5128 Bosch CR Dual Connection Adaptor, 6118 Siemens M25, 6119 Denso M20, 6120 Siemens M27, 6121 non CR M12 injectors, 6122 Delphi M14 and 6123 off-line adaptor. This tool uses the power of the air hammer to withdraw and extract seized and stuck components such as diesel injectors, pivot pins and small diameter bearings. Once the extractor is screwed on to the injector, and the air hammer connected, the powerful impact and vibration will help extract the most stubborn components. Completing this tool is a robust
design and reliable manufacture in Sheffield.

Availability: In Stock
Supplier: Machine Mart
SKU: 000326092

Description Reviews / Comments Add New

Product Description

The 6092 is an air hammer extractor adaptor for the removal of diesel injectors/bushes & allows effective transmission of impact force & vibration to any adaptor with a 5/8" thread. For diesel injector extraction use this model with with: 4760 Delphi/ Bosch CR kit, 5128 Bosch CR Dual Connection Adaptor, 6118 Siemens M25, 6119 Denso M20, 6120 Siemens M27, 6121 non CR M12 injectors, 6122 Delphi M14 & 6123 off-line adaptor. This tool uses the power of the air hammer to withdraw & extract seized & stuck components such as diesel injectors, pivot pins & small diameter bearings. Once the extractor is screwed on to the injector, & the air hammer connected, the powerful impact & vibration will help extract the most stubborn components. Completing this tool is a robust design & reliable manufacture in Sheffield.

Reviews/Comments

Add New

Jargon Buster

Diameter - A measurement across a circle passing through the middle

Diesel - A fuel used in internal combustion engines

Diesel - An Italian clothing brand. Founded in 1978

injector - A pump like device used to convert pressure energy of motive fluid to velocity energy, drawing in fluid.

Hammer - A tool used for providing impact to an object such as a nail

robust - An physical or metaphorical object which is well built or hard to destroy

Components - Multiple items used to complete the product.

Small - something that takes up less space than normal.

Bearings - A direction or a way someone moves around.

Reliable - Something that is consistently good and can be trusted.

Design - A drawing or styles that shows the look and functionality of something before its made.

Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

Machine Mart

Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!

More From Contributor

Laser Laser 6092 Air Hammer Injector Extractor

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account