TO USE YOUR PLATING KIT, YOU WILL ALSO NEED the Common Plating Module which
Includes:: a 10 litre tub, Power Supply,
...

ZINC PLATING COMPLETE KIT CONTENTS Plating tank, 2 zinc plating salts, 1 zinc 757 solution, set zinc anodes (2), tank support rod set, support clip set, crocodile lead set, power supply, control unit, scourer powder, mask, gloves, eye protection glasses, cleaning cloth & instructions ...

KIT CONTENTS Plating tank, 1 zinc plating salts, 1 zinc 757 solution, set zinc anodes (2), tank support rod set, support clip set, crocodile lead set, power supply, control unit, scourer powder, mask, gloves, eye protection glasses, cleaning cloth & instructions ...

5 litre Zinc Post Plating Solution for Cadmium Zinc Plating. The cadmium-zinc plating found on washers, race car components etc is unsafe to do at home. However, our Cadmium-Zinc system gives the same finish & protection, using chemicals, which are not dangerous. ...

Zinc salts (5 litres, 1 kilo) for Zinc Plating Modules ...

Zinga is not paint. It is a pure zinc coating (with no pigments or extenders etc) & it will physically galvanise a car body or chassis & provide a great many years of protection against rust in any form. All conventional 2K automotive paints as well as basecoat or clear automotive paints can over coat Zinga. It can be primed with all standard 2K primers. Zinga Cold Galvani Zinc Coating  is a one-component anti-corrosion zinc coating system which contains a minimum of 96% zinc in the dry film. Its unique formula provides environmentally safe cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint. KEY FEATURES Longer protection than hot-dip galvanizing applied to the same thickness On site application by brush, spray,  aerosol or dip methods Can be applied on top of existing galvanising, existing or damaged Zinc thermal spray or a previously applied layer of Zinga Can be overcoated with most topcoat systems More than double the service life when used as part of a 2 stage system. E.g Excellent primer before overcoating  with powder or 2K paint products Good resistance to mechanical abrasion Excellent adhesion over grit blasted steel Extremely flexible Can be applied in extreme temperatures Weldable to X-ray quality Certified as non-flammable Unlimited shelf-life & unlimited pot-life Also Available: 500ml aerosol spray, 1KG Coating, 5kg,   25kg CAUTION:   When using cellulose or solvent-borne acrylic automotive primers, the Zinga cold galvanising system must first be sprayed with a water-based barrier coat. Zinga solve is the recommended thinner to be used with  Zinga Cold Galvani Zinc Coating when spraying. It can also be used for cleaning when using Zinga. Coverage: In practice, the quantity of Zinga required to coat a given area is dictated by both the required dry film thickness (DFT) & the depth of the blast-profile. As a guide to coat 1m 2 of steel with a Blast profile of 60micons Rz, at a DFT of 60microns (with no wastage) will require 0.41kg of Zinga. Or coverage equates to 2.41sqm per 1kg of Zinga. Read: " How ZINGA Works " from Technical Articles for more infomation Zinga Trouble-Shooting Chart ...

Zinga is not paint. It is a pure zinc coating (with no pigments or extenders etc) & it will physically galvanise a car body or chassis & provide a great many years of protection against rust in any form. All conventional 2K automotive paints as well as basecoat or clear automotive paints can over coat Zinga. It can be primed with all standard 2K primers. Zinga Cold Galvani Zinc Coating  is a one-component anti-corrosion zinc coating system which contains a minimum of 96% zinc in the dry film. Its unique formula provides environmentally safe cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint. KEY FEATURES Longer protection than hot-dip galvanizing applied to the same thickness On site application by brush, spray,  aerosol or dip methods Can be applied on top of existing galvanising, existing or damaged Zinc thermal spray or a previously applied layer of Zinga Can be overcoated with most topcoat systems More than double the service life when used as part of a 2 stage system. E.g Excellent primer before overcoating  with powder or 2K paint products Good resistance to mechanical abrasion Excellent adhesion over grit blasted steel Extremely flexible Can be applied in extreme temperatures Weldable to X-ray quality Certified as non-flammable Unlimited shelf-life & unlimited pot-life Also Available: 500ml aerosol spray, 1KG Coating, 5kg,   25kg CAUTION:   When using cellulose or solvent-borne acrylic automotive primers, the Zinga cold galvanising system must first be sprayed with a water-based barrier coat. Zinga solve is the recommended thinner to be used with  Zinga Cold Galvani Zinc Coating when spraying. It can also be used for cleaning when using Zinga. Coverage: In practice, the quantity of Zinga required to coat a given area is dictated by both the required dry film thickness (DFT) & the depth of the blast-profile. As a guide to coat 1m 2 of steel with a Blast profile of 60micons Rz, at a DFT of 60microns (with no wastage) will require 0.41kg of Zinga. Or coverage equates to 2.41sqm per 1kg of Zinga. Read: " How ZINGA Works " from Technical Articles for more infomation Zinga Trouble-Shooting Chart ...

Zinga is not paint. It is a pure zinc coating (with no pigments or extenders etc) & it will physically galvanise a car body or chassis & provide a great many years of protection against rust in any form. All conventional 2K automotive paints as well as basecoat or clear automotive paints can over coat Zinga. It can be primed with all standard 2K primers. Zinga Cold Galvani Zinc Coating  is a one-component anti-corrosion zinc coating system which contains a minimum of 96% zinc in the dry film. Its unique formula provides environmentally safe cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint. KEY FEATURES Longer protection than hot-dip galvanizing applied to the same thickness On site application by brush, spray,  aerosol or dip methods Can be applied on top of existing galvanising, existing or damaged Zinc thermal spray or a previously applied layer of Zinga Can be overcoated with most topcoat systems More than double the service life when used as part of a 2 stage system. E.g Excellent primer before overcoating  with powder or 2K paint products Good resistance to mechanical abrasion Excellent adhesion over grit blasted steel Extremely flexible Can be applied in extreme temperatures Weldable to X-ray quality Certified as non-flammable Unlimited shelf-life & unlimited pot-life Also Available: 500ml aerosol spray, 1KG Coating, 5kg,   25kg CAUTION:   When using cellulose or solvent-borne acrylic automotive primers, the Zinga cold galvanising system must first be sprayed with a water-based barrier coat. Zinga solve is the recommended thinner to be used with  Zinga Cold Galvani Zinc Coating when spraying. It can also be used for cleaning when using Zinga. Coverage: In practice, the quantity of Zinga required to coat a given area is dictated by both the required dry film thickness (DFT) & the depth of the blast-profile. As a guide to coat 1m 2 of steel with a Blast profile of 60micons Rz, at a DFT of 60microns (with no wastage) will require 0.41kg of Zinga. Or coverage equates to 2.41sqm per 1kg of Zinga. Read: " How ZINGA Works " from Technical Articles for more infomation Zinga Trouble-Shooting Chart ...

Zingasolv is the recommended solvent to be used for thinning Zinga Cold Galvani Zinc Coating when spraying. It can also be used for cleaning when using Zinga. 1 Litre Read: " How ZINGA Works " from Technical Articles for more information ...

Zingalufer provides a protective seal against salt & chemical exposure. It can be used as an intermediate layer or topcoat for an existing layer of  Zinga in immersed or chemical environments, for example ship hulls & sewage works. As part of a Duplex system with  Zinga  (or any zinc coating), the internationally recognised " Mist Coat" technique is required to ensure a trouble free application. Please view the tech-sheet for a comprehensive guide. Zingalufer is available in Litre tins & cures to a matt silver grey finish. ...